1. posterid:2068327
  2. Beginning labor pains

Re: Beginning labor pains #photo-notice

Rick Hole
 

As you are planning inboard land gear, the strength required at the tip of the canard is much reduced.  With the gear at the ends of the canard I would not touch a repaired spar under any circumstances.  There might be wiggle room in your configuration.  I am not qualified to address that.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Cody
Sent: Monday, November 9, 2020 9:38 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Beginning labor pains #photo-notice

 

https://youtu.be/aJkFnhqKkJw

Would this be a decent guide to potentially repairing the spar? At this point repairing can serve several purposes without risk. If its strong and works yay! If it doesn't work or I fail, then its good practice and we continue on with other options anyways. I don't feel like I have a lot to lose right now in playing with the option. Although my primary time and focus will be dressing out the fuselage, followed by the main wing. The canard can probably wait till near the end since its under consideration.

Join main@Q-List.groups.io to automatically receive all group messages.