Date   

Open House

damiantwinsport@...
 

This free open house might be benificial to some of you guys.
Regards,
Damian Gregory N8427 Q 200

-----Original Message-----
From: Price, Terry L. <tprice@...>
To: Damian Gregory <damiantwinsport@...>
Sent: Tue, 10 May 2005 14:42:55 -0700
Subject: Open House


Damian,

Thought you might be able to share this with others.

--Terry


Re: Quickies and Dragonflys "long post"

JohntenHave <Jtenhave@...>
 

Jim,

reread my post. Unbridled enthusiasm is one thing, a viable path for
a beginner to enable construction and completion is quite another.
Brad was not asking how great Q 200s are but rather announcing his
intention to start building one.

You and I are doing him a disservice if we do not advise him of the
cold hard facts before he commits to a path which could just as well
result in a dead end. Building a "straight-forward", supported
project is hard enough that only one in ten are finished by the
orginator.

Q-200s are OK, I have flown in one but it did not take 600hrs to
decide that there are better aircraft (in my view) with respect to
visibility on approach, engineering, cockpit space, comfort, luggage
space and load carrying capacity whilst remaining within the
published weight limits. It depends what you want or what
compromises you deem reasonable.

There is one thing for sure, there is more than one answer to the
question "what can I build that will meet my flying needs?" If Brad
does the analysis and decides with all the facts that the Q200 is the
one for him, great. I am sure we will all do our best to support him.

Looking at the latest breed of Ultralights I suspect we run the risk
of morphing into a bunch of aging vintage aircraft enthusiasts....
best we do not look too closely ;-)

Regards

John







--- In Q-LIST@..., "Jim Patillo"
<logistics_engineering@m...> wrote:

Brad,

While John Tenhave is correct in stating the decision you make now
can take several years to build, there's nothing faster or more fun
for the money than a Q200, which I doubt John has ever riden in.
snip


Re: Quickies and Dragonflys "long post"

britmcman99
 

Jim:

Just ask
Phil Langford, Brad Moore and Geoff Rutledge.



That's Lankford! with a K! You're gonna upset the Langfords if you don't
stop using their name so loosely.

By the way, the well built Q200 is a better airplane than I thought could be
in existence - Two people side by side with modest baggage, 180 MPH
everywhere, 6 GPH, small footprint and capable of sharing a hanger with other Qs,
D'Flys or Long Ezes.

Phil LanKford
N870BM


Re: Q1 Engines, Props, Cowls

Tony <antson@...>
 

Sir, How much are the nose cowls?

Thanks, Tony

----- Original Message -----
From: mulqueen@...
To: Q-LIST@...
Sent: Tuesday, May 10, 2005 3:58 PM
Subject: Re: [Q-LIST] Q1 Engines, Props, Cowls


What are your prices?
Jack

-----Original Message-----
From: re5ande1 <ckcoleman@...>
To: Q-LIST@...
Sent: Tue, 10 May 2005 02:01:03 -0000
Subject: [Q-LIST] Q1 Engines, Props, Cowls


If anyone is working on a Q1 project I have some parts which are now
available:

2 Onan engines, one is zero time, the other has minimum time. Both
have been in storage since 1989. Includes propeller flanges.

2 propellers: 44x32 scimitar design and 40x30 both in new condition

2 nose cowls for the Onan configured Q1. One is brand new, the two
halves have never been drilled; the other is used but in excellent
condition.







Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


Re: quickies at Oshkosh

Letempt, Jeffrey MR <jeffrey.letempt@...>
 

The Dragonfly rights were sold last year and the new owners are getting
ready to offer quick build kits "soon". The Dragonfly is a plans built
aircraft with the option of buying some pre-fab components or an complete
kit (soon). Plans are available for purchase today. The Dragonfly design
owners have a web site at www.dart-industries.com There are some errors on
their web site, they even show a couple pictures of Dave Dugas's, Ernest
Martin's, and Jim Patillo's Q's.....but they are trying.

