Re: KITPLANES - September 2006 - Las Vegas Quickie


Reginald Clarke <airryder@...>
 

Hello Jay,
That beautiful XPRESSO Subi-Q2 is a mess Canard’s Brocken back wing twisted prop about 2” blades.fuslage  Etc etc etc. I sold it and the new owner didn’t think he needed the help,so he was going to teach himself. doing fast taxes down runway it started to lift off and he got into PIO’s and not so pretty anymore  
Good to here your flying know I hope your staying safe
Sincerely 
Reg CLARKE





On Apr 14, 2020, at 09:57, Jay Scheevel <jay@...> wrote:



Hi Reg,

 

Long time, no hear. What is the status of your previous ride, that beautiful Expresso Subi-Q2? 

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Reginald Clarke via groups.io
Sent: Tuesday, April 14, 2020 8:30 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] KITPLANES - September 2006 - Las Vegas Quickie

 

To Corbin,

What I’ve done meany times is sand the foam out from the bottom side with from 40 to 80 grit sandpaper and remove and make a pocked so your can lower your pelvis down. Take it slow a little at time.  When I make seats I use closed cell high density furniture foam and you can get it in soft to firm. Density at least 2.5 

I’m in the upholstery business and have made meany seats

If it’s the memory foam in there it may be more difficult to sand but give it a try

 

Sincerely, Reg C

 

 

 



On Apr 14, 2020, at 08:07, Bruce Crain <jcrain2@...> wrote:



The memory foam is designed to be stiff until it warms up to your body.  Then it softens and will let you down a bit.  You may need to tighten your seat belt a bit when it lets down.

You could develop a slump for a while.  No you don't have to "sit up straight" like in elementary school.  wink_smile

If you have multiple strips of memory foam as per plans you can always take out 1 or two.  I think 3 is the norm but I only used 1 of the stiffer choices as when it softens it is best to have the stiffer type.  You may need to have your upholsterer take it down a notch.  

As Jay stated my seats are very comfortable mostly due to the lay back angle doesn't put much pressure on my Popo!  red_smile

Bruce

Please note: message attached

From: "Corbin via groups.io" <c_geiser@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] KITPLANES - September 2006 - Las Vegas Quickie
Date: Mon, 13 Apr 2020 21:26:21 -0000

<mime-attachment>

Join main@Q-List.groups.io to automatically receive all group messages.