As I recall the white coating is 1300 degrees and the black
andaluminum is 2400 degrees.

Jim P

--- In Q-LIST@..., "Dave" <dave@h...> wrote:

Thanks! I had heard between $175 and $225 for the Revmaster pipes.

Jim got a good deal for only $75. Jim, Do you recall if you got

the

1300 or 2400 degree stuff?

Dave

-----Original Message-----
From: Greg & Debbie Merrill [mailto:q2pilot@r...]
Sent: Tuesday, May 03, 2005 4:14 PM
To: Q-LIST@...
Subject: RE: [Q-LIST] Exhaust System.

Dave
Don't recall the temperature rating as it was almost 7 years ago

when I

had
my pipes done. The finish is the standard silver(ish) color and as

I

recall,
the cost was around $175. They do nice work! Almost forgot, this

was for

the
Revmaster 2100D 4 into 1 exhaust system.

Greg

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On

Behalf Of

Dave
Sent: May 3, 2005 1:18 PM
To: Q-LIST@...
Subject: RE: [Q-LIST] Exhaust System.


Hi Greg,

Did you use the 1300 degree or the 2400 degree stuff?

Do you recall what you paid for them to do yours? (Q2 or Q200)?

Thanks,

Dave Richardson

-----Original Message-----
From: Greg & Debbie Merrill [mailto:q2pilot@r...]
Sent: Tuesday, May 03, 2005 1:10 PM
To: Q-LIST@...
Subject: RE: [Q-LIST] Exhaust System.

This is the place I used and they do nice work!

http://www.jet-hot.com/

Greg

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On

Behalf Of

rondefly@r...
Sent: May 3, 2005 8:49 AM
To: Q-LIST@...
Subject: RE: [Q-LIST] Exhaust System.


Is this Ceramic coat a dipping process or did you just spray the
exterior?

Ron & Carolyn Triano Q-200 N4710P

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On

Behalf Of

Greg & Debbie Merrill
Sent: Tuesday, May 03, 2005 5:01 AM
To: Q-LIST@...
Subject: RE: [Q-LIST] Exhaust System.

Ditto!

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On

Behalf Of

Jerry Marstall
Sent: May 2, 2005 8:00 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Exhaust System.


I had it done for the 4 into 1 on my Revmaster. Not only did it

help

with heat reduction in the cowling, you don't have rusty pipes.
Jerry

Mike Dwyer wrote:

Hey Qers.
I had written about putting together a stainless exhaust system

and ...

you were right, it is next to impossible to bend that stuff. It

appears

only the mandrel bend machines can touch it.

Now I'm thinking about using steel to make a 4 pipe system. Each

pipe

will exit at the bottom near the oil sump. I checked out this

place

that ceramic coats the pipes, $20 per foot. They say it keeps

the heat

in the pipes better. Does anyone here believe that or is it a

waste of

money?

Thanks,
Mike Q200



Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links

Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links









Quickie Builders Association WEB site
http://www.quickiebuilders.org





_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...
<mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms

of

Service <http://docs.yahoo.com/info/terms/> .







Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links











Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links