All,

Please forgive as I am new to this and still learning. I did not build but bought a highly modified TW plane that is said to be a combination of DF/Q2/Cessna ? It is a trike with an LS1 so I have been watching all posts on both pages and now have some questions.

1) Has this only happened to LS1 canards ?
2) Has this only been Q200 s ?
3) What is the configuration of the planes with failures (tri or taildraggers) ?
4) Is the over board Muff heat being dumped just infront of the area failing ?

On either this page or the Dfly page there was a recent post regarding paint color and caution based on the foam will deteriate at 180 F so UV relate heat becomes an issue with dark colors. If this failure is on Q200 s that many have the O235 with an operating oil temp around 212 F could there be heat damage occuring to the internal foam thereby weaking the canard interior strength allowing the failure ?

As stated I am new and ignorant on most matters as well as the specifics of the planes that have had failures. Just some questions based on high level knowledge - trying to see if there is a correlation that can be built.

Thanks,
Tad Simpson
N1007P
Still Learning



Quickie Builders Association WEB site
http://www.quickiebuilders.org





---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



---------------------------------
Do You Yahoo!?
Yahoo! Small Business - Try our new Resources site!