Date   

Re: Canard Build table

damiantwinsport@...
 

Leon ,thanks any progress on the Marske style spar test?

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Leon - C <leon@cstreetshop.com>
To: Q-LIST@yahoogroups.com
Sent: Mon, 29 Aug 2005 14:50:02 -0600
Subject: Re: [Q-LIST] Canard Build table


My table is 24" X 16'. I like the width but if I had it to do over I'd make
it at least 17' long...........
I laid particle board over my old rotor blade table which is very stiff and
can be twisted with turn buckles to make it flat or with wash out. Put some
castors under it as well so you can push it to the side of the shop. When I
need a large surface - like for cutting fabric - I just drop a couple of
1/4" sheets of hardboard/Masonite on the floor. Other than that the 24"
width is fine for a general use work table.

Don't make it any wider than you can comfortably reach to the center of
while sanding, and keep it tall enough that you don't have to bend over.
I'm 5'6" and I like it 38" to 39" tall.
============
Leon McAtee
Home from my second week at the new job. 2 autos to service, a lawn (hay
field now) to mow, cloths to wash and then some Quickie buildn' :-)

----- Original Message -----
From: <damiantwinsport@aol.com>
To: <Q-LIST@yahoogroups.com>
Sent: Friday, August 26, 2005 4:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200




Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Re: LVK panorama shot

Mark Robinson
 

Come to think of it, this comment applies to all of
the "Q" guys at LVK.

--- Mark Robinson <secondfork@yahoo.com> wrote:

Great Shot(s).

Geoff is a man of many, many talents...

--- hgflier <hgflier@yahoo.com> wrote:

It was great to see everyone who came out to the
LVK
flyin last
weekend!

I put up on my website my first effort at making a
panorama shot of
the planes at the LVK flyin:

http://www.geoffreyrutledge.com/Album/N200AL/LVK2005/LVKpanorama-c.jpg

Cheers, Geoff






____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs




__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail


Re: Canard Build table

David J. Gall
 

I did 3' x 17'. The extra foot of particle board from the long sides of the 4x8 sheet went to tabletop for the last 1x3 section of the table, and the remaining 1x8 and 1x5 pieces make dandy shelves. The structure of the table is such that if I ever want to, I can cut in two places and have two 3x8 tables. Just add legs.

(I sure hope 3x17 is the right size...!)


David J. Gall

----- Original Message -----
From: "Leon - C" <leon@cstreetshop.com>
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table
Date: Mon, 29 Aug 2005 14:50:02 -0600


My table is 24" X 16'. I like the width but if I had it to do over I'd make
it at least 17' long...........
I laid particle board over my old rotor blade table which is very stiff and
can be twisted with turn buckles to make it flat or with wash out. Put some
castors under it as well so you can push it to the side of the shop. When I
need a large surface - like for cutting fabric - I just drop a couple of
1/4" sheets of hardboard/Masonite on the floor. Other than that the 24"
width is fine for a general use work table.

Don't make it any wider than you can comfortably reach to the center of
while sanding, and keep it tall enough that you don't have to bend over.
I'm 5'6" and I like it 38" to 39" tall.
============
Leon McAtee
Home from my second week at the new job. 2 autos to service, a lawn (hay
field now) to mow, cloths to wash and then some Quickie buildn' :-)

----- Original Message -----
From: <damiantwinsport@aol.com>
To: <Q-LIST@yahoogroups.com>
Sent: Friday, August 26, 2005 4:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200


Re: Looking for Geoff Rutledge

bob <bob2@...>
 

smidude@geoffreyrutledge.com

On Aug 29, 2005, at 16:56, Doug Humble wrote:

Anybody know Geoff Rutledge's email address???

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "Doug Humble" <hawkidoug@cox.net>
To: "Q-List" <Q-List@yahoogroups.com>
Sent: Thursday, August 25, 2005 7:53 PM
Subject: [Q-LIST] Looking for Geoff Rutledge



Geoff Rutledge, would you please contact me off list at HawkiDoug@cox.net
. Thanks!

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links









------------------------ Yahoo! Groups Sponsor --------------------
~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/SyTolB/TM
--------------------------------------------------------------------
~->

Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links







Re: Looking for Geoff Rutledge

Bob Farnam <bfarnam@...>
 

hgflier@yahoo.com

Bob F.
N200QK
EAA Flight Advisor

-----Original Message-----
From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com]On Behalf Of
Doug Humble
Sent: Monday, August 29, 2005 2:56 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Looking for Geoff Rutledge


Anybody know Geoff Rutledge's email address???

