Date   

Fw: Q2 kit for sale

Arthur & Margaret <warreen@...>
 

----- Original Message -----
From: Arthur & Margaret
To: Quickie
Sent: Saturday, April 23, 2005 7:04 PM
Subject: Q2 kit for sale


I have a Q2 fast build kit for Sale ( reluctantly) I have a set of digital photos if anyone is interested.
GU canard
Wing
Fuselage 4 parts
Rudder assembly & T tail
wheel pants
Perspex canopy
some metal parts cushion etc
Carbon spars for LS-1
Main under carriage for Tri-Q
LS-1 drawings
Nose leg drawings
Q2 construction plans
Q magazines
$7000 AUD firm, plus transport if applicable
contact details 03 54289202 AH Mobile 0419897721


Picts

Ron <rondefly@...>
 

For those interested I have uploaded 3 new pictures to the Q site photos
under Ron Triano that I took today of My Q on its wheels with the tail cone
on, See you next weekend at laughlin.



Ron T



Ron Triano N4710P
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html


Re: Q-1 gross weight

denpau@...
 

My Onan powered Quickie weighs 350 lbs. (Shame on me, the next one will be
lighter) I have flown at 600lbs.

Dennis


Re: Q-1 gross weight

Dorothea Keats and Chris Walterson <dkeats@...>
 

Stan........ Mine Super Quickie weighs 349 empty and I have flown at
600 gross.---Canada Chris


Brakes (again)

chris rayner <rayners@...>
 

Guys, I know this item was aired a couple of months ago, but I've had problems with my e-mails, so lost the final answer - sorry. I have just renewed all the seals in my Airheart brakes - even before they've been used - because they are 20 years old and I'm cautious. I think I missed an opportunity to change to auto seals, but I didn't and would like to know what is the best performing suitable fluid for the aero seals. I seem to remember DOT 4 auto fluid is OK but not DOT 5?

Thanks

Chris Rayner (Q200 upside down whilst I finish the underside...)


Re: 0-235 install

nmj <njepsen@...>
 

Is there some reason the engine isn't used? Meybe weight. I have 2 aeroplanes with 235 and they (so far) have given 5000hrs of trouble-free flying.
neil
fionapple wrote:


I'm finding Lycoming 235's much more prevalent than Continental
0-200's, and I have a lot of confidence in the 235 L2C I own now.
Does anyone have experience (or plans) for using the 235 on a former
Q200? Is there some reason the engine isn't used? None are listed in
the owner's index, and only owners Kimbull McAndrew and Quentin Durham
are mentioned elsewhere.

The newsletter lists some issues on point; any comments on whether,
say, issue 52 would really be helpful?

Thanks!

http://www.quickiebuilders.org/qtindex.html:
12 10 ENGINE - discussion of flying O-235 in a Q bird (Q-235?)
20 1 ENGINE - 0-235 discussion by Quentin Durham
22 4 BRAKES - Hurst disc sys design by Quentin Durham for his Q235
45 5 PERFORMANCE - Kimbull McAndrew, with performance numbers on his Q-235
52 3 ENGINE - Installing a Lycoming O-235.







Quickie Builders Association WEB site
http://www.quickiebuilders.org




------------------------------------------------------------------------
*Yahoo! Groups Links*

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/
* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...
<mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/>.


Re: Piston ring compressor & Oil pressure 0-200A

Ron <rondefly@...>
 

Mike, thanks for that run through on your engine, I will be mounting mine
after laughlin flyin. Hope I don't have to take it back off and go through
the same thing.



Ron T



Ron Triano N4710P
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

_____

From: Q-LIST@... [mailto:Q-LIST@...] On Behalf Of
Mike Dwyer
Sent: Saturday, April 23, 2005 5:57 PM
To: Q-LIST@...
Subject: [Q-LIST] Piston ring compressor & Oil pressure 0-200A



Hey guys,
I've had my Cont 0-200A engine apart due to the no oil pressure problem
I reported a few weeks ago.
After nearly 1000 hours it is clean inside. I found one spot of surface
rust on the crank near the front bearing. I use Shell 100W and change
at 30 hours so this seems to be working. The bearings look worn but
nothing real bad about them.

