Edward. Have you seen my extensive version of the q200 canard plans?

One of the worst things quickie aircraft did was writing those plans and kept on referring back to the GU plan. It went back and forth so many times and it just pissed me off so I rewrote them so somebody could make sense of it. It's available on the quick head site and I think it's in the file section of the Q-list as well.

Take a look at what I wrote and see if that helps.

Sam

On Sun, Nov 7, 2021, 6:39 AM Eugen Pilarski <interbus@...> wrote:

Hello Q-Groupe,

so far the Canard is cut out from blue foam. The next steps are to cut the elevator BL10, BL49 and BL88 form the blue foam.

After study the foam cut section about the elevator, is not clear for me, which is the correct create position of the elevator templates. In my opinion, the templates are wildly laid out in the foam, at least that's my impression. Please find in the attachment Page 5-3 of the Q1 construction plans.

Please find in the attachment the Elevator BL10 and BL49 template, faced up together. So what is the correct fixing position?

Is that the center of the bore together with level line? or Is that the tail end together with level line? or ?

Maybe any one to the expert are able to make a short sketch and upload it to the file section ? 

Thank you for your support!

Best regards

Eugen