|
Re: [Dragonflylist] Laughlin
Patrick Panzera <panzera@...>
I flew into Jean a couple of years ago and I think it would be ideal. ThereI'm liking it. http://maps.google.com/maps?q=jean+nv&ll=35.773373,-115.326490&spn=0.027122,0.04 2400&t=k&hl=en Left click (and hold) on the image and move your mouse to scroll around. Pat
|
|
|
|
Re: q-200 building info. needed
Dorothea Keats and Chris Walterson <dkeats@...>
Brad------------ I have a complete Q-200 kit that has never been
started. It has all that's needed to build except the engine ,epoxi and wheels. I am located in Geraldton Ontario Canada. I want 8,000 Canadian. This kit was worth 13,000 US in 1984. It comes with the carbon fiber spars. I was gonna run a 2.5 turbocharged Subaru, but I have way to may other project on the go. With the cost of the Subaru I figure I could have a finished 200mph airplane for less than 20,000 Canadian. If you're intersted give me a buzz. If you are not intersted and are looking at a partially built aircraft, be very carefull. You never know what you are getting. I have built and am flying a Super Quickie and a Turbocharges Subaru Dragonlfy. Too may toys and no time.------------ Canada Chris
|
|
|
|
Re: Exhaust System.
--- In Q-LIST@..., Neil Jepsen <njepsen@i...> wrote:
Jim why did you do it twice? Did the first one fail or did youwant a change of colour?Behalf withOf Jim anda process called Jet Hot. They wire clean the inside and outside airplanes.coat both sides. They mainly do racing headers but will do My 4:1 cost $75.00 for the full monty. I've done mine twice. It
|
|
|
|
Re: Exhaust System Reduex
Neil,
My 4:1 is steel. I did some welding on it and had the whole thing recoated black this time. The coatings hold up well with no rust. Jim P. P.S. Ron I will try to find the supplier but have to go to my hangar to get the address. Its between Redwood City and San Carlos at the 101 Freeway. Jim Patillo --- In Q-LIST@..., Neil Jepsen <njepsen@i...> wrote: Jim why did you do it twice? Did the first one fail or did youwant a change of colour?Behalf withOf Jim anda process called Jet Hot. They wire clean the inside and outside airplanes.coat both sides. They mainly do racing headers but will do theMy 4:1 cost $75.00 for the full monty. I've done mine twice. It systemexterior?Behalf Of Itand ...you were right, it is next to impossible to bend that stuff. Eachappearsonly the mandrel bend machines can touch it. thepipeplacewill exit at the bottom near the oil sump. I checked out thisthat ceramic coats the pipes, $20 per foot. They say it keeps -------heatwaste ofin the pipes better. Does anyone here believe that or is it aofmoney? subject=Unsubscribe>*Yahoo! Groups Links* * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
|
|
|
|
Re: Exhaust System.
As I recall the white coating is 1300 degrees and the black
andaluminum is 2400 degrees. Jim P --- In Q-LIST@..., "Dave" <dave@h...> wrote: Thanks! I had heard between $175 and $225 for the Revmaster pipes.the 1300 or 2400 degree stuff?when I hadI recall,was for theBehalf Of DaveBehalf Of rondefly@r...Behalf Of Greg & Debbie MerrillBehalf Of Jerry Marstallhelp with heat reduction in the cowling, you don't have rusty pipes.and ... pipeyou were right, it is next to impossible to bend that stuff. Itappearsonly the mandrel bend machines can touch it. placewill exit at the bottom near the oil sump. I checked out this the heatthat ceramic coats the pipes, $20 per foot. They say it keeps waste ofin the pipes better. Does anyone here believe that or is it a ofmoney? Service <http://docs.yahoo.com/info/terms/> .
|
|
|
|
Re: Exhaust System.
Neil Jepsen <njepsen@...>
Jim why did you do it twice? Did the first one fail or did you want a change of colour?
toggle quoted messageShow quoted text
neil rondefly@... wrote:
Thanks Jim, Ill check it out.
|
|
|
|
Re: Exhaust System.
rondefly@...