I was reading the overhaul manual and it recommends to lap in the oil
pressure regulator. Great idea. Did that yesterday with some
automotive valve laping compound and the seat looks way better. Forget
doing this when the accessory case is on the engine. There is no decent
way to clean out the laping compound. I filled the cavity above the
oil pressure regulator with mineral spirits and it doesn't leak, I
learned this trick from Don George in Orlando who is a great engine guy
if anyone needs work done. I had a exhaust valve leak in one cyl and
called Zephyr Hills Aircraft Engine, they didn't even bother to return
my call. Don George said, "hey bring it over and maybe I can do it
while you wait" which he did. I was most impressed and learned a lot
about cylinders. http://www.dongeorgeaircraft.com/

I measured the crank and found I have a standard crank. That's good as
I could have it turned down 10 thousandths but it looked great so I
didn't do anything to it. After putting in the new $200 bearings and
torquing down the rod bolts I find the rods have less slop than they
did. Hard to explain but the rods shouldn't have much angular play in
relation to the crank. They slide forward and backward ok, but with the
old bearings you could change the angle from the rod to the crank. I
think I have an idea how this came about. I've pulled the cylinders off
several times over the life of the engine and the piston pin is
generally pretty hard to get out. Usually I ended up taping the pin
with a wood dowel and light hammer taps. I think this helped to crush
the soft bearing surfaces due to the side force on the rod bearings. I
think I'll make a piston pin remover for next time.

At Sun N Fun I searched for a piston ring compressor. No one had one.
Couldn't believe it. Figured I'd just borrow one from a friend but I
really wanted my own. Yesterday my friend was test flying a pilotless
drone airplane for Velocity (guess they want a real person to fly off
the 40 hours) and long story ... he was not around for me to beg from.
I thought about using a curved piece of thin aluminum with a 4" hose
clamp. It worked great, better than the professional one I had borrowed
before. So for $1 I got myself a nice ring compressor.

Don George says you gota take the valve bodies out and drain them in
order to check the valve clearances. He also says that 30-110 tho is
the limit and if you go over 110 then the exhaust valve tends to burn
like mine did. I drained my lifter bodies so we'll see how this works.

The engine is going back together but I'm leaving off the vacume pump
drive on the lower front of the engine. I threw it up in the air and it
came down hard which tells me that it is heavy and not used so by by. I
read that the gears fling oil out the breather also and a Erocoup
builder group recommends removing it. Hey, that's a factory plane, how
can they do that!

I still plan to make the breather tube extender mod to reduce blown out
oil. Also have some 431 Stainless tube and 437 filler rod to make me
some nice 4 into 4 exhaust pipes. My factory supplied steel 4:1 exhaust
is looking pretty ragged and I hate having to take the whole thing off
each time I work on a cylinder...

Still got a couple of weeks of work before flying... But the weather
here in FL kinds of stinks right now anyway. Sun N Fun weekend was
beautiful except for the generally 15K direct crosswind on the landing
runway. One note about Sun N Fun. They are now charging $30 a head or
$25 if EAA. 10 years ago it was $15 and your wife got in for free.
They now have 1/2 the number of Experimentals and Antiques fling in. I
think it sucks that they charge people that drive in the same price as
the people that show their planes. Each year they raise the price on
the commercial vendors but have less traffic. I 'd like to know where
the money goes cause they aren't spending it on cleaning the porta
potties!

Mike Q200 N3QP - Status - in pieces










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...
<mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.


Re: N275CH Piston question

Jim Patillo
 

Kevin,

My experience is when you install high compression pistons you will
need an oil cooler because of the added heat.

Jim Patillo Q200 N46JP


3. I knew Charlie was anticipating putting an oil cooler on the
airplane before he became ill. To me this indicates that he was
fighting heat after rebuilding his engine with these pistons.

