1. posterid:2068327
  2. Those with Light Speed Electronic Ignition...

Re: Those with Light Speed Electronic Ignition...

Rick Hole
 

I like Klaus' sensor.  I've installed a bunch of the previous with a circuit board for the ring. That was a pain in the neck.  Ulimately you need the sensor to align with the magnet at TDC and both magnets to center over their corresponding sensors.
A Klaus story: I had one plane where two plugs would not fire.  I narrowed it to a defective coil.  I replaced the coil from a spare unit succesfully.  Klaus would not sell me a coil as he had never seen one fail.  He insisted it must have been an installation error.  I brought a coil elsewhere.  
Yes he can be difficult. But he has a good product.
Rick Hole

On Sun, Sep 6, 2020, 2:08 PM Corbin via groups.io <c_geiser=icloud.com@groups.io> wrote:
Let’s hope so.  I was able to get both sensors and the plate mounted yesterday morning.  Pic below of the top one.



Corbin

On Sep 6, 2020, at 2:30 PM, Michael <dunningme@...> wrote:

I think you're right about flipping it, Corbin. It looks to me like if you unbolted it, rotated it 180°, and swapped it to the other side that the parts markings/lettering would match up to what's shown in the manual.
<Screenshot_20200906-142447.png>

--
-MD
#2827 (still thinking about planning on visualizing how to finish building)

--

Corbin 
N33QR

Join main@Q-List.groups.io to automatically receive all group messages.