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "Doug Humble" <hawkidoug@cox.net>
To: "Q-List" <Q-List@yahoogroups.com>
Sent: Thursday, August 25, 2005 7:53 PM
Subject: [Q-LIST] Looking for Geoff Rutledge


> Geoff Rutledge, would you please contact me off list at
HawkiDoug@cox.net
> . Thanks!
>
> Doug "Hawkeye" Humble
> www.asignabove.net
> Omaha NE
> N25974
>
>
>
>
>
>
> Quickie Builders Association WEB site
> http://www.quickiebuilders.org
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>



Quickie Builders Association WEB site
http://www.quickiebuilders.org





----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--


Re: Looking for Geoff Rutledge

Doug Humble <hawkidoug@...>
 

Anybody know Geoff Rutledge's email address???

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974

----- Original Message -----
From: "Doug Humble" <hawkidoug@cox.net>
To: "Q-List" <Q-List@yahoogroups.com>
Sent: Thursday, August 25, 2005 7:53 PM
Subject: [Q-LIST] Looking for Geoff Rutledge


Geoff Rutledge, would you please contact me off list at HawkiDoug@cox.net . Thanks!

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links







Re: Canard Build table

Leon - C <leon@...>
 

My table is 24" X 16'. I like the width but if I had it to do over I'd make
it at least 17' long...........
I laid particle board over my old rotor blade table which is very stiff and
can be twisted with turn buckles to make it flat or with wash out. Put some
castors under it as well so you can push it to the side of the shop. When I
need a large surface - like for cutting fabric - I just drop a couple of
1/4" sheets of hardboard/Masonite on the floor. Other than that the 24"
width is fine for a general use work table.

Don't make it any wider than you can comfortably reach to the center of
while sanding, and keep it tall enough that you don't have to bend over.
I'm 5'6" and I like it 38" to 39" tall.
============
Leon McAtee
Home from my second week at the new job. 2 autos to service, a lawn (hay
field now) to mow, cloths to wash and then some Quickie buildn' :-)

----- Original Message -----
From: <damiantwinsport@aol.com>
To: <Q-LIST@yahoogroups.com>
Sent: Friday, August 26, 2005 4:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200


Re: Potential Quckie Owner's questions -- correction

Jim Patillo
 

Steve,

Minor detail. You should know that you can fly any type airplane and
then jump right in a Q200 and fly it! Shame on you!

Jim P. N46JP Q200

--- In Q-LIST@yahoogroups.com, "Steve" <sham@i...> wrote:
Except fot the fact that the wheel is on the wrong end of the
plane.

Steve Ham
----- Original Message -----
From: flywarrior
To: Q-LIST@yahoogroups.com
Sent: Sunday, August 28, 2005 10:25 AM
Subject: Re: [Q-LIST] Potential Quckie Owner's questions --
correction


I suggest you qualify in a Piper Tomahawk if you can find some
one with a
Q-2. It takes off and lands at 70 knots and is a good transition
aircraft to
use when moving in to a high performance aircraft.
----- Original Message -----
From: "Mike Perry" <dmperry1012@c...>
To: <Q-LIST@yahoogroups.com>
Sent: Saturday, August 27, 2005 11:30 PM
Subject: Re: [Q-LIST] Potential Quckie Owner's questions --
correction


