toggle quoted messageShow quoted text
Well, I think I am just baffled because the Faucet pump (same model) I had before did not tick like this unless fuel was low. Then it started ticking all of a sudden and the replacement one does too. I am actually not too concerned about fuel flow as it is clearly pumping faster than fuel going from header to the engine.
On April 29, 2020 at 11:57 AM, Jim Patillo <Logistics_engineering@...> wrote:
Corbin as you may know the Facet pump does make a ticking noise when pumping. Since you are concerned with the new one, hook up a line to the output side of the pump and flow it to a can. If you are flowing 1.5 -2 times the required fuel burn you should be good to go.
You may also want to stand the pump off the canard with rubber. That limits the noise transfer to the canard.
From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Wednesday, April 29, 2020 8:43:18 AM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Update: Faucet Fuel Pump Ticking Sound w/ Plenty of Fuel
Thanks Ady....no, just 100LL.