Re: W & B


Jim Patillo
 

I thought it was 14.5" I will check again.

Jim P


--- In Q-LIST@..., "Dave" <dave@h...> wrote:
The front of the firewall is considered 14". So if you measured the
tail support relative to the firewall, add 14 to the measurement to
get
the station. That's the same as dropping a plumb bob from the
firewall
and measuring 14" toward the nose of the plane and measuring your
tail
support from that "zero" point 14" ahead of the firewall.

Dave

-----Original Message-----
From: Doug Humble [mailto:hawkidoug@c...]
Sent: Monday, September 12, 2005 11:25 AM
To: Q-LIST@...
Subject: Re: [Q-LIST] W & B

You have confused me Dave. I add 14" to my numbers or subtract
14"? For

instance; my tail wheel support was 186.25" rear of the front of
the
firewall. So do I add 14 " (200.25) or subtract 14" (172.25)?

From my notes from last time, it appears I added 14"

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "Dave" <dave@h...>
To: <Q-LIST@...>
Sent: Monday, September 12, 2005 9:36 AM
Subject: RE: [Q-LIST] W & B


The front of the firewall is 14".

Dave Richardson
Tri-Q2 825DR 31.5 hrs

-----Original Message-----
From: Doug Humble [mailto:hawkidoug@c...]
Sent: Monday, September 12, 2005 10:34 AM
To: Q-List
Subject: [Q-LIST] W & B

My Quickie book is at the airport. Does anyone have it handy and
could
you tell me how many inches in front of the firewall the reference
point
is to calculate weight & balance???
Thanks!

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974






Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links









Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links

Join main@Q-List.groups.io to automatically receive all group messages.