> Sorry, I wrote "over 40 mph with the VW engine or at slower
speeds" but I
> meant over 40 miles per gallon with the VW or at slower speeds.
>
> Mike Perry
>
> At 08:46 PM 8/26/2005 -0700, you wrote:
>>Hi Dave -- I once considered buying a Katana so I'll take a
shot at this.
>>
>>You are talking about two totally different aircraft. The
Katana is a
>>trainer, flies safe, lands slow (about 50 knots on final). The
Q2/Q200 is
>>a hot rod. It flies safe but it lands very hot -- 75 knots or
greater on
>>final. The canard design makes it very safe, there is no stall
of the
>>main
>>wing. It is very efficient, with guys getting 30+ miles per
gallon, and
>>over 40 mph with the VW engine or at slower speeds.
>>
>>Also: The Q family are all experimental/homebuilt. No two are
>>alike. They require careful study of their idiosyncrasies, and
you will
>>have to be more involved in the maintenance. They can be
wonderful
>>airplanes, but they can also be dangerous (read the old
newsletters about
>>first flight fatalities).
>>
>>Perhaps the biggest difference is experimental vs. certified.
If your
>>experience is all in Cessna/Piper/Diamond trainers, you will
find huge
>>differences. I suggest you read "Spam Can or Homebuilt?" in
the May 2005
>>Aviation Consumer. I don't agree with everything said in the
article, but
>>it will give you a good place to start from.
>>
>>If you are still interested in a Q2/Q200 I suggest you come to
a fly-in or
>>visit a builder before you go any further.
>>
>>Mike Perry
>>(Still building)
>>
>>
>>At 07:47 PM 8/26/2005 +0000, you wrote:
>> >Good day,
>> >I've been looking at a q2 or q200 as a quick, efficient way
of getting
>> >around. But before I dive in, I'd like to know so
information and
>> >some solid number from both by people who actually fly them.
>> >How does it handle compared to a Katana? How does it stall?
>> >Whats the normal cruise speed? (really, dont exaggerate)
>> >Any tendency to spin?
>> >What the GPH rate at Cruise speed?
>> >How wide is the cabin?
>> >I have a million questions, but ill start with these.
>> >I've read all the quickie websites, but the numbers always
vary.
>> >Thanks again,
>> >Dave Robins 4V
>> >
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>>Quickie Builders Association WEB site
>><http://www.quickiebuilders.org>http://www.quickiebuilders.org
>>
>>
>>
>>
>>
>>----------
>>YAHOO! GROUPS LINKS
>>
>> * Visit your group "<http://groups.yahoo.com/group/Q-
LIST>Q-LIST" on
>> the web.
>> *
>> * To unsubscribe from this group, send an email to:
>> *
>> <mailto:Q-LIST-unsubscribe@yahoogroups.com?
subject=Unsubscribe>Q-LIST-unsubscribe@yahoogroups.com
>>
>> *
>> * Your use of Yahoo! Groups is subject to the
>> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>>
>>
>>----------
>
>
>
>
>
>
>
>
> Quickie Builders Association WEB site
> http://www.quickiebuilders.org
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>



Quickie Builders Association WEB site
http://www.quickiebuilders.org





--------------------------------------------------------------------
----------
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.


--------------------------------------------------------------------
----------




Re: Potential Quckie Owner's questions -- correction

Steve <sham@...>
 

Except fot the fact that the wheel is on the wrong end of the plane.

Steve Ham

----- Original Message -----
From: flywarrior
To: Q-LIST@yahoogroups.com
Sent: Sunday, August 28, 2005 10:25 AM
Subject: Re: [Q-LIST] Potential Quckie Owner's questions -- correction


I suggest you qualify in a Piper Tomahawk if you can find some one with a
Q-2. It takes off and lands at 70 knots and is a good transition aircraft to
use when moving in to a high performance aircraft.
----- Original Message -----
From: "Mike Perry" <dmperry1012@charter.net>
To: <Q-LIST@yahoogroups.com>
Sent: Saturday, August 27, 2005 11:30 PM
Subject: Re: [Q-LIST] Potential Quckie Owner's questions -- correction


> Sorry, I wrote "over 40 mph with the VW engine or at slower speeds" but I
> meant over 40 miles per gallon with the VW or at slower speeds.
>
> Mike Perry
>
> At 08:46 PM 8/26/2005 -0700, you wrote:
>>Hi Dave -- I once considered buying a Katana so I'll take a shot at this.
>>
>>You are talking about two totally different aircraft. The Katana is a
>>trainer, flies safe, lands slow (about 50 knots on final). The Q2/Q200 is
>>a hot rod. It flies safe but it lands very hot -- 75 knots or greater on
>>final. The canard design makes it very safe, there is no stall of the
>>main
>>wing. It is very efficient, with guys getting 30+ miles per gallon, and
>>over 40 mph with the VW engine or at slower speeds.
>>
>>Also: The Q family are all experimental/homebuilt. No two are
>>alike. They require careful study of their idiosyncrasies, and you will
>>have to be more involved in the maintenance. They can be wonderful
>>airplanes, but they can also be dangerous (read the old newsletters about
>>first flight fatalities).
>>
>>Perhaps the biggest difference is experimental vs. certified. If your
>>experience is all in Cessna/Piper/Diamond trainers, you will find huge
>>differences. I suggest you read "Spam Can or Homebuilt?" in the May 2005
>>Aviation Consumer. I don't agree with everything said in the article, but
>>it will give you a good place to start from.
>>
>>If you are still interested in a Q2/Q200 I suggest you come to a fly-in or
>>visit a builder before you go any further.
>>
>>Mike Perry
>>(Still building)
>>
>>
>>At 07:47 PM 8/26/2005 +0000, you wrote:
>> >Good day,
>> >I've been looking at a q2 or q200 as a quick, efficient way of getting
>> >around. But before I dive in, I'd like to know so information and
>> >some solid number from both by people who actually fly them.
>> >How does it handle compared to a Katana? How does it stall?
>> >Whats the normal cruise speed? (really, dont exaggerate)
>> >Any tendency to spin?
>> >What the GPH rate at Cruise speed?
>> >How wide is the cabin?
>> >I have a million questions, but ill start with these.
>> >I've read all the quickie websites, but the numbers always vary.
>> >Thanks again,
>> >Dave Robins 4V
>> >
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>>Quickie Builders Association WEB site
>><http://www.quickiebuilders.org>http://www.quickiebuilders.org
>>
>>
>>
>>
>>
>>----------
>>YAHOO! GROUPS LINKS
>>
>> * Visit your group "<http://groups.yahoo.com/group/Q-LIST>Q-LIST" on
>> the web.
>> *
>> * To unsubscribe from this group, send an email to:
>> *
>> <mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>Q-LIST-unsubscribe@yahoogroups.com
>>
>> *
>> * Your use of Yahoo! Groups is subject to the
>> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>>
>>
>>----------
>
>
>
>
>
>
>
>
> Quickie Builders Association WEB site
> http://www.quickiebuilders.org
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>



Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------


Im at Torrance, near Los Angeles.

whizkeyfox
 

Dave Robins


Re: Another question from the Newbie.

Ryan
 

Dave,

Where are you located?
I am in San Diego, CA. and have a Q1.

Ryan
http://groups.yahoo.com/group/Q1_Aircraft

--- In Q-LIST@yahoogroups.com, "whizkeyfox" <whizkeyfox@y...> wrote:
Is there anyone in southern california who has a quickie or is in the
process of building on. If there is, I'd love to check it out and
give you a hand building it if you need help.
Dave Robins 4V


Re: Another question from the Newbie.

damiantwinsport@...
 

Dave, I have a crashed Q200 and I live in Los Angeles. I am not an expert on Qs but am a qualified composites guy. I am doing repairs to bird at Compton EAA 96 hangar. Call me if you like.310-670-6423
cell 310-493-8431

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: whizkeyfox <whizkeyfox@yahoo.com>
To: Q-LIST@yahoogroups.com
Sent: Sun, 28 Aug 2005 19:52:30 -0000
Subject: [Q-LIST] Another question from the Newbie.


Is there anyone in southern california who has a quickie or is in the
process of building on. If there is, I'd love to check it out and
give you a hand building it if you need help.
Dave Robins 4V





Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Another question from the Newbie.

whizkeyfox
 

Is there anyone in southern california who has a quickie or is in the
process of building on. If there is, I'd love to check it out and
give you a hand building it if you need help.
Dave Robins 4V


Re: Potential Quckie Owner's questions -- correction

Robert Justin
 

I suggest you qualify in a Piper Tomahawk if you can find some one with a Q-2. It takes off and lands at 70 knots and is a good transition aircraft to use when moving in to a high performance aircraft.

----- Original Message -----
From: "Mike Perry" <dmperry1012@charter.net>
To: <Q-LIST@yahoogroups.com>
Sent: Saturday, August 27, 2005 11:30 PM
Subject: Re: [Q-LIST] Potential Quckie Owner's questions -- correction


Sorry, I wrote "over 40 mph with the VW engine or at slower speeds" but I
meant over 40 miles per gallon with the VW or at slower speeds.

Mike Perry

At 08:46 PM 8/26/2005 -0700, you wrote:
Hi Dave -- I once considered buying a Katana so I'll take a shot at this.

You are talking about two totally different aircraft. The Katana is a
trainer, flies safe, lands slow (about 50 knots on final). The Q2/Q200 is
a hot rod. It flies safe but it lands very hot -- 75 knots or greater on
final. The canard design makes it very safe, there is no stall of the main
wing. It is very efficient, with guys getting 30+ miles per gallon, and
over 40 mph with the VW engine or at slower speeds.

Also: The Q family are all experimental/homebuilt. No two are
alike. They require careful study of their idiosyncrasies, and you will
have to be more involved in the maintenance. They can be wonderful
airplanes, but they can also be dangerous (read the old newsletters about
first flight fatalities).

Perhaps the biggest difference is experimental vs. certified. If your
experience is all in Cessna/Piper/Diamond trainers, you will find huge
differences. I suggest you read "Spam Can or Homebuilt?" in the May 2005
Aviation Consumer. I don't agree with everything said in the article, but
it will give you a good place to start from.

