Re: Nose Gear for Tri-Qs


Richard Kaczmarek 3RD
 

Tony is going to be the source for all the parts. He is the canard guy that has taken all that over from our shop.

Richard 

On Fri, Jan 29, 2021, 8:57 AM Bruce Crain <jcrain2@...> wrote:
If you have the fixture from Scott you should be good.  He built about 10 gears for me around 2004 and they worked great!  Glad you are making the nose gears!  The main gears are perhaps a bit easier to find although I don't know who to source for them.  Any idea?
Bruce
---------- Original Message ----------
From: "Tony Warnock via groups.io" <tony.warnock=yahoo.com@groups.io>
To: main@q-list.groups.io
Subject: Re: [Q-List] Nose Gear for Tri-Qs
Date: Thu, 28 Jan 2021 22:58:55 -0600

Bruce,

 
 These are being fabricated from the updated fixtures designed by Scott after multiple failures of the original nose gear. If there are updates that need to be made to the newer style legs that reduce shimmy, please advise.
 
Tony

 

On Jan 28, 2021, at 10:12 PM, Bruce Crain <jcrain2@...> wrote:

Make sure you have the correct angle with respect to the bottom front of the gear being further forward  at the bottom.  Otherwise it will shimmy
Bruce

---------- Original Message ----------
From: "Tony Warnock via groups.io" <tony.warnock=yahoo.com@groups.io>
To: "main@q-list.groups.io" <main@q-list.groups.io>
Subject: [Q-List] Nose Gear for Tri-Qs
Date: Thu, 28 Jan 2021 04:54:00 +0000 (UTC)

 

Hello Everyone!
 
 I have just completed all the machine work and bending of 5  new Tri-Q Nose gear assemblies. We will be doing the final welding this weekend and I hope to have them ready by Monday minus heat treatment. Two of these are already spoken for, so I will have 3 available. If interested please email me privately to discuss your specific needs and prices.
 
Tony




Join main@Q-List.groups.io to automatically receive all group messages.