I would say there is considerably more support available for the Dragonfly
than the Q2 family of aircraft. It is not practicable (possible?) for
anyone to build a Q2 from plans. There is a company who claims ownership of
the Dragonfly design and are wanting to make a go of it. With a set of
Dragonfly plans and support from the Dragonfly email list and Dragonfly
Builders and Flyers Newsletter you can scratch build a Dragonfly today from
plans. If the company goes out of business tomorrow you can still build
that same Dragonfly from those plans. The plans are not the most detailed
in the world, but an average builder with average skills can (has been done
hundreds of times) build a Dragonfly with the information provided.

The Dragonfly owners are planning on updating the plans. Dragonfly's have
been scratch built in less than 2 years (I would not say that is typical by
any means). My Dragonfly kit was built in about 20 months (not by me).
There are several "low cost" airplanes out there. I considered a wide
variety of airplanes before I bought my Dragonfly project. I thought it was
very hard to beat the bang for the buck and the safety of the Dragonfly.

I am not saying anything bad about the Q family of aircraft at all, I think
we are one big happy tandem wing family. I hope to see some of you guys at
the Spring Fling in a couple weeks.

Jeff

-----Original Message-----
From: HawkiDoug [mailto:hawkidoug@...]
Sent: Wednesday, May 11, 2005 5:29 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Re: quickies at Oshkosh


With all due respect, I would have to say the Dragonfly is not being
supported very well these days either. I know Jeff Letempt is on this list
and maybe he can shed some light on the subject. However, do compare the
Quickie to lots of alternatives as John says. Take your time and become
informed. You'll be happier in the end.

PS: I like my Q2 a lot! :)

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "JohntenHave" <Jtenhave@...>
To: <Q-LIST@...>
Sent: Wednesday, May 11, 2005 4:05 PM
Subject: [Q-LIST] Re: quickies at Oshkosh


Brad,

whilst is is possible to find latent projects around,(and these are
often the lowest entry cost option) you might be better to consider
the dragonfly or the raptor as projects with more complete
documentation and or support. My understanding is that it is still
possible to obtain all the parts for Dragonfly without undue
difficulty. The decision you make now will knock on for several
years. May I also suggest that you do what ever is required to get a
ride or at least a sit in the project you intend to build. There is
nothing worse than the late realisation that your expectation did
not equal the reality. That said, there is nothing better than
finding the reality exceeds the dream!

John

--- In Q-LIST@..., Brad Walker <bwalker@m...> wrote:
I'm seriously looking at building a Q-200 and I appreciate all the
help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or
anything.
I've attended Oshkosh in the past but never with the intention of
purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet
people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of
town.. 8-(





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Re: Quickies and Dragonflys "long post"

Jim Patillo
 

Brad,

While John Tenhave is correct in stating the decision you make now
can take several years to build, there's nothing faster or more fun
for the money than a Q200, which I doubt John has ever riden in.

I know I'll get hastled for this but, the fact of the matter is,
when a Quickie and Dragonfly event takes place almost anywhere, the
planes flying and giving rides are Q200's. Why is that?
I've been around the show circuit and Tandem Wing events for many
years and the last 5 with mine. I know what I'm saying to you is
true.

I'm really not knocking the Dragonfly, in fact they are neat
airplanes with large cabins, great headroom and docile
characteristics, but they don't haul as much, handle turbulence as
well, respond to stick commands as quickly or go near as fast.
That's what makes a Quickie a Quickie.

Given the fact Rex started Dragonfly the same time as QAC and out
sold Quickie in sheer numbers of kits(Quickie went out of business
in the early 80's), why aren't more of them showing up at shows or
Oshkosh than Quickies for example. There's no question the Dragonfly
had much better backing over the years (Quickie Factory help was
nonexistant). Despite that many sucecssful Q's flying. Just look at
the Builders List and compare.