4. I don't need the additional performance, I want reliability.

Kevin


Piston ring compressor & Oil pressure 0-200A

Mike Dwyer <mdwyer@...>
 

Hey guys,
I've had my Cont 0-200A engine apart due to the no oil pressure problem I reported a few weeks ago.
After nearly 1000 hours it is clean inside. I found one spot of surface rust on the crank near the front bearing. I use Shell 100W and change at 30 hours so this seems to be working. The bearings look worn but nothing real bad about them.

I was reading the overhaul manual and it recommends to lap in the oil pressure regulator. Great idea. Did that yesterday with some automotive valve laping compound and the seat looks way better. Forget doing this when the accessory case is on the engine. There is no decent way to clean out the laping compound. I filled the cavity above the oil pressure regulator with mineral spirits and it doesn't leak, I learned this trick from Don George in Orlando who is a great engine guy if anyone needs work done. I had a exhaust valve leak in one cyl and called Zephyr Hills Aircraft Engine, they didn't even bother to return my call. Don George said, "hey bring it over and maybe I can do it while you wait" which he did. I was most impressed and learned a lot about cylinders. http://www.dongeorgeaircraft.com/

I measured the crank and found I have a standard crank. That's good as I could have it turned down 10 thousandths but it looked great so I didn't do anything to it. After putting in the new $200 bearings and torquing down the rod bolts I find the rods have less slop than they did. Hard to explain but the rods shouldn't have much angular play in relation to the crank. They slide forward and backward ok, but with the old bearings you could change the angle from the rod to the crank. I think I have an idea how this came about. I've pulled the cylinders off several times over the life of the engine and the piston pin is generally pretty hard to get out. Usually I ended up taping the pin with a wood dowel and light hammer taps. I think this helped to crush the soft bearing surfaces due to the side force on the rod bearings. I think I'll make a piston pin remover for next time.

At Sun N Fun I searched for a piston ring compressor. No one had one. Couldn't believe it. Figured I'd just borrow one from a friend but I really wanted my own. Yesterday my friend was test flying a pilotless drone airplane for Velocity (guess they want a real person to fly off the 40 hours) and long story ... he was not around for me to beg from. I thought about using a curved piece of thin aluminum with a 4" hose clamp. It worked great, better than the professional one I had borrowed before. So for $1 I got myself a nice ring compressor.

Don George says you gota take the valve bodies out and drain them in order to check the valve clearances. He also says that 30-110 tho is the limit and if you go over 110 then the exhaust valve tends to burn like mine did. I drained my lifter bodies so we'll see how this works.

The engine is going back together but I'm leaving off the vacume pump drive on the lower front of the engine. I threw it up in the air and it came down hard which tells me that it is heavy and not used so by by. I read that the gears fling oil out the breather also and a Erocoup builder group recommends removing it. Hey, that's a factory plane, how can they do that!

I still plan to make the breather tube extender mod to reduce blown out oil. Also have some 431 Stainless tube and 437 filler rod to make me some nice 4 into 4 exhaust pipes. My factory supplied steel 4:1 exhaust is looking pretty ragged and I hate having to take the whole thing off each time I work on a cylinder...

Still got a couple of weeks of work before flying... But the weather here in FL kinds of stinks right now anyway. Sun N Fun weekend was beautiful except for the generally 15K direct crosswind on the landing runway. One note about Sun N Fun. They are now charging $30 a head or $25 if EAA. 10 years ago it was $15 and your wife got in for free. They now have 1/2 the number of Experimentals and Antiques fling in. I think it sucks that they charge people that drive in the same price as the people that show their planes. Each year they raise the price on the commercial vendors but have less traffic. I 'd like to know where the money goes cause they aren't spending it on cleaning the porta potties!

Mike Q200 N3QP - Status - in pieces


N275CH Piston question

Kevin Fortin <kfortin@...>
 

Guys,



Charlie Harris had installed what Terry Sickler thinks is Venolia racing
pistons in N275CH.



