Re: Wingtip Lenses


Bruce Crain
 

What Larry said Jim!!!

Bruce Crain

James
That 215 mph, was it straight and level? Could you confirm it with
something
like GPS? Was it speed through the air? What was your RPM? I saw that
speed
coming back from Ottawa, but it was with a 50 Kt tailwind! If you got
that
speed on engine alone you have one fast bird.
Larry

----- Original Message -----
From: "James Patillo" <patillo@...>
To: <Q-LIST@...>
Sent: Wednesday, October 18, 2000 1:36 AM
Subject: Re: [Q-LIST] Wingtip Lenses


Terry,

Have you got that bird back in the air yet? Tried to call you today
but
got a busy signal at the Rocket Center! Flew my Q to 14,500 AGL today.
Tomorrow I may go til it stops. Where do you think it will be? Saw 215
MPH
for the first time today @ 8,500'. Things are running smooooth now!
The oil
cooler keeps temps @ 190-200F consistently. Ripped out the gascolator
and
tossed it! My required FAA hours will be flown off tomorrow or
Thursday.
Hooray! Hooray!

Regards N46JP
----- Original Message -----
From: terry.l.sickler@...
To: Q-LIST@...
Sent: Tuesday, October 17, 2000 1:54 PM
Subject: RE: [Q-LIST] Wingtip Lenses


Tom, I made wing tips from foam, glassed them, then removed the
foam.
It
isn't all that hard. I also have a Plexiglas form for wing-tip
light
lenses. Check out the QBA site under builder's tips for a
narrative. I
think that I have pictures that I can send to you off-line. ~T~

-----Original Message-----
From: HawkiDoug@... [mailto:HawkiDoug@...]
Sent: Tuesday, October 17, 2000 1:26 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Wingtip Lenses


In a message dated 10/17/00 12:15:41 PM Central Daylight Time,
iveshive@... writes:

<< Any chance of incorporating some sort of winglet or vortex gate
into
the
application?
Tom Ives >>
Only if you do it yourself Tom. These things need molds and the
molds
can
get quite expensive to make. The shape I have is the shape I can
reproduce.

Doug "Hawkeye" Humble
Omaha NE



To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

Quickie Builders Association WEB site
http://web2.airmail.net/qba321tm/q-page1.html




eGroups Sponsor


To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

Quickie Builders Association WEB site
http://web2.airmail.net/qba321tm/q-page1.html










To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

Quickie Builders Association WEB site
http://web2.airmail.net/qba321tm/q-page1.html





-------------------------- eGroups Sponsor

To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

Quickie Builders Association WEB site
http://web2.airmail.net/qba321tm/q-page1.html


________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

Join {main@Q-List.groups.io to automatically receive all group messages.