Re: AV30


Kevin Boddicker
 

I too have one AV30 installed. Talked with the rep at OSH. She said if it precesses more than a few degrees in 15 minutes, a remote is needed.
The reason cited was magnetic interference in the panel. I bought it for the DG! Had a bad DG vacuum driven, and my compass goes crazy 
when I excite the alternator. The crazy part is that I will see 10 to 20 degree swing during flight. When I get on the ground and am taxiing to the hanger,
it will be very close to the setting I used before TO. (the times I have checked)
In my case I believe that in flight I am using the GPS and looking at track. Not magnetic. We automatically correct for wind correction and variation.
Even though variation is 1° or so in this area, so I would consider it non existent. With light and variable winds aloft it seems to do better.

Just my theory. I don’t have a bunch of hours on the unit. So you will need to make your own conclusions.


Kevin Boddicker
TriQ 200 N7868B   593 hrs
Luana, IA.

Less hours than Jim P!!! Congrats Jim.



On Nov 26, 2022, at 9:40 PM, Paul Fisher <rv7a.n18pf@...> wrote:

Interesting.  I just ordered one (Black Friday sale).  I really wanted the artificial horizon function, but I was hoping the DG would work as well.  I guess I'll find out!  Although it may have to wait until it warms up a little - working in a cold hangar is no fun!!

Congratulations on 2000 hours Jim!

Paul 

On Sat, Nov 26, 2022, 20:56 Jim Patillo <Logistics_engineering@...> wrote:
Hi Ben and Keith,
Uavonix does sell a remote magnometer compatible with these units. They’ve added it as an option for $295.00 but you would think that after spending that much for AV30’s their internal magnetometers would work better. You can set them both in DG mode and go fly for 15 minutes and they vary from each other after each and are off course. I’ve tried calibrating them and talking to the factory but that hasn’t helped so far. Everything else works great. 

Jim
N46JP - Q200

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Ben Wilson <4benwilson@...>
Sent: Saturday, November 26, 2022 4:35:31 PM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] AV30
 

Here’s what ACS says:

 

Q: Will this unit work on the AV30 for a DG?

No, this is only used for compatible MGL instruments. The AV-30 is a non-slaved DG, so it does not require a remote magnetometer.”

 

Hmmmm……

 
 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Adam Radloff
Sent: Saturday, November 26, 2022 12:46 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] AV30

 

Jim, forget it without the magnetometer. I own 2 also and have the same complaint, personally I think uAvionix should provide the magnetometer for free for the poor saps like us that bought them. It's false advertising in my opinion. If you research the web and review the AV-30 Facebook group there are many many complaints. 

 

On Sat, Nov 26, 2022, 11:28 AM Jim Patillo <Logistics_engineering@...> wrote:

Good morning all,

I recently installed two Uavonix AV30’s in my plane and removed all the vacuum stuff. That all worked great and I really like not having vacuum. Each unit is a full blown AHARS.   Having said that, the DG unit cannot hold a heading worth a crap and precesses within 10-15 minutes to where it has to be reset with the compass. I’ve tried calibrating it but no joy for better performance. I can buy an external magnometer to solve this but would rather not. My question is, has anyone else seen this problem and how did you solve it. 


BTW, I hope to pass 2000 hours on my plane this year. It’s been a blast. Keep building only if it’s a little every day. There is actually an end believe it or not, and you will be greatly rewarded! 


Jim
N46JP - Q200





Join main@Q-List.groups.io to automatically receive all group messages.