- Quickie Q1 Canard and wing foam cut
Re: Quickie Q1 Canard and wing foam cut
toggle quoted messageShow quoted text
main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of
Tuesday, September 14, 2021 6:20 PMTo:
Re: [Q-List] Quickie Q1 Canard and wing foam cut
How does one get Q1 LS canard cores? I'm rebuilding my Q1 and would love to switch.
On Tue, Sep 14, 2021 at 4:56 PM Chris Walterson <dkeats@...> wrote:
Eugen-------------- Watching the video on Terry Crouchs' airplane he
mentions he has the LS canard. That would be the way I would go if doing
it over. I made the GU perform with the addition of VGs, but I think
Terry had the right idea.
As for brake lines and brakes, the original scrubbers are real weak.
I would use drum brakes and route out a slot down the entire canard
about 3/4 inch deep. Install some oversized plastic tubing and micro and
foam it in place. Doing this allows you to remove and replace any
Nyloseal that may fail. You could also run hydraulic lines in the larger
tube if you choose. take care------------ Chris
This email has been checked for viruses by Avast antivirus software.
Join main@Q-List.groups.io to automatically receive all group messages.