If you are still interested in a Q2/Q200 I suggest you come to a fly-in or
visit a builder before you go any further.

Mike Perry
(Still building)


At 07:47 PM 8/26/2005 +0000, you wrote:
Good day,
I've been looking at a q2 or q200 as a quick, efficient way of getting
around. But before I dive in, I'd like to know so information and
some solid number from both by people who actually fly them.
How does it handle compared to a Katana? How does it stall?
Whats the normal cruise speed? (really, dont exaggerate)
Any tendency to spin?
What the GPH rate at Cruise speed?
How wide is the cabin?
I have a million questions, but ill start with these.
I've read all the quickie websites, but the numbers always vary.
Thanks again,
Dave Robins 4V








Quickie Builders Association WEB site
<http://www.quickiebuilders.org>http://www.quickiebuilders.org





----------
YAHOO! GROUPS LINKS

* Visit your group "<http://groups.yahoo.com/group/Q-LIST>Q-LIST" on
the web.
*
* To unsubscribe from this group, send an email to:
*
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>Q-LIST-unsubscribe@yahoogroups.com

*
* Your use of Yahoo! Groups is subject to the
<http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.


----------






Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links







Re: Canard Build table

damiantwinsport@...
 

Ron Looks good, I wish I had as much free space as you. LOL looks like you got a mini plane factory going!

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 27 Aug 2005 18:39:46 -0700
Subject: RE: [Q-LIST] Canard Build table


Damian and others, I just uploaded 3 more picts to the Q list photos and 2
to my web site for the Q200. I am just about ready to glass the upper
portion of the plenums, have them removed from the engine. Will be glassing
two bio layers and one Carbon Fibre layer to make them pretty. All I did for
the Q1 was to cut some of the motor mount pieces.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Saturday, August 27, 2005 10:46 AM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Ron, thanks I have a bit of Space isssue at EAA 96 hangar so I am trying to
optimize/ minimize space usage. Their 20' X 20" spaces are a bit exaggerated
Mr. tape measure says they are 18.5X18.5.

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 27 Aug 2005 01:27:44 -0700
Subject: RE: [Q-LIST] Canard Build table


Damian, When I did the wing and canard I did them at the same time, 4'
worked out fine, for just one 3' would be fine.

Ron





Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Friday, August 26, 2005 10:49 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Makes sense , Did you find that it was a big reach though?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 16:43:02 -0700
Subject: RE: [Q-LIST] Canard Build table


Ps to the note about the tables, I made them the same height as the rest of
the equipment in the workshop.



Ron



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Ron
Sent: Friday, August 26, 2005 4:31 PM
To: Q-LIST@yahoogroups.com
Subject: RE: [Q-LIST] Canard Build table



Similar to what Paul did, When I made my Dragonfly canard and wing I made 3
tables with wheels on them which I use to this day. They were 6'X4'.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Paul Buckley
Sent: Friday, August 26, 2005 4:12 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Yes, but you will need to build a small extension at each end to accomodate
the wing tips and the BL100 jig.
No problem, they will only extend 4 to 5 inches and be only about 10 inches
or so long.
But why don't you make the table a little wider, it will be so much more
useful?
I made two tables, 8' X 3', and bolted them together.
Now that the wings are finished they make two good work benches.

Paul Buckley
----- Original Message -----
From: damiantwinsport@aol.com
To: Q-LIST@yahoogroups.com
Sent: Friday, August 26, 2005 11:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Rene Robertson <q2robertson@yahoo.ca>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 14:07:45 -0400 (EDT)
Subject: [Q-LIST] LVK Fly-in , C-FBWV back home