Either way you cut it these planes take a long time to build. Which
airplane you pick is obviously is a matter of preference for your
skill and comfort level. Whichever catagory you fit into is the way
you should look at it. You might want to talk to Tim Iverson on the
Dragonfly List as he got his first ride in a Q200 a couple of weeks
ago. He should be able to make a good comparison.

Further if you are serious, you may want to search out one already
built and flying. I've directed friends that way over the last few
years and there's no question it can be a good way to go. Just ask
Phil Langford, Brad Moore and Geoff Rutledge. If on the other hand
you like building and want to spend several years doing so (mine
only took 19 years)go for it. Many of us started our kits when we
were young now were getting old. That doesn't leave many years for
flying.

I can honestly say that "reality has exceeded my dreams" but knowing
what I know now, I would have bought my Quickie if that option had
been available then! I hope this helps, By the way, I'm an idiot and
biased!

Jim Patillo 600 hours in N46JP Q200 and loving every minute of it.



<Jtenhave@m...> wrote:
Brad,

whilst is is possible to find latent projects around,(and these
are
often the lowest entry cost option) you might be better to
consider
the dragonfly or the raptor as projects with more complete
documentation and or support. My understanding is that it is still
possible to obtain all the parts for Dragonfly without undue
difficulty. The decision you make now will knock on for several
years. May I also suggest that you do what ever is required to get
a
ride or at least a sit in the project you intend to build. There
is
nothing worse than the late realisation that your expectation did
not equal the reality. That said, there is nothing better than
finding the reality exceeds the dream!

John

--- In Q-LIST@..., Brad Walker <bwalker@m...> wrote:
I'm seriously looking at building a Q-200 and I appreciate all
the
help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq
or
anything.
I've attended Oshkosh in the past but never with the intention
of
purchasing
a kit. Well, now is the time to make the plunge. I was hoping
meet
people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of
town.. 8-(


Re: quickies at Oshkosh

HawkiDoug <hawkidoug@...>
 

With all due respect, I would have to say the Dragonfly is not being supported very well these days either. I know Jeff Letempt is on this list and maybe he can shed some light on the subject. However, do compare the Quickie to lots of alternatives as John says. Take your time and become informed. You'll be happier in the end.

PS: I like my Q2 a lot! :)

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974

----- Original Message -----
From: "JohntenHave" <Jtenhave@...>
To: <Q-LIST@...>
Sent: Wednesday, May 11, 2005 4:05 PM
Subject: [Q-LIST] Re: quickies at Oshkosh


Brad,

whilst is is possible to find latent projects around,(and these are
often the lowest entry cost option) you might be better to consider
the dragonfly or the raptor as projects with more complete
documentation and or support. My understanding is that it is still
possible to obtain all the parts for Dragonfly without undue
difficulty. The decision you make now will knock on for several
years. May I also suggest that you do what ever is required to get a
ride or at least a sit in the project you intend to build. There is
nothing worse than the late realisation that your expectation did
not equal the reality. That said, there is nothing better than
finding the reality exceeds the dream!

John

--- In Q-LIST@..., Brad Walker <bwalker@m...> wrote:
I'm seriously looking at building a Q-200 and I appreciate all the
help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or
anything.
I've attended Oshkosh in the past but never with the intention of
purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet
people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of
town.. 8-(





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links






Re: quickies at Oshkosh

JohntenHave <Jtenhave@...>
 

Brad,

whilst is is possible to find latent projects around,(and these are
often the lowest entry cost option) you might be better to consider
the dragonfly or the raptor as projects with more complete
documentation and or support. My understanding is that it is still
possible to obtain all the parts for Dragonfly without undue
difficulty. The decision you make now will knock on for several
years. May I also suggest that you do what ever is required to get a
ride or at least a sit in the project you intend to build. There is
nothing worse than the late realisation that your expectation did
not equal the reality. That said, there is nothing better than
finding the reality exceeds the dream!

