Re: First air-to-air shots of N8WQ


Sam Hoskins
 

As previously mentioned, I swap out the nylaflow with every canard change.

Sam 

On Mon, Feb 10, 2020, 5:03 PM Jerry Marstall <jnmarstall@...> wrote:
As we know, nothing lasts forever. I swapped mine out for more nylafow around the 10 yr point. About time to do again. Jerry 

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 2/10/20 1:01 PM (GMT-05:00)
Subject: Re: [Q-List] First air-to-air shots of N8WQ

I know that Ray’s EZ was built 28 years ago, and to my knowledge, he had not replaced the lines since then.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jerry Marstall
Sent: Monday, February 10, 2020 10:42 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] First air-to-air shots of N8WQ

 

For those who have experienced nylaflow failure, how long had the lines been in service?

 

-------- Original message --------

From: Jay Scheevel <jay@...>

Date: 2/10/20 11:49 AM (GMT-05:00)

Subject: Re: [Q-List] First air-to-air shots of N8WQ

 

Hi Mike,

 

Jim P can confirm whether I am correct or now, but I think that he (Jim) has had a failure in one of his nylaflow lines, and it was in the outer third of the wing, not close to the wheel.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Dwyer
Sent: Monday, February 10, 2020 6:17 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] First air-to-air shots of N8WQ

 

That raises a question.  Has any Tail Dagger Q had a nylaflow failure?  The nose wheel versions can really stand on the brakes so the Tri-Q might benifit from better brake line.  

 

Mike Q200 N3QP

 

On Mon, Feb 10, 2020, 01:46 Jim Patillo <Logistics_engineering@...> wrote:

Thanks Jay,
  
I’ll let Ray know you’re thinking about him.

I plan on using AN2 S/S braided Teflon, 3,000 psi. Do you see any issues running AN2 full length from caliper to brake cylinders on rudder pedals, other than the difference in weight? Just curious. 

Jim

N46JP Q200

Join main@Q-List.groups.io to automatically receive all group messages.