Re: Vortex Generator spacing templates


Paul Spackman
 

The reason for not providing the jpg is that it will not print to the proper size. There are several free readers available and then check the measurement, it should be 10 1/8" overall. I will change the files and add this measurement this evening. If all else fails contact me with a fax number and I will fax you a copy if you have the GU canard.

Paul

--- In Q-LIST@..., "HAROLD DIRKS" <hardot7776@...> wrote:

Paul,

How about converting these files to jpg format so those of us without CAD software can see them?


----- Original Message -----
From: Paul S<mailto:wypaul2001@...>
To: Q-LIST@...<mailto:Q-LIST@...>
Sent: Tuesday, October 06, 2009 5:47 PM
Subject: [Q-LIST] Vortex Generator spacing templates


I have downloaded a couple of vortex generator templates for the GU canard. One with wide spacing and one with narrow spacing. I am using the wide spacing suggested by Keith Welsh that uses about 1/2 as many generators and it is doing the job very good.

http://groups.yahoo.com/group/Q-LIST/files/VG%20Templates/<http://groups.yahoo.com/group/Q-LIST/files/VG%20Templates/>

Paul






Join main@Q-List.groups.io to automatically receive all group messages.