Jim, do you remember the name of the place in Redwood City? I could not find
toggle quoted messageShow quoted text
it on the web. Ron T Ron & Carolyn Triano Q-200 N4710P
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Dave Sent: Tuesday, May 03, 2005 1:49 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Thanks! I had heard between $175 and $225 for the Revmaster pipes. Jim got a good deal for only $75. Jim, Do you recall if you got the 1300 or 2400 degree stuff? Dave -----Original Message----- From: Greg & Debbie Merrill [mailto:q2pilot@...] Sent: Tuesday, May 03, 2005 4:14 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Dave Don't recall the temperature rating as it was almost 7 years ago when I had my pipes done. The finish is the standard silver(ish) color and as I recall, the cost was around $175. They do nice work! Almost forgot, this was for the Revmaster 2100D 4 into 1 exhaust system. Greg -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Dave Sent: May 3, 2005 1:18 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Hi Greg, Did you use the 1300 degree or the 2400 degree stuff? Do you recall what you paid for them to do yours? (Q2 or Q200)? Thanks, Dave Richardson -----Original Message----- From: Greg & Debbie Merrill [mailto:q2pilot@...] Sent: Tuesday, May 03, 2005 1:10 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. This is the place I used and they do nice work! http://www.jet-hot.com/ <http://www.jet-hot.com/> Greg -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of rondefly@... Sent: May 3, 2005 8:49 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Is this Ceramic coat a dipping process or did you just spray the exterior? Ron & Carolyn Triano Q-200 N4710P -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers.appears only the mandrel bend machines can touch it. Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ <http://groups.yahoo.com/group/Q-LIST/> * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service < http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > . Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ <http://groups.yahoo.com/group/Q-LIST/> * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.
|
|
|
|
Re: Exhaust System.
Dave <dave@...>
Thanks! I had heard between $175 and $225 for the Revmaster pipes.
toggle quoted messageShow quoted text
Jim got a good deal for only $75. Jim, Do you recall if you got the 1300 or 2400 degree stuff? Dave
-----Original Message-----
From: Greg & Debbie Merrill [mailto:q2pilot@...] Sent: Tuesday, May 03, 2005 4:14 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Dave Don't recall the temperature rating as it was almost 7 years ago when I had my pipes done. The finish is the standard silver(ish) color and as I recall, the cost was around $175. They do nice work! Almost forgot, this was for the Revmaster 2100D 4 into 1 exhaust system. Greg -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Dave Sent: May 3, 2005 1:18 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Hi Greg, Did you use the 1300 degree or the 2400 degree stuff? Do you recall what you paid for them to do yours? (Q2 or Q200)? Thanks, Dave Richardson -----Original Message----- From: Greg & Debbie Merrill [mailto:q2pilot@...] Sent: Tuesday, May 03, 2005 1:10 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. This is the place I used and they do nice work! http://www.jet-hot.com/ Greg -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of rondefly@... Sent: May 3, 2005 8:49 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Is this Ceramic coat a dipping process or did you just spray the exterior? Ron & Carolyn Triano Q-200 N4710P -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers.appears only the mandrel bend machines can touch it. Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . [Non-text portions of this message have been removed] Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links
|
|
|
|
Re: Exhaust System.
Greg & Debbie Merrill
Dave
toggle quoted messageShow quoted text
Don't recall the temperature rating as it was almost 7 years ago when I had my pipes done. The finish is the standard silver(ish) color and as I recall, the cost was around $175. They do nice work! Almost forgot, this was for the Revmaster 2100D 4 into 1 exhaust system. Greg
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Dave Sent: May 3, 2005 1:18 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Hi Greg, Did you use the 1300 degree or the 2400 degree stuff? Do you recall what you paid for them to do yours? (Q2 or Q200)? Thanks, Dave Richardson -----Original Message----- From: Greg & Debbie Merrill [mailto:q2pilot@...] Sent: Tuesday, May 03, 2005 1:10 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. This is the place I used and they do nice work! http://www.jet-hot.com/ Greg -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of rondefly@... Sent: May 3, 2005 8:49 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Is this Ceramic coat a dipping process or did you just spray the exterior? Ron & Carolyn Triano Q-200 N4710P -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers.appears only the mandrel bend machines can touch it. Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links
|
|
|
|
Re: Exhaust System.
Dave <dave@...>
Hi Greg,
toggle quoted messageShow quoted text
Did you use the 1300 degree or the 2400 degree stuff? Do you recall what you paid for them to do yours? (Q2 or Q200)? Thanks, Dave Richardson
-----Original Message-----
From: Greg & Debbie Merrill [mailto:q2pilot@...] Sent: Tuesday, May 03, 2005 1:10 PM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. This is the place I used and they do nice work! http://www.jet-hot.com/ Greg -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of rondefly@... Sent: May 3, 2005 8:49 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Is this Ceramic coat a dipping process or did you just spray the exterior? Ron & Carolyn Triano Q-200 N4710P -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers.appears only the mandrel bend machines can touch it. Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links
|
|
|
|
Re: Exhaust System.
Greg & Debbie Merrill
toggle quoted messageShow quoted text
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of rondefly@... Sent: May 3, 2005 8:49 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Is this Ceramic coat a dipping process or did you just spray the exterior? Ron & Carolyn Triano Q-200 N4710P -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers. Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links
|
|
|
|
Re: Exhaust System.
rondefly@...
