Re: Quickie molds and plug


David J. Gall
 

Damain,

I suppose that you also have the means to do a three-D survey of the
shape... with the obvious intent that it could then be scaled and finessed
into a slightly larger shape, to accommodate an O-320 and two people WITH
baggage, and enough fuel...!


David J. Gall

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]
On Behalf Of damiantwinsport@...
Sent: Friday, September 23, 2005 7:14 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Quickie molds and plug

David , yes and yes. I also have a plan for using the plug to
build a hi temp CF tool to enable the use of pre-preg
materials. I have several hundred pounds of CF tooling cloth
just sitting looking for a project.

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: David Gall <David@...>
To: Q-LIST@...
Sent: Fri, 23 Sep 2005 06:06:16 -0800
Subject: Re: [Q-LIST] Quickie molds and plug


Damian,

I'll take that to mean that you are acquiring the molds and
plug. Do you also have the process description for the shells
(materials, layup schedule, etc.)?


David J. Gall


----- Original Message -----
From: damiantwinsport@...
To: Q-LIST@...
Subject: Re: [Q-LIST] Quickie molds and plug
Date: Fri, 23 Sep 2005 03:52:54 -0400


Peter, I am on it.

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Peter Harris <peterjfharris@...>
To: Q-LIST@...
Sent: Fri, 23 Sep 2005 03:15:42 +1000
Subject: Re: [Q-LIST] Quickie molds and plug


Whatever please don't lose these molds.
Peter
----- Original Message -----
From: RICHARD GLIMES
To: Q-LIST@...
Sent: Friday, September 23, 2005 9:03 AM
Subject: Re: [Q-LIST] Quickie molds and plug


WERE THE MOLDS AND PLUG FOR THE Q-1,OR THE Q-2,Q-200?

RICHARD GLIMES

"jcrain2@..." <jcrain2@...> wrote:
I received this note from Eric several weeks ago. He
wonders if anyone is
interested in the molds and plugs. I don't know if he
wants any money but
here
is the note. I have his e-mail address if anyone is interested.

Bruce Crain
N96BJ



I have the fuselage molds and original plug. Think
anyone might be
interested?

Eric Beeson
720-201-7992
9751 Majestic Drive
Longmont, CO 80504

Join main@Q-List.groups.io to automatically receive all group messages.