I am in the process of taking those out and replacing them with either
"standard" pistons or am looking for another well proven piston that is not
as high compression as the Venolia. Does anyone have any suggestions.



In case you are curious my reasoning here is:



1. Cylinder #1 was right on the bottom edge of limit when compression
tested for the airplane's annual.

2. Terry Sickler said he had burned up either 2 or 3 of these pistons.
( I can't quite remember the number he told me).

3. I knew Charlie was anticipating putting an oil cooler on the
airplane before he became ill. To me this indicates that he was fighting
heat after rebuilding his engine with these pistons.

4. I don't need the additional performance, I want reliability.



Also, does anyone know how to remove the Venolia piston wrist pin retaining
ring? Other than using a Dremel and a cutoff wheel I can't imagine a way.



As always, Thanks in advance,



Kevin


To Brad Olsen RE: Fuel pump pictures

Kevin Fortin <kfortin@...>
 

Brad,

If the pictures of your fuel pump, etc. are not too much trouble I would
really appreciate them.

Kevin


Lynn,

Right you are - Tom installed a header fuel pump and check valve
combination in 1TM. As told to me (and Tom, jump in when you read
this), there was a concern about certain engine operations (possible
vapor lock) and a more than one item was accomplished about the same
time. One mod was the header pump which results in a bypass line
containing the pump and the normal gravity line. I use the pump on
every takeoff and until I level out at cruise altitude. I have also
left it on for entire flights to see that it doesn't affect the
carburetor. My mental checklist for any engine hickup includes: carb
heat, header pump on.

I am going to take photos tomorrow and send them to Kevin.

Brad Olson
N321TM, Livermore

--- In Q-LIST@..., "French" <LJFrench@F...> wrote:
I don't know if Brad (or Tom Moore) will speak to this or not, but
several
years ago we talked about a boost pump/check valve system that I was
going
to use and I thought was going to be implemented on 1TM. I decided
to forgo
this solution since I felt it was more of a band aid. I tried to
spend my
time working on what I thought was the root cause - the vent system.
I think I still have the part numbers of the components we planed to
used
for the system, but it would be better for the other guys to speak
who
actually have extensive runtime hours on a fuel boost/check valve
system and
who have tested it in all flight attitudes with the boost pump shut
off to
verify it's safety in the event of a boost pump failure. The check
valve I
had spec'd had a very near 0 cracking pressure. I can look it up if
interested.

Lynn French
N142LF


Since I can't find the source of the problem, my instincts tell me
to put
in
a fuel pump to get a bit more margin. If anyone that has a fuel
pump and
bypass on their airplane, and they wouldn't mind me giving them a
call,
would you please email me you phone number and I will give you a
call on
my
dime. I would like to discuss the components you used.
Thank you in advance,

Kevin Fortin

303-375-0350





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Re: N275CH Fuel pump and bypass

Paul Buckley
 

Sorry Lynn........have just found your comments about your fuel system in a post to the list last January.
You don't have to go through it again!

Paul B.

----- Original Message -----
From: Paul Buckley
To: Q-LIST@...
Sent: Saturday, April 23, 2005 2:53 PM
Subject: Re: [Q-LIST] N275CH Fuel pump and bypass


Hi Lynn

You say that you spent time working on the vent system.
Have you done anything differently to what it says in the Q-200 plans?
Have you had any problems?

Regards,
Paul Buckley
TriQ-200.......still building in Cheshire, England.
----- Original Message -----
From: French
To: Q-LIST@...
Sent: Friday, April 22, 2005 11:19 PM
Subject: Re: [Q-LIST] N275CH Fuel pump and bypass


I don't know if Brad (or Tom Moore) will speak to this or not, but several
years ago we talked about a boost pump/check valve system that I was going
to use and I thought was going to be implemented on 1TM. I decided to forgo
this solution since I felt it was more of a band aid. I tried to spend my
time working on what I thought was the root cause - the vent system.
I think I still have the part numbers of the components we planed to used
for the system, but it would be better for the other guys to speak who
actually have extensive runtime hours on a fuel boost/check valve system and
who have tested it in all flight attitudes with the boost pump shut off to
verify it's safety in the event of a boost pump failure. The check valve I
had spec'd had a very near 0 cracking pressure. I can look it up if
interested.