Thanks Jim, I’ll check it out.
toggle quoted messageShow quoted text
Ron T Ron & Carolyn Triano Q-200 N4710P
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jim Patillo Sent: Tuesday, May 03, 2005 7:32 AM To: Q-LIST@... Subject: [Q-LIST] Re: Exhaust System. Ron, There's a place in Redwood City that ceramic coats exhaust pipes with a process called Jet Hot. They wire clean the inside and outside and coat both sides. They mainly do racing headers but will do airplanes. My 4:1 cost $75.00 for the full monty. I've done mine twice. It works very well. Colors are white, black and aluminum. Jim P. --- In Q-LIST@..., <rondefly@r...> wrote: Is this Ceramic coat a dipping process or did you just spray theexterior? Behalf Of Greg & Debbie MerrillBehalf Of Jerry Marstallhelp with heat reduction in the cowling, you don't have rusty pipes.and ... appearsyou were right, it is next to impossible to bend that stuff. It pipeonly the mandrel bend machines can touch it. placewill exit at the bottom near the oil sump. I checked out this heatthat ceramic coats the pipes, $20 per foot. They say it keeps the waste ofin the pipes better. Does anyone here believe that or is it a ofmoney? Service < http://docs.yahoo.com/info/terms/> . Quickie Builders Association WEB site http://www.quickiebuilders.org _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
|
|
|
|
Re: Exhaust System.
Ron,
There's a place in Redwood City that ceramic coats exhaust pipes with a process called Jet Hot. They wire clean the inside and outside and coat both sides. They mainly do racing headers but will do airplanes. My 4:1 cost $75.00 for the full monty. I've done mine twice. It works very well. Colors are white, black and aluminum. Jim P. --- In Q-LIST@..., <rondefly@r...> wrote: Is this Ceramic coat a dipping process or did you just spray theexterior? Behalf Of Greg & Debbie MerrillBehalf Of Jerry Marstallhelp with heat reduction in the cowling, you don't have rusty pipes.and ... appearsyou were right, it is next to impossible to bend that stuff. It pipeonly the mandrel bend machines can touch it. placewill exit at the bottom near the oil sump. I checked out this heatthat ceramic coats the pipes, $20 per foot. They say it keeps the waste ofin the pipes better. Does anyone here believe that or is it a ofmoney? Service <http://docs.yahoo.com/info/terms/> .
|
|
|
|
Exhaust System/Revmaster
joseph.m.tygart.alion@...
ALCON - This sure sounds like something I need for my hot running turbo
toggle quoted messageShow quoted text
Revmaster! Where can you have this ceramic coating done? Muffler shops, dealerships??? Speaking of warm Revmasters: I've almost got 762CP back in the air pending resolution of engine idle problems, i.e. the engine idles perfectly @ 750 RPM, set by idle arm & control linkage. Upon reinstalling the engine cowling and allowing the engine to warm up for a few minutes the RPM will automatically increase to an average of 1450 RPM and remain until shutdown and cooling. Makes for a real hot final! Sure would like to make it to the Spring Fling. Is anyone familiar with this scenario? Comments & suggestions please. Thanks, Joe Tygart Turbo-Q N762CP VA.
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...] On Behalf Of rondefly@... Sent: Tuesday, May 03, 2005 8:49 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Is this Ceramic coat a dipping process or did you just spray the exterior? Ron & Carolyn Triano Q-200 N4710P -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers. Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ <http://groups.yahoo.com/group/Q-LIST/> * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > . Quickie Builders Association WEB site http://www.quickiebuilders.org <http://www.quickiebuilders.org> _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ <http://groups.yahoo.com/group/Q-LIST/> * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of <http://docs.yahoo.com/info/terms/> Service.
|
|
|
|
Re: Tandem Wing Spring Fling approaching
swensgoldflyer <swensgoldflyer@...>
Anyone in the Minneapolis area going to the spring Fling who would
like to share driving and lodging give me a call asap and let's try to get together. Jon Swenson TriQvair2 (Rebuilding) cell 612 743 4895 home 763 377 0373 --- In Q-LIST@..., "Sam Hoskins" <shoskins@m...> wrot> Hi All, Fling, being held in sunny southern Illinois.Professor Charley Rodriguez as he explains the inner workings of the SlickMagnetos and the MA#-SPA carburetors.pants and will cover the new, radical method of filling pinholes andscratches with pure epoxy. I will also have the engine cowling off and willexplain how why I don't need an oil cooler with a hopped up engine.the details. http://home.mchsi.com/~shoskins/springfling.html
|
|
|
|
Re: [Dragonflylist] Laughlin
rondefly@...
