Re: Brake (Anvil) Rubbing Tire


Corbin
 

Awesome....I will go back and look at some old photos that I took to make sure I place them just like they were.  I’m 100% sure I took photos the very first time I worked on the brakes.

Corbin

On Mar 26, 2020, at 2:12 PM, Martin Skiby <mskiby@...> wrote:

Corbin,
The washer placement on the mounting of the caliper was key to getting it to not hit when we put it together.  Make sure all of the washers are exactly where they were.  I believe there were washers used as spacers under the caliper mount.

That it about all the advice I have on that one without seeing it.

-----------------------------------------

From: "Corbin via Groups.Io"
To: main@Q-List.groups.io
Cc:
Sent: Thursday March 26 2020 11:56:49AM
Subject: Re: [Q-List] Brake (Anvil) Rubbing Tire

It is so dark up in the wheel well that I couldn't get a good one.  I will take my endoscope camera out there next time and get a photo/video.  

Corbin

On March 26, 2020 at 1:42 PM, Jim Patillo <Logistics_engineering@...> wrote:

You have a pix?
Jim
N46JP - Q200

Sent from Outer Space

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via Groups.Io <c_geiser@...>
Sent: Thursday, March 26, 2020 11:38:36 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: [Q-List] Brake (Anvil) Rubbing Tire
 
Hey guys,

Some of you saw my photos of the dried brake fluid on my brake caliper and now I have another brake related issue I need your experience to help with.  First, I was able to get the caliper all cleaned up and everything looks good so I am going to keep an eye out for small leaks. 

Now my problem is that the anvil (inside part of the brake caliper) is rubbing up against the tire.  No matter how I try and line it up it still rubs the tire just enough to stop it from spinning freely.  I even thought maybe I have too much air in the tire causing it to bulge out too far.  I will double check that in coming days just in case.  I thought I might could get a grinder and grind down the anvil a 1/4 inch or so.....

Any other thoughts?  I am certain the anvil is correctly installed onto the caliper and the bolts have no issues lining up and going in.  

Corbin

--

Corbin 
N33QR




--

Corbin 
N33QR

Join main@Q-List.groups.io to automatically receive all group messages.