Lynn French
N142LF


> Since I can't find the source of the problem, my instincts tell me to put
> in
> a fuel pump to get a bit more margin. If anyone that has a fuel pump and
> bypass on their airplane, and they wouldn't mind me giving them a call,
> would you please email me you phone number and I will give you a call on
> my
> dime. I would like to discuss the components you used.

> Thank you in advance,

>
> Kevin Fortin
>
> 303-375-0350



Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 21/04/2005

----------

No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 21/04/2005






Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 21/04/2005

----------

No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 21/04/2005


Re: Q-1 gross weight

Tri-Q1 <rryan@...>
 

Stan,

My gross is 725 # .

Ryan
Tri-Q1 N2XV


--- In Q-LIST@..., Stan Susman <stanpfa@p...> wrote:
Can anyone say at what weights the Q-1 have been flown at. I have the
POH but I'm looking for some UN-official , empirical data.
Thanks, Stan




Re: N275CH Fuel pump and bypass

Paul Buckley
 

Hi Lynn

You say that you spent time working on the vent system.
Have you done anything differently to what it says in the Q-200 plans?
Have you had any problems?

Regards,
Paul Buckley
TriQ-200.......still building in Cheshire, England.

----- Original Message -----
From: French
To: Q-LIST@...
Sent: Friday, April 22, 2005 11:19 PM
Subject: Re: [Q-LIST] N275CH Fuel pump and bypass


I don't know if Brad (or Tom Moore) will speak to this or not, but several
years ago we talked about a boost pump/check valve system that I was going
to use and I thought was going to be implemented on 1TM. I decided to forgo
this solution since I felt it was more of a band aid. I tried to spend my
time working on what I thought was the root cause - the vent system.
I think I still have the part numbers of the components we planed to used
for the system, but it would be better for the other guys to speak who
actually have extensive runtime hours on a fuel boost/check valve system and
who have tested it in all flight attitudes with the boost pump shut off to
verify it's safety in the event of a boost pump failure. The check valve I
had spec'd had a very near 0 cracking pressure. I can look it up if
interested.

Lynn French
N142LF


> Since I can't find the source of the problem, my instincts tell me to put
> in
> a fuel pump to get a bit more margin. If anyone that has a fuel pump and
> bypass on their airplane, and they wouldn't mind me giving them a call,
> would you please email me you phone number and I will give you a call on
> my
> dime. I would like to discuss the components you used.

> Thank you in advance,

>
> Kevin Fortin
>
> 303-375-0350



Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 21/04/2005

----------

No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 21/04/2005


Re: Wheel Pants

shoskins@...
 

Is is faster? That's the $64,000 question. My pant mods were a lot of work
and I am half bald srom all the head scratching as I tried to figger things out.

Is it faster? The answer is Yes - I think so. I have only had a couple of
flights.

First off, Before I did the mod I did not do an extensire test regieme to
determine the "before" data. Sure, I know I cruise with an indicated 145-145
kts, but to compare apples-to-apples one should be a test pilot and gather good
numbers. You should fly at a certail altitude with the altimiter set at
29.92. Carefully set the tach to a given value, be very careful that the
aircraft is not in the slightest ascent or decent.

These methods are well spelled out in Kent Paser's book, "Economy with Speed".

I only gathered rudimentary data.

I have made a couple of short hops and a 350 mile cross country. To me, the
plane feels faster. I was hoping for four or five knots and maybe that's what
I got. I need to do some flying to see.

I also changed the brake mount system from the LaRue mod to a better one. The
new brakes are better. And I realigned the left axle (Ala Gall) so it's
tracking better.

Finally, I have not yet painted it. I intend to get my ring inlets installed
before this year's AirVenture Cup race, but my dad is real sick and I'm not
getting the time in on it.

