- Those with Light Speed Electronic Ignition...
Re: Those with Light Speed Electronic Ignition...
toggle quoted messageShow quoted text
Hey Corbin is that Dual ignition or are you running one mag ?
On 04/09/2020 19:52, Corbin via
Thanks Jay. Jim’s been a great help over the phone the last
couple of days.
Me, Jim, and Kevin all have different versions of the Light
On Sep 4, 2020, at 1:25 PM, Jay
Scheevel <jay@...> wrote:
I think that Jim Patillo has a
lightspeed. Is that right Jim. Any ideas for Corbin?
like you could to me as well. The only thing that makes
me second guess that is the install manual makes a point
to notate the sensor wire needs to “point” clockwise
(right/to the pilot side) on top and bottom.
Sep 4, 2020, at 12:17 AM, David J. Gall <David@...>
It looks to me like you could
just install the mount as assembled at the factory,
but put it on the left side of the case split line
under the nuts instead of under the heads of the
David J. Gall
Well, I have noticed a few
mistakes in the manual so far. For instance,
there are no stainless steel flush screws and no
circuit board to install. Many steps should be
updated and omitted.
I contacted Klaus but that
didn't go anywhere. I am 99% sure he installed
the sensor incorrectly. I just can't see how it
would be correct.
Do exactly what the
instructions say. If you are unsure call or
send Klaus an email. He doesn't make many
Now I see your other email. I think I see
what you mean. Yes, the mounting bracket
should go left of centerline but the
sensor should be on the right side of the
mounting bracket. So I am still thinking
it was sent incorrectly.
Join main@Q-List.groups.io to automatically receive all group messages.