If there are enough that are into Minden, NV sometime after Livermore I will
toggle quoted messageShow quoted text
try and gather some information, for starters here is the airport info. http://www.fltplan.com/AirportInformation/KMEV.htm There would be plenty of parking right by my hangar A6. I have never put together something like this and can help all I can. I work out of town and am home at South Lake Tahoe each weekend. At least we would have shelter and not have to get a tent. Ron T Ron & Carolyn Triano Q-200 N4710P
-----Original Message-----
From: Dragonflylist@... [mailto:Dragonflylist@...]On Behalf Of terrywadams@... Sent: Monday, May 02, 2005 5:31 PM To: Dragonflylist@... Subject: Re: [Dragonflylist] Laughlin I would be up for Minden NV sometime after Livermore. Terry Adams N41521 DF MkI Stockton ----- Original Message ----- From: Patrick Panzera To: Dragonflylist@... Cc: 'Q-LIST@yahoogroups. com (E-mail)' ; 'John P Moyle' Sent: Monday, May 02, 2005 1:13 PM Subject: RE: [Dragonflylist] Laughlin > Pat, I really want to thank you for all the presentations and the whole > program you conducted at Laughlin. My pleasure. > I was especially impressed with Paul and his prop presentation. Yeah, he's an awesome guy. > I really don't want you to have to go through the > expense of a tent next time, I brought it up at the dinner but it didn't get > anywhere. I agree. I took it in the shorts but felt that it needed to be done. Usually the FBO comes up with a hangar for us, and there are no costs involved. This year was a little different, as there were just no hangars available. No fault of the FBO, it was just that the airport is under construction... destruction if you prefer. Next year SHOULD be business as usual, with no out of pocket expenses, as we will probably continue to use Don Laughlin's hangar or the FBO hangar. But I did like the feel of the tent.. the acoustics were awesome; everyone could hear well and although the wind did get to be problematic, earlier in the day the nice cool breeze was refreshing, way better than a stuffy, hot hangar. We didn't know for sure if we'd have a hangar this year or not, until the very last minute, and I just couldn't see all of us standing outside in the sun all day long. To me, the tent was just the right thing to do. Other options included just canceling and I certainly didn't want to do that. > There must be something else that can be done or maybe we should > think of another airport. Possibly by next year there may be some hangars > available. Or there are plenty of available Gambling towns that are around > with no tower operation and large runways I know at Minden NV where I am > hangared it has a 7500' runway, no tower, and you can gamble right at the > airport. My hangar would be available with plenty of space. Why don't we consider this after Livermore? Maybe rather than replacing Laughlin, we can add it to the list of annual gatherings? It's how Livermore started. Thanks! Pat ---------------------------------------------------------------------------- -- Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/Dragonflylist/ b.. To unsubscribe from this group, send an email to: Dragonflylist-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Dragonflylist/ * To unsubscribe from this group, send an email to: Dragonflylist-unsubscribe@... <mailto:Dragonflylist-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
|
|
|
|
Re: Exhaust System.
rondefly@...
Is this Ceramic coat a dipping process or did you just spray the exterior?
toggle quoted messageShow quoted text
Ron & Carolyn Triano Q-200 N4710P
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Greg & Debbie Merrill Sent: Tuesday, May 03, 2005 5:01 AM To: Q-LIST@... Subject: RE: [Q-LIST] Exhaust System. Ditto! -----Original Message----- From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers. Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links Quickie Builders Association WEB site http://www.quickiebuilders.org _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Q-LIST/ * To unsubscribe from this group, send an email to: Q-LIST-unsubscribe@... <mailto:Q-LIST-unsubscribe@...?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
|
|
|
|
Re: Exhaust System.
Greg & Debbie Merrill
Ditto!
toggle quoted messageShow quoted text
-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...]On Behalf Of Jerry Marstall Sent: May 2, 2005 8:00 PM To: Q-LIST@... Subject: Re: [Q-LIST] Exhaust System. I had it done for the 4 into 1 on my Revmaster. Not only did it help with heat reduction in the cowling, you don't have rusty pipes. Jerry Mike Dwyer wrote: Hey Qers. Quickie Builders Association WEB site http://www.quickiebuilders.org Yahoo! Groups Links
|
|
|
|
Re: Marvel Schebler Carb
swensgoldflyer <swensgoldflyer@...>
--- In Q-LIST@..., "Sam Hoskins" <shoskins@m...> wrote:
Thanks, The dash # is 10/2430/p3 serial # 3921596. I appreciate your help Jon Swenson Regarding the MA3-PAA carb.
|
|
|
|
Marvel Schebler Carb
Sam Hoskins <shoskins@...>
Regarding the MA3-PAA carb.
We're looking it up. Do you have the dash 10 (10-XXXXXX) number off the data plate? Sam
|
|
|