Mark, come to the Tandem Wing Spring Fling and see them for your self!

Sam
www.samhoskins.blogspot.com


Q2 kit for sale

Arthur & Margaret <warreen@...>
 

I have a Q2 fast build kit for Sale ( reluctantly) I have a set of digital photos if anyone is interested.
GU canard
Wing
Fuselage 4 parts
Rudder assembly & T tail
wheel pants
Perspex canopy
some metal parts cushion etc
Carbon spars for LS-1
Main under carriage for Tri-Q
LS-1 drawings
Nose leg drawings
Q2 construction plans
Q magazines
$7000 AUD firm, plus transport if applicable
contact details 03 54289202 AH Mobile 0419897721


Q-1 gross weight

Stan Susman <stanpfa@...>
 

Can anyone say at what weights the Q-1 have been flown at. I have the POH but I'm looking for some UN-official , empirical data.
Thanks, Stan


Re: Wheel Pants

Mark/Pat Pearson/Pound <wlkabout@...>
 

Sam:
The new and improved wheelpants; are they strictly empirical or did
you have some theoretical design work too? I have found (what I hope
will be) vastly superior brakes for my Q1 which will require widening
the wheel pant about 1 inch. As I have to make that change I'm thinking
that recarving to approximate the Sammy Supper Slippery Shroud (there is
a distinct lack of synonyms starting with "S" for the word wheelpant)
might make sense, but if I have to do tuft tests to determine what needs
to change I don't see it happening.

Mark

Mark King wrote:

Sam,
I was wondering if you have noticed any improvements
to your Q since you have added your new wheel pants. I
am considering the modification if the bennifits
out-weigh the costs of doing it.

Please let me know.
Thanks,

Mark King
Q200
Hooper, UT

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com


Quickie Builders Association WEB site
http://www.quickiebuilders.org




---------------------------------------------------------------
Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


Re: N275CH Fuel pump and bypass

Brad Olson <n1tm@...>
 

Lynn,

Right you are - Tom installed a header fuel pump and check valve
combination in 1TM. As told to me (and Tom, jump in when you read
this), there was a concern about certain engine operations (possible
vapor lock) and a more than one item was accomplished about the same
time. One mod was the header pump which results in a bypass line
containing the pump and the normal gravity line. I use the pump on
every takeoff and until I level out at cruise altitude. I have also
left it on for entire flights to see that it doesn't affect the
carburetor. My mental checklist for any engine hickup includes: carb
heat, header pump on.

I am going to take photos tomorrow and send them to Kevin.

Brad Olson
N321TM, Livermore

--- In Q-LIST@..., "French" <LJFrench@F...> wrote:
I don't know if Brad (or Tom Moore) will speak to this or not, but
several
years ago we talked about a boost pump/check valve system that I was
going
to use and I thought was going to be implemented on 1TM. I decided
to forgo
this solution since I felt it was more of a band aid. I tried to
spend my
time working on what I thought was the root cause - the vent system.
I think I still have the part numbers of the components we planed to
used
for the system, but it would be better for the other guys to speak
who
actually have extensive runtime hours on a fuel boost/check valve
system and
who have tested it in all flight attitudes with the boost pump shut
off to
verify it's safety in the event of a boost pump failure. The check
valve I
had spec'd had a very near 0 cracking pressure. I can look it up if
interested.

Lynn French
N142LF


Since I can't find the source of the problem, my instincts tell me
to put
in
a fuel pump to get a bit more margin. If anyone that has a fuel
pump and
bypass on their airplane, and they wouldn't mind me giving them a
call,
would you please email me you phone number and I will give you a
call on
my
dime. I would like to discuss the components you used.
Thank you in advance,

Kevin Fortin

303-375-0350


Wheel Pants

Mark King
 

Sam,
I was wondering if you have noticed any improvements
to your Q since you have added your new wheel pants. I
am considering the modification if the bennifits
out-weigh the costs of doing it.

Please let me know.
Thanks,

Mark King
Q200
Hooper, UT

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com