Re: aluminum spinner - ACS SN-4?


David Chalmers <David@...>
 

Thanks for the info. I'll keep an eye on it. I agree with you - purchasing and installing a spinner is a big PITA. ACS don't give enough information about each spinner and don't seem to really want to sell you one. In the end I bought several to figure out which one would work. Getting the darn thing to fit the prop and be dead straight is a project in itself. If you could buy one pre cut for your prop it would be worth every penny.

Dave Chalmers
TriQ200 N4016G 250hrs
Redmond WA

-----Original Message-----
From: shoskins@mchsi.com [mailto:shoskins@mchsi.com]
Sent: Thursday, January 12, 2006 9:07 AM
To: Q-LIST@yahoogroups.com
Subject: RE: [Q-LIST] Re: aluminum spinner - ACS SN-4?


Apparently the plate/tubing combination was not rock solid and some movement
occurred. This movement flexes the back plate and develops cracks. The cracks
appear as very thin black lines on the backplate, often around the
circumference of the crankshaft flange.
Sam

Join main@Q-List.groups.io to automatically receive all group messages.