1. Messages
  2. Q2 Elevator Bushing?

Re: Q2 Elevator Bushing?

Troy Zawlacki
 

The bushings that came with the kit were plated steel with a straight knurled shoulder I believe.

Taz

On Oct 22, 2022, at 8:16 PM, Robert Schmid <robert@...> wrote:

Yes that's the number in the plan, need to measure it out but that looks like it would work from ACS, thanks for the link!!!
photo
Robert Schmid
"Age is something that doesn't matter, unless you are a cheese." - Luis Bunuel.


On Sat, Oct 22, 2022 at 10:26 AM David J. Gall <David@...> wrote:

QCSM4? Isn’t that just a standard oilite shoulder bushing? It’s a press fit into a 5/16” hole into a 1/8” thick 2024-T3 Aluminum part (CS-17) and supports the 3/16” (IIRC) QCSM3 headless AN-bolt. Should be a standard FF303-01 oilite bushing from ACS: https://www.aircraftspruce.com/pages/ha/bushings/flangedbushings.php

I hope I’m not wrong….

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Robert Schmid
Sent: Friday, October 21, 2022 12:39 PM
To: main@Q-List.groups.io
Subject: [Q-List] Q2 Elevator Bushing?

 

I posted about this before and Jim jumped to the rescue with a Q200 part but unfortunately it didn't fit.

Anyone has a spare bushing please for the middle elevator hinge on my Q2 GA wing? Or if you know the part number for McCarr?

Thanks Robert
-- 
Robert "TheFrisco" Schmid
(408) 805-5450

www.facebook.com/TheFlyingFriscos
www.theflyingfriscos.com

Love building planes almost as much as flying. Latest completed build is "Loki", a Chinook Plus 2 bush plane.




-- 
Robert "TheFrisco" Schmid
(408) 805-5450

www.facebook.com/TheFlyingFriscos
www.theflyingfriscos.com

Love building planes almost as much as flying. Latest completed build is "Loki", a Chinook Plus 2 bush plane.
Join {main@Q-List.groups.io to automatically receive all group messages.