Sam Hoskins <shoskins@...>
Jim, that sounds like a simple soultion! In fact it sounds too easy, theretoggle quoted messageShow quoted text
must be a drawback somewhere! Any signs of the front bulkhead cutting
through the tube?
----- Original Message -----
From: "James Patillo" <email@example.com>
To: "Q-LIST_1" <Q-LIST@yahoogroups.com>
Sent: Saturday, May 25, 2002 10:56 PM
Subject: Re: [Q-LIST] Spinners
Sam,thickness and diameter) the right size for the front of the hub, measure and
drill prop bolt holes, cut clear tubing and install around the radius. When
the spinner is installed bulkhead should be a snug fit. I have 280 hours on
it and not a sign of a crack. I have a polished aluminum spinner.
4.0" My old prop was a Warnke, with a hub thickness of 3.5". My old
spinner, fit for the Warnke, will not fit the new prop.
The problem being, A/C Spruce does not offer a front bulkhead for 4" hubs.
bulkhead? If so, how did you fabricate it?