Melinda and I made it back home last night in C-FBWV after a terrific time
in
the Bay area!
Wow, we had a blast at the LVK fly-in. I cannot thank the guys and gals
at LVK
enough for putting on such a fun event. Special honours go to Bob and Jim
for
all of their hospitality and hard work. We really enjoyed meeting
everyone and
putting a lot of faces to names I see often on our list. You guys are a
great
bunch! I'm still on a high after chatting with everyone on Friday night
and all
day Saturday. Jim cooked up a Turkey that was just unbelievable.
Marinated in
his special blend of secret stuff and deep fried in peanut oil. As Bob
had
mentioned earlier on, this Turkey is so good you can eat it everyday.
This was the only time ever that we had seen so many Quickies and a
Dragonfly
together in living color. It was nice to get away to a place where the
weather
was consistently nice and temps were perfect ;)
We left LVK on Sunday ,(thanks again Bob and Jan), for Reid Hillview to
visit
with relatives in San Jose. On Wednesday morning 11:00 am we took off for
Half
Moon Bay for some of the crab Jim had recommended. San Jose Int'l Tower
directed us straight across midfield and asked us if we had the 737 in
sight on
downwind. As soon as we crossed the little ridge of mountians by the
coast we
were above a solid layer of overcast marine layer at 2500'. We decided to
carry
onto Half Moon Bay, but couldn't land due to the cloud cover. In fact if
it
wasn't for the GPS, I had no idea where we were. We told San Jose that we
would
carry on to the Golden Gate Bridge. No problem. Once there I could just
make
out the Bridge below and Alcatraz was clear, so we slipped down through a
hole
and flew over the Bridge at 1200', circled Alcatraz a couple of times and
took
lots of pictures of Frisco. What a blast! After that we carried onto
Redding
and homeward bound.
Thanks again to everyone for making our stay one to remember for a
lifetime. I
highly recommend that anyone who hasn't yet attended this fly-in to do so
next
year!

Rene & Melinda
Q2 C-FBWV



---------------------------------
Find your next car at Yahoo! Canada Autos






Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org





SPONSORED LINKS Aviation Quickie Recreation
Sports Aviation school Outdoor recreation


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--







Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____







Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
eation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=d6L
bAnVGd0FLDuW5XKtTDg>

Quickie
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
ation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=-5wj
zf-_G4rEBW55NEEc-w>

Recreation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
creation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=2
7E58bDl5ZcYMxljxO6B8A>


Sports
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
tion&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=rWpug
cCFs__v2Z71KYSvDA>

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+school&w1=Aviation&w2=Quickie&
&k=Aviation+school&w1=Aviation&w2=Quickie&
&k=Aviation+school&w1=Aviation&w2=Quickie&
w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.
sig=8vrvG63uw5awQqbMB-wYDw> school

Outdoor
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Outdoor+recreation&w1=Aviation&w2=Quick
&k=Outdoor+recreation&w1=Aviation&w2=Quick
&k=Outdoor+recreation&w1=Aviation&w2=Quick
ie&w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=10
0&.sig=43KWAXWSoypULtHANABYnQ> recreation



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
eation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=d6L
bAnVGd0FLDuW5XKtTDg>

Quickie
<http://groups.yahoo.com/gads?t=ms&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
ation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=-5wj
zf-_G4rEBW55NEEc-w>

Recreation
<http://groups.yahoo.com/gads?t=ms&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
creation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=2
7E58bDl5ZcYMxljxO6B8A>


Sports
<http://groups.yahoo.com/gads?t=ms&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
tion&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=rWpug
cCFs__v2Z71KYSvDA>

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+school&w1=Aviation&w2=Quickie&
w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.
sig=8vrvG63uw5awQqbMB-wYDw> school

Outdoor
<http://groups.yahoo.com/gads?t=ms&k=Outdoor+recreation&w1=Aviation&w2=Quick
ie&w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=10
0&.sig=43KWAXWSoypULtHANABYnQ> recreation



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Re: Potential Quckie Owner's questions -- correction

attorneyadam@...
 

I've got about 10 hours in a katana and the only thing in common is the
differential braking... Quickie will challenge your guts, make you a better
pilot, and either you'll love it or hate it! Flying a Q isn't the challenge,
but taking off at much higher speeds and landing at mach 9 will give you a
reason to go to church! Go fly with someone (more than once preferably) first,
think it over, and make your decision...


Re: Potential Quckie Owner's questions -- correction

Mike Perry <dmperry1012@...>
 

Sorry, I wrote "over 40 mph with the VW engine or at slower speeds" but I
meant over 40 miles per gallon with the VW or at slower speeds.

Mike Perry

At 08:46 PM 8/26/2005 -0700, you wrote:
Hi Dave -- I once considered buying a Katana so I'll take a shot at this.

You are talking about two totally different aircraft. The Katana is a
trainer, flies safe, lands slow (about 50 knots on final). The Q2/Q200 is
a hot rod. It flies safe but it lands very hot -- 75 knots or greater on
final. The canard design makes it very safe, there is no stall of the main
wing. It is very efficient, with guys getting 30+ miles per gallon, and
over 40 mph with the VW engine or at slower speeds.

Also: The Q family are all experimental/homebuilt. No two are
alike. They require careful study of their idiosyncrasies, and you will
have to be more involved in the maintenance. They can be wonderful
airplanes, but they can also be dangerous (read the old newsletters about
first flight fatalities).

