Re: Motor mount backing plate


Jay Scheevel
 

I also used steel. Good substitution.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Sunday, April 25, 2021 2:56 PM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Motor mount backing plate

 

Thanks guys

 

head down....chuga chuga 

 

On Sun, Apr 25, 2021 at 4:52 PM Sam Hoskins <sam.hoskins@...> wrote:

The plans called for aluminum, but I found that when applying the proper torque, especially for the old 200, the plates deformed quite a bit. So I remade them in 1/8“ steel.

 

Sam

 

On Sun, Apr 25, 2021, 3:12 PM Tim <timmrlw@...> wrote:

Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.


Cheers, Tim


 

--

 

Mike Steinsland

 

Join main@Q-List.groups.io to automatically receive all group messages.