toggle quoted messageShow quoted text
I hate that snap sound! I might have tried some heat on it... Sounds like you had fun with it tho...
My non-flight report. Our International Airport is down to one partial runway as they re-pave the intersection. This has caused huge traffic jams with the commercial airliners and C130's and everyone on one taxiway. I just haven't been wanting to mix it up with them. But due to the virus it looks like most of the commercial airliners are now parked! I saw 8 737's just sitting there today. Maybe I got to go give flight a try again! Crazy world.
On Tue, Mar 31, 2020 at 2:08 PM Jay Scheevel <jay@...
I keep finding ways to increase my time spare spent working on my plane.
For example, I thought I would give everything under the cowl a good going over last weekend, then go fly. I tightened up a bunch of hose clamps (got lots of those), checked my throttle linkage and magneto connections, saw an o-ring that had worked its way out on the starter housing, so pushed that back in place and tightened the AN-3 housing bolts down on that...SNAP... twisted one bolt off!. Got the EZ-out kit out (why do they call them that anyway?). drilled a very small hole in the 3/16" chunk left in the hole housing....(of course they used a thread locker on that)... worked the EZ-out into the hole and gently twist to remove the remaining bolt...SNAP!...broke off the EZ-out, removed the starter housing from the engine, and took it home to my shop with some diamond mills and milled out the EZ-out and most of the bolt end, started chasing the threads with a tap, twisting the tap by hand...SNAP!...twisted off the tap, more diamond milling, finally, got a workable hole, bought another tap, drilled out the hole, successfully tapped a new hole, put the starter back together. Mission successful...wasted 3 days of Coronavirus isolation time, just getting back to where I was last Saturday.
Sorry no flight report, but a cautionary tale that when using those hardened steel tools: they flex a little, but they snap off easier than you think they will and the consequences get worse each time they do.
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Bruce Crain
Sent: Tuesday, March 31, 2020 11:47 AM
Subject: Re: [Q-List] Cowl Exit
Something every day Richard. Even if you just tidy up or move tools around. It keeps you moving ahead.
> On Mar 31, 2020, at 3:39 AM, Richard Thomson <richard@...> wrote:
> Thanks Bruce, now I see, only problem is I need to make a new gear leg fairing first .
> More isolationist activities to do.
> Rich T
>> On 30/03/2020 22:05, Bruce Crain wrote:
>> Here is a good picture of how I mounted the red baffling material.
>> Airventure is only 4 months away! Makes for a great reason to work hard and get em dome! Also Spring Fling and Field Of Dreams are two other great “get away” parties!
>> Bruce Crain