John

--- In Q-LIST@..., Brad Walker <bwalker@m...> wrote:
I'm seriously looking at building a Q-200 and I appreciate all the
help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or
anything.
I've attended Oshkosh in the past but never with the intention of
purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet
people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of
town.. 8-(


Re: quickies at Oshkosh

HawkiDoug <hawkidoug@...>
 

To Brad & all. I have requested a forum for Airventure but do not have a location or time yet. I'll keep you posted.

Haven't decided on a BBQ yet. Fellow QBA'er Mike Brown has had one in the past, so if he is listening maybe he can speak up on this topic. I'm camping as well, but have planned anything yet.

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974

----- Original Message -----
From: "Brad Walker" <bwalker@...>
To: <Q-LIST@...>
Sent: Wednesday, May 11, 2005 9:53 AM
Subject: [Q-LIST] quickies at Oshkosh


I'm seriously looking at building a Q-200 and I appreciate all the help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or anything.
I've attended Oshkosh in the past but never with the intention of purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of town.. 8-(



Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links







Re: quickies at Oshkosh

Patrick Panzera <panzera@...>
 

We didn't do so good at SnF this year, for the lack of good planning.
Maybe we can do better at OSH.

We'll be there camping, very near the main gate, with a 5th wheel trailer and 2
spaces. We certainly could host some sort of gathering with a lot of help.

Pat

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...] On Behalf Of Brad
Walker
Sent: Wednesday, May 11, 2005 7:53 AM
To: Q-LIST@...
Subject: [Q-LIST] quickies at Oshkosh

I'm seriously looking at building a Q-200 and I appreciate all the help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or anything.
I've attended Oshkosh in the past but never with the intention of purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of town.. 8-(



Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links





quickies at Oshkosh

Brad Walker
 

I'm seriously looking at building a Q-200 and I appreciate all the help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or anything.
I've attended Oshkosh in the past but never with the intention of purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of town.. 8-(


Re: quickies at Oshkosh

Peter Harris <peterjfharris@...>
 

Correcting last post Jeff I guess you are referring to the lack of any drawings for the hardware bits or the hull and that is a problem. Maybe someone will get a round tuit.
Peter

----- Original Message -----
From: Peter Harris
To: Q-LIST@...
Sent: Wednesday, May 11, 2005 10:02 PM
Subject: Re: [Q-LIST] Re: quickies at Oshkosh


Jeff how so you say the Q cannot be built from plans? Is there another way ?
Peter

< It is not practicable (possible?) for
anyone to build a Q2 from plans.>
Jeff




-----Original Message-----
From: HawkiDoug [mailto:hawkidoug@...]
Sent: Wednesday, May 11, 2005 5:29 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Re: quickies at Oshkosh


With all due respect, I would have to say the Dragonfly is not being
supported very well these days either. I know Jeff Letempt is on this list
and maybe he can shed some light on the subject. However, do compare the
Quickie to lots of alternatives as John says. Take your time and become
informed. You'll be happier in the end.

PS: I like my Q2 a lot! :)

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "JohntenHave" <Jtenhave@...>
To: <Q-LIST@...>
Sent: Wednesday, May 11, 2005 4:05 PM
Subject: [Q-LIST] Re: quickies at Oshkosh


> Brad,
>
> whilst is is possible to find latent projects around,(and these are
> often the lowest entry cost option) you might be better to consider
> the dragonfly or the raptor as projects with more complete
> documentation and or support. My understanding is that it is still
> possible to obtain all the parts for Dragonfly without undue
> difficulty. The decision you make now will knock on for several
> years. May I also suggest that you do what ever is required to get a
> ride or at least a sit in the project you intend to build. There is
> nothing worse than the late realisation that your expectation did
> not equal the reality. That said, there is nothing better than
> finding the reality exceeds the dream!
>
> John
>
> --- In Q-LIST@..., Brad Walker <bwalker@m...> wrote:
>> I'm seriously looking at building a Q-200 and I appreciate all the
> help that
>> people have provided.
>>
>> Is there going to be a gathering of quickies at Oshkosh or bbq or
> anything.
>> I've attended Oshkosh in the past but never with the intention of
> purchasing
>> a kit. Well, now is the time to make the plunge. I was hoping meet
> people
>> and ask a lot of questions.
>>
>> Thanks.
>>
>> -brad w.
>>
>> ps: I can't make the Tandem Wing Spring Fling because I'm out of
> town.. 8-(
>
>
>
>
>
> Quickie Builders Association WEB site
> http://www.quickiebuilders.org
>
>
> Yahoo! Groups Links
>
>
>
>
>
>




Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links






Quickie Builders Association WEB site
http://www.quickiebuilders.org






--------------------------------------------------------------------------------

Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.







Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


Re: Stripped Sparkplug Hole

BarryAir <barryair@...>
 

Dave,,,

use some spark plug anti seize to help stop plugs from striping out your plug holes....also , make sure the plug isn't too long....its carbon build up on the protruding threads that make it hard to remove plugs...


BT...


Stripped Sparkplug Hole

Dave Dugas
 

Leon, Thanks for the info. I've got a threaded insert for it and have tapped the threads for it. It's going to work fine. Dave Dugas


---------------------------------
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.


Re: quickies at Oshkosh

Peter Harris <peterjfharris@...>
 

Jeff how so you say the Q cannot be built from plans? Is there another way ?
Peter

< It is not practicable (possible?) for
anyone to build a Q2 from plans.>
Jeff

-----Original Message-----
From: HawkiDoug [mailto:hawkidoug@...]
Sent: Wednesday, May 11, 2005 5:29 PM
To: Q-LIST@...
Subject: Re: [Q-LIST] Re: quickies at Oshkosh


With all due respect, I would have to say the Dragonfly is not being
supported very well these days either. I know Jeff Letempt is on this list
and maybe he can shed some light on the subject. However, do compare the
Quickie to lots of alternatives as John says. Take your time and become
informed. You'll be happier in the end.

PS: I like my Q2 a lot! :)

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "JohntenHave" <Jtenhave@...>
To: <Q-LIST@...>
Sent: Wednesday, May 11, 2005 4:05 PM
Subject: [Q-LIST] Re: quickies at Oshkosh


Brad,

whilst is is possible to find latent projects around,(and these are
often the lowest entry cost option) you might be better to consider
the dragonfly or the raptor as projects with more complete
documentation and or support. My understanding is that it is still
possible to obtain all the parts for Dragonfly without undue
difficulty. The decision you make now will knock on for several
years. May I also suggest that you do what ever is required to get a
ride or at least a sit in the project you intend to build. There is
nothing worse than the late realisation that your expectation did
not equal the reality. That said, there is nothing better than
finding the reality exceeds the dream!

John

--- In Q-LIST@..., Brad Walker <bwalker@m...> wrote:
I'm seriously looking at building a Q-200 and I appreciate all the
help that
people have provided.

Is there going to be a gathering of quickies at Oshkosh or bbq or
anything.
I've attended Oshkosh in the past but never with the intention of
purchasing
a kit. Well, now is the time to make the plunge. I was hoping meet
people
and ask a lot of questions.

Thanks.

-brad w.

ps: I can't make the Tandem Wing Spring Fling because I'm out of
town.. 8-(





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links






Quickie Builders Association WEB site
http://www.quickiebuilders.org






--------------------------------------------------------------------------------

Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Q-LIST/

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@...

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


Re: View my photos: Laughlin 2005 and My Stuff

Bruce Crain
 

Fantastic way to show your pics Jim!! Thoroughly enjoyed looking! Wish Paul and I could have made the trip but it was just not safe for a north or south run. Hawkeye you could use some of this stuff in the newsletter. Make Jim the "poster boy"! ;o)
Bruce


___________________________________________________________________
Speed up your surfing with Juno SpeedBand.
Now includes pop-up blocker!
Only $14.95/month -visit http://www.juno.com/surf to sign up today!


