Thanks Jim, Ill check it out.

Ron T

Ron & Carolyn Triano Q-200 N4710P

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jim
Patillo
Sent: Tuesday, May 03, 2005 7:32 AM
To: Q-LIST@...
Subject: [Q-LIST] Re: Exhaust System.


Ron,

There's a place in Redwood City that ceramic coats exhaust pipes with
a process called Jet Hot. They wire clean the inside and outside and
coat both sides. They mainly do racing headers but will do airplanes.
My 4:1 cost $75.00 for the full monty. I've done mine twice. It
works very well.

Colors are white, black and aluminum.

Jim P.

--- In Q-LIST@..., <rondefly@r...> wrote:

Is this Ceramic coat a dipping process or did you just spray the

exterior?

Ron & Carolyn Triano Q-200 N4710P

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On

Behalf Of

Greg & Debbie Merrill
Sent: Tuesday, May 03, 2005 5:01 AM
To: Q-LIST@...
Subject: RE: [Q-LIST] Exhaust System.

Ditto!

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On

Behalf Of

Jerry Marstall
Sent: May 2, 2005 8:00 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Exhaust System.


I had it done for the 4 into 1 on my Revmaster. Not only did it

help

with heat reduction in the cowling, you don't have rusty pipes.
Jerry

Mike Dwyer wrote:

Hey Qers.
I had written about putting together a stainless exhaust system

and ...

you were right, it is next to impossible to bend that stuff. It

appears

only the mandrel bend machines can touch it.

Now I'm thinking about using steel to make a 4 pipe system. Each

pipe

will exit at the bottom near the oil sump. I checked out this

place

that ceramic coats the pipes, $20 per foot. They say it keeps the

heat

in the pipes better. Does anyone here believe that or is it a

waste of

money?

Thanks,
Mike Q200



Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links

Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links









Quickie Builders Association WEB site
http://www.quickiebuilders.org





_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...
<mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms

of

Service < http://docs.yahoo.com/info/terms/> .

Quickie Builders Association WEB site
http://www.quickiebuilders.org





_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...
<mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .





Quickie Builders Association WEB site
http://www.quickiebuilders.org




------------------------------------------------------------------------
*Yahoo! Groups Links*

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/
* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...
<mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/>.