Re: Thrust Line & Bellyboard

HawkiDoug <hawkidoug@...>

You do have the belly board plans right? If not, they are on the web site in pdf format under Resources/Plans. I assume you have them but if not go there and get them.

Doug "Hawkeye" Humble
Omaha NE

----- Original Message -----
From: "Sam Hoskins" <shoskins@...>
To: <Q-LIST@...>
Sent: Wednesday, March 02, 2005 8:04 PM
Subject: RE: [Q-LIST] Thrust Line & Bellyboard

I would do the layup on the unblemished belly. After that's done, then dig
out the foam per plans. I have now idea about the orientation. Maybe one
of our composite engineers could chime in.



From: Joseph Snow [mailto:1flashq@...]
Sent: Wednesday, March 02, 2005 7:20 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Thrust Line & Bellyboard

Ok, that makes sense. I could cut out the 10" x 11" skin, remove 1/8" foam,
then vacuum bag the layup. Any idea on orientation of the carbon fiber
cloth, i.e., front to back, side to side, 45 deg. ? I have never used
carbon fiber cloth. Should it be Uni or Bid?


Quickie Builders Association WEB site

Yahoo! Groups Sponsor


oups/S=1705065618:HM/EXP=1109899209/A=2593423/R=0/SIG=11el9gslf/*http:/www.n> click here



Yahoo! Groups Links

* To visit your group on the web, go to:

* To unsubscribe from this group, send an email to:

* Your use of Yahoo! Groups is subject to the Yahoo!
<> Terms of Service.

Quickie Builders Association WEB site

Yahoo! Groups Links

Join { to automatically receive all group messages.