Re: Fuel filler problem and brake seals.
|
Paul Buckley
Ah, now I get it.
toggle quoted message
Show quoted text
Originally I thought you meant that the header was essentially empty unless the main was full. Thanks for the clarification, Larry. Paul Buckley Cheshire, England. TriQ-200 Still building................................ ----- Original Message -----
From: larry severson To: Q-LIST@... Sent: Tuesday, May 10, 2005 11:28 PM Subject: Re: [Q-LIST] Re: Fuel filler problem and brake seals. >You are a man of (too) few words. >I still do not understand your fuel system or your 'problem'. > * 1. I have a fuel cap in the header tank. > * 2. There is a 2" PVC pipe starting 2.5" below the cap that goes down > and back to the main tank. > * 3. There is a tank vent at the rear of the header tank that goes > down and forward. > * 4. Until the main tank is filled, the last 2.5" of header tank can > not be filled. > * 5. I just found a solution for the potential of trapping fuel in the > vent - drill a very small hole at the back of where the vent turns forward. Larry Severson Fountain Valley, CA 92708 (714) 968-9852 larry2@... Quickie Builders Association WEB site http://www.quickiebuilders.org ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ b.. To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. ------------------------------------------------------------------------------ Internal Virus Database is out-of-date. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.5 - Release Date: 04/05/2005 ---------- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.8 - Release Date: 10/05/2005 |
|
|