Re: Revmaster to o-200 conversion
Bite the bullet.Do what already works (incidence). Dont try to make a silk purse out of a sow's ear... or re-engineer.toggle quoted message Show quoted text
From: john.hartley1@... [Q-LIST]
Sent: Fri, Aug 21, 2015 6:18 pm
Subject: Re: [Q-LIST] RE: Revmaster to o-200 conversion
After 14 hours on the new engine, I was experimenting lower power than I expected and an excessive amount of oil coming from the crankcase breather. I found plans for and made a contraption that measures crankcase pressure. Mine was excessively high, leading me to believe I was experiencing some piston blowby.
Since I recently jettisoned my second wife and am now single ($), I bought 8 new Superior Millennium cylinders (4 for the Tri-Q200 and 4 for my Cessna 150). The 150's cylinders were shipped to my house and the Quickie's were sent to LYCON for some tweaking. LYCON installed 10:1 NFS pistons and port, polished and flow matched the cylinders.
When all 8 cylinders made it home (couple weeks turn around from LYCON) I was able to compare the stock ones to LYCON's. These gentlemen do an extremely nice job.
All 8 are installed on their respective aircraft. The master solenoid on the Cessna went bad and is on order, so I haven't flown it yet. I have flown the Q2, however, and it has come to life. It picked up 190 static rpm (2550 vs 2360) turning the same 60x70 Sterba prop and 20 mph indicated (170 vs 150). The engine isn't broken-in so I haven't pushed it too hard yet.
In the essence of experimenting/tinkering, I pulled the engine off of the plane today to prep it for its next upgrade - SDS EM5 4F fuel injection and digital ignition. Ross from SDS has been a big help so far and needed only 3 days to build my system (after we hammered out all of the details). The system is supposed to be here Monday.
While I've the plane torn down again, I'm going to tackle some of the things that've bugged me for a while. On one of which, I'd appreciate some input. At high speeds, the nose tucks down; the faster the speed, the more the tuck. At 170mph, it's an uncomfortable amount. At 200mph, it's as much as I'm willing to put up with. The thought of removing the canard to increase the incidence (it's the LS1 and was originally installed with 0°) is uncomforting but not insurmountable. I'm thinking that the other approaches would be to increase the size of the sparrow strainers or install the t-tail.
Tri-Q200: 16 hours