Perhaps the biggest difference is experimental vs. certified. If your
experience is all in Cessna/Piper/Diamond trainers, you will find huge
differences. I suggest you read "Spam Can or Homebuilt?" in the May 2005
Aviation Consumer. I don't agree with everything said in the article, but
it will give you a good place to start from.

If you are still interested in a Q2/Q200 I suggest you come to a fly-in or
visit a builder before you go any further.

Mike Perry
(Still building)


At 07:47 PM 8/26/2005 +0000, you wrote:
Good day,
I've been looking at a q2 or q200 as a quick, efficient way of getting
around. But before I dive in, I'd like to know so information and
some solid number from both by people who actually fly them.
How does it handle compared to a Katana? How does it stall?
Whats the normal cruise speed? (really, dont exaggerate)
Any tendency to spin?
What the GPH rate at Cruise speed?
How wide is the cabin?
I have a million questions, but ill start with these.
I've read all the quickie websites, but the numbers always vary.
Thanks again,
Dave Robins 4V








Quickie Builders Association WEB site
<http://www.quickiebuilders.org>http://www.quickiebuilders.org





----------
YAHOO! GROUPS LINKS

* Visit your group "<http://groups.yahoo.com/group/Q-LIST>Q-LIST" on
the web.
*
* To unsubscribe from this group, send an email to:
*
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>Q-LIST-unsubscribe@yahoogroups.com

*
* Your use of Yahoo! Groups is subject to the
<http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.


----------


Re: Canard Build table

Ron <rondefly@...>
 

Damian and others, I just uploaded 3 more picts to the Q list photos and 2
to my web site for the Q200. I am just about ready to glass the upper
portion of the plenums, have them removed from the engine. Will be glassing
two bio layers and one Carbon Fibre layer to make them pretty. All I did for
the Q1 was to cut some of the motor mount pieces.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Saturday, August 27, 2005 10:46 AM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Ron, thanks I have a bit of Space isssue at EAA 96 hangar so I am trying to
optimize/ minimize space usage. Their 20' X 20" spaces are a bit exaggerated
Mr. tape measure says they are 18.5X18.5.

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 27 Aug 2005 01:27:44 -0700
Subject: RE: [Q-LIST] Canard Build table


Damian, When I did the wing and canard I did them at the same time, 4'
worked out fine, for just one 3' would be fine.

Ron





Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Friday, August 26, 2005 10:49 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Makes sense , Did you find that it was a big reach though?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 16:43:02 -0700
Subject: RE: [Q-LIST] Canard Build table


Ps to the note about the tables, I made them the same height as the rest of
the equipment in the workshop.



Ron



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Ron
Sent: Friday, August 26, 2005 4:31 PM
To: Q-LIST@yahoogroups.com
Subject: RE: [Q-LIST] Canard Build table



Similar to what Paul did, When I made my Dragonfly canard and wing I made 3
tables with wheels on them which I use to this day. They were 6'X4'.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Paul Buckley
Sent: Friday, August 26, 2005 4:12 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Yes, but you will need to build a small extension at each end to accomodate
the wing tips and the BL100 jig.
No problem, they will only extend 4 to 5 inches and be only about 10 inches
or so long.
But why don't you make the table a little wider, it will be so much more
useful?
I made two tables, 8' X 3', and bolted them together.
Now that the wings are finished they make two good work benches.

Paul Buckley
----- Original Message -----
From: damiantwinsport@aol.com
To: Q-LIST@yahoogroups.com
Sent: Friday, August 26, 2005 11:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Rene Robertson <q2robertson@yahoo.ca>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 14:07:45 -0400 (EDT)
Subject: [Q-LIST] LVK Fly-in , C-FBWV back home


