Re: Those with Light Speed Electronic Ignition...

Rick Hole

I second that.  At Velocity we learned nit to out them there.  When hot they would malfunction 
Rick Hole 

On Tue, Sep 8, 2020, 6:27 PM Mike Dwyer <q200pilot@...> wrote:
One possible issue.  After shut down the area at the top of the cowl gets very hot!  I always try to point the Q into the wind and open the oil check door to try and keep that heat down.  Coils may not like that heat much?  You may want to put a thermocouple up there to see what it's doing.
Fly Safe,
Mike Dwyer

Q200 Website:

On Tue, Sep 8, 2020 at 5:54 PM Corbin via <> wrote:
For those interested,  here is where I have decided to mount the ignition coils. Both are below the highest point (the fuel spider).   The two that are mounted to the aluminum plate (nearest the magnet plate) will actually be mounted below the plate;  I didn't have the right hardware so just temp mounted for the photo.



Join { to automatically receive all group messages.