Re: New Q1 project

Jon Finley <jon@...>
 

Where are you located John?

Back issues of Q-Talk are a must have for building. Ask away with your
questions.

Jon Finley
N90MG Q2 - Subaru EJ-22 DD - 467 Hrs. TT
Apple Valley, Minnesota
<http://www.finleyweb.net/Q2Subaru> http://www.FinleyWeb.net/Q2Subaru

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...] On Behalf
Of John Bolding
Sent: Tuesday, May 10, 2005 11:54 AM
To: Q-LIST@...
Subject: [Q-LIST] New Q1 project


I am considering starting a Q1 project in the next year or so (2 other
projects to finish up first) and wish to visit with someone for awhile
who has been built one. This will be my 5th homebuilt (RV3, Glasair,
701 and Legal Eagle)so fabing the metal parts that came in the kit is
not a problem but there are undoubtly some forks in the road and Yogi
says you gotta take it. Would prefer to talk to someone who has taken
them already. If all the necessary info is in the back issues I'll get
them as well. Am thinking about 2 cyl VW or Corvair (Building one each
for the Legal Eagle) or maybe even the 4a084 if I can shed some #s.
THANKS John Bolding
off list is fine if you prefer


Re: Fuel filler problem and brake seals.

Larry Severson
 

You are a man of (too) few words.
I still do not understand your fuel system or your 'problem'.
* 1. I have a fuel cap in the header tank.
* 2. There is a 2" PVC pipe starting 2.5" below the cap that goes down
and back to the main tank.
* 3. There is a tank vent at the rear of the header tank that goes
down and forward.
* 4. Until the main tank is filled, the last 2.5" of header tank can
not be filled.
* 5. I just found a solution for the potential of trapping fuel in the
vent - drill a very small hole at the back of where the vent turns forward.
Larry Severson
Fountain Valley, CA 92708
(714) 968-9852
larry2@...


Re: Q1 Engines, Props, Cowls

Webcave
 

What are your prices?
Jack

-----Original Message-----
From: re5ande1 <ckcoleman@...>
To: Q-LIST@...
Sent: Tue, 10 May 2005 02:01:03 -0000
Subject: [Q-LIST] Q1 Engines, Props, Cowls


If anyone is working on a Q1 project I have some parts which are now
available:

2 Onan engines, one is zero time, the other has minimum time. Both
have been in storage since 1989. Includes propeller flanges.

2 propellers: 44x32 scimitar design and 40x30 both in new condition

2 nose cowls for the Onan configured Q1. One is brand new, the two
halves have never been drilled; the other is used but in excellent
condition.







Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


View my photos: Our Ranch in Angles Camp, CA 2004

Jim Patillo
 

You're invited to view my online photos at the Gallery. Enjoy!

You're invited to view these photos online at Kodak Easyshare Gallery!
Just click on View Photos to get started.
http://www.kodakgallery.com/I.jsp?c=kyp7x9i.5h5u3nlm&x=1&y=reacu6

If you'd like to save this album, just sign in, or
if you're new to the Gallery, create a free account.
Once you've signed in, you'll be able to view this
album whenever you want and order Kodak prints of
your favorite photos.

Enjoy!

Instructions: Click view photos to begin. If you're
an existing member you'll be asked to sign
in. If not, you can join the Gallery for free.
http://www.kodakgallery.com/Register.jsp

Questions? Visit http://help.kodakgallery.com.

------------------------------------------------
EASYSHARE Gallery Customer Service
http://help.kodakgallery.com/support
Phone: (800) 360-9098
Outside the US and Canada: (512) 651-9770
------------------------------------------------

If you cannot see the links above, copy and paste the
following URL directly into your browser:
http://www.kodakgallery.com/I.jsp?c=kyp7x9i.5h5u3nlm&x=1&y=reacu6