Re: Motor mount backing plate

Sam Hoskins

The plans called for aluminum, but I found that when applying the proper torque, especially for the old 200, the plates deformed quite a bit. So I remade them in 1/8“ steel.


On Sun, Apr 25, 2021, 3:12 PM Tim <timmrlw@...> wrote:
Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.

Cheers, Tim

Join to automatically receive all group messages.