Re: ADSB


Jay Scheevel
 

The only problem you have Bruce, is trying to decide which plane to leave on the ground!  Sorry, could not resist. Merry Christmas to you and the entire group!

 

Cheers,
Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Bruce Crain
Sent: Tuesday, December 24, 2019 10:54 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] ADSB

 

Sorry.  I installed the Uavionics in my RV 6 so finding a ground plane was not a problem.

B



On Dec 24, 2019, at 10:48 AM, Joanne Crain <jcrain2@...> wrote:

Hi Jim,  

I used the same Uavionics unit as you.  After adjusting the sensitivity in the unit as per company rep is works great and passed the test last week!  The test is elective but it assures you that everything is ready to meet the 2020 mandate.

Merry Christmas and Happy New Year!!

Bruce Crain



On Dec 23, 2019, at 8:26 PM, Jim Patillo <logistics_engineering@...> wrote:



Hi all,

I finally installed ADSB last week. I chose Uavonics Echo UAT/ SkyFX. OUT/IN. Flew and Passed the FED test first time with no squawks. Very  easy install with only two wires (power&ground). Hooked up to iPad/iPhone using Seattle Avionics “Q Fly” software for flight planning, traffic and weather. 

I used the  “switched” battery master solenoid with 3 amp in line  fuse  for “power” and battery negative for “ground”. I would recommend this unit.

Jim Patillo
N46JP - Q200



  

 

 

Join {main@Q-List.groups.io to automatically receive all group messages.