Re: Q2 Elevator Bushing?


David J. Gall
 

QCSM4? Isn’t that just a standard oilite shoulder bushing? It’s a press fit into a 5/16” hole into a 1/8” thick 2024-T3 Aluminum part (CS-17) and supports the 3/16” (IIRC) QCSM3 headless AN-bolt. Should be a standard FF303-01 oilite bushing from ACS: https://www.aircraftspruce.com/pages/ha/bushings/flangedbushings.php

I hope I’m not wrong….

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Robert Schmid
Sent: Friday, October 21, 2022 12:39 PM
To: main@Q-List.groups.io
Subject: [Q-List] Q2 Elevator Bushing?

 

I posted about this before and Jim jumped to the rescue with a Q200 part but unfortunately it didn't fit.

Anyone has a spare bushing please for the middle elevator hinge on my Q2 GA wing? Or if you know the part number for McCarr?

Thanks Robert
--
Robert "TheFrisco" Schmid
(408) 805-5450

www.facebook.com/TheFlyingFriscos
www.theflyingfriscos.com

Love building planes almost as much as flying. Latest completed build is "Loki", a Chinook Plus 2 bush plane.

Join main@Q-List.groups.io to automatically receive all group messages.