Re: Oil consumption


Jerry Marstall
 

I have 320 hrs on new ECI cylinders and having the same experience that Lynn is having.  Very satisfied with them.
Jerry

On 12/20/2013 11:02 PM, N142LF wrote:
 
When I got my engine it had chrome cylinders that never really broke in right. So after several hundred hours I broke down and put on ECI cylinder and piston assemblies ( of course I had to mess with compression, EFI, ignition, ect. as well ). When the ECI's were broke in I very seldom add oil between oil changes. I will let others pipe up, but there are some on the list with that same or better performance. Some would say oil consumption is good, but I always thought it was a hassle. 
LJ 

Short & simple from my mobile 

On Dec 20, 2013, at 8:18 PM, Mike Dwyer <q2pilot@...> wrote:

Ok, got me curious.  New cyl or new engine?
Thanks & Merry Christmas!

Mike Dwyer

My YouTube channel: http://goo.gl/ddljYZ
My Vimeo Videos: http://goo.gl/bsaLsG
My Website: http://q200.eu.pn/

On Dec 20, 2013 4:44 PM, "N142LF" <n142lf@...> wrote:
 
But if you do upgrade, there are options that give you 20+ hours per quart. Still may not be worth it unless you are doing it for other reasons, but that is the route a few of us have gone. 
L J French

Short & simple from my mobile 

On Dec 20, 2013, at 3:33 PM, Mike Dwyer <q2pilot@...> wrote:

Thank you all for the input.  So my better than average engine has slowly degraded over the years to average!  I will do the compression test and borescope soon.  Will report back what I find but otherwise the CYL are like $800 times 4 so maybe oil is cheaper!


Mike Dwyer 
Q200 N3QP


My YouTube channel: http://goo.gl/ddljYZ
My Q200 Website: http://q200.eu.pn/


On Fri, Dec 20, 2013 at 8:53 AM, <danchar18@...> wrote:
 

I just looked in my 0-200 manual and it says the average oil consumption is 1/3 qt per hr



Join main@Q-List.groups.io to automatically receive all group messages.