Melinda and I made it back home last night in C-FBWV after a terrific time
in
the Bay area!
Wow, we had a blast at the LVK fly-in. I cannot thank the guys and gals
at LVK
enough for putting on such a fun event. Special honours go to Bob and Jim
for
all of their hospitality and hard work. We really enjoyed meeting
everyone and
putting a lot of faces to names I see often on our list. You guys are a
great
bunch! I'm still on a high after chatting with everyone on Friday night
and all
day Saturday. Jim cooked up a Turkey that was just unbelievable.
Marinated in
his special blend of secret stuff and deep fried in peanut oil. As Bob
had
mentioned earlier on, this Turkey is so good you can eat it everyday.
This was the only time ever that we had seen so many Quickies and a
Dragonfly
together in living color. It was nice to get away to a place where the
weather
was consistently nice and temps were perfect ;)
We left LVK on Sunday ,(thanks again Bob and Jan), for Reid Hillview to
visit
with relatives in San Jose. On Wednesday morning 11:00 am we took off for
Half
Moon Bay for some of the crab Jim had recommended. San Jose Int'l Tower
directed us straight across midfield and asked us if we had the 737 in
sight on
downwind. As soon as we crossed the little ridge of mountians by the
coast we
were above a solid layer of overcast marine layer at 2500'. We decided to
carry
onto Half Moon Bay, but couldn't land due to the cloud cover. In fact if
it
wasn't for the GPS, I had no idea where we were. We told San Jose that we
would
carry on to the Golden Gate Bridge. No problem. Once there I could just
make
out the Bridge below and Alcatraz was clear, so we slipped down through a
hole
and flew over the Bridge at 1200', circled Alcatraz a couple of times and
took
lots of pictures of Frisco. What a blast! After that we carried onto
Redding
and homeward bound.
Thanks again to everyone for making our stay one to remember for a
lifetime. I
highly recommend that anyone who hasn't yet attended this fly-in to do so
next
year!

Rene & Melinda
Q2 C-FBWV



---------------------------------
Find your next car at Yahoo! Canada Autos






Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org





SPONSORED LINKS Aviation Quickie Recreation
Sports Aviation school Outdoor recreation


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--







Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____







Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
eation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=d6L
bAnVGd0FLDuW5XKtTDg>

Quickie
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
ation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=-5wj
zf-_G4rEBW55NEEc-w>

Recreation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
creation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=2
7E58bDl5ZcYMxljxO6B8A>


Sports
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
tion&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=rWpug
cCFs__v2Z71KYSvDA>

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+school&w1=Aviation&w2=Quickie&
&k=Aviation+school&w1=Aviation&w2=Quickie&
&k=Aviation+school&w1=Aviation&w2=Quickie&
w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.
sig=8vrvG63uw5awQqbMB-wYDw> school

Outdoor
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Outdoor+recreation&w1=Aviation&w2=Quick
&k=Outdoor+recreation&w1=Aviation&w2=Quick
&k=Outdoor+recreation&w1=Aviation&w2=Quick
ie&w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=10
0&.sig=43KWAXWSoypULtHANABYnQ> recreation



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
eation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=d6L
bAnVGd0FLDuW5XKtTDg>

Quickie
<http://groups.yahoo.com/gads?t=ms&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
ation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=-5wj
zf-_G4rEBW55NEEc-w>

Recreation
<http://groups.yahoo.com/gads?t=ms&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
creation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=2
7E58bDl5ZcYMxljxO6B8A>


Sports
<http://groups.yahoo.com/gads?t=ms&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
tion&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=rWpug
cCFs__v2Z71KYSvDA>

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+school&w1=Aviation&w2=Quickie&
w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.
sig=8vrvG63uw5awQqbMB-wYDw> school

Outdoor
<http://groups.yahoo.com/gads?t=ms&k=Outdoor+recreation&w1=Aviation&w2=Quick
ie&w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=10
0&.sig=43KWAXWSoypULtHANABYnQ> recreation



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____


Re: Canard Build table

damiantwinsport@...
 

Ron, thanks I have a bit of Space isssue at EAA 96 hangar so I am trying to optimize/ minimize space usage. Their 20' X 20" spaces are a bit exaggerated Mr. tape measure says they are 18.5X18.5.

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 27 Aug 2005 01:27:44 -0700
Subject: RE: [Q-LIST] Canard Build table


Damian, When I did the wing and canard I did them at the same time, 4'
worked out fine, for just one 3' would be fine.

Ron





Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Friday, August 26, 2005 10:49 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Makes sense , Did you find that it was a big reach though?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 16:43:02 -0700
Subject: RE: [Q-LIST] Canard Build table


Ps to the note about the tables, I made them the same height as the rest of
the equipment in the workshop.



Ron



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Ron
Sent: Friday, August 26, 2005 4:31 PM
To: Q-LIST@yahoogroups.com
Subject: RE: [Q-LIST] Canard Build table



Similar to what Paul did, When I made my Dragonfly canard and wing I made 3
tables with wheels on them which I use to this day. They were 6'X4'.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Paul Buckley
Sent: Friday, August 26, 2005 4:12 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Yes, but you will need to build a small extension at each end to accomodate
the wing tips and the BL100 jig.
No problem, they will only extend 4 to 5 inches and be only about 10 inches
or so long.
But why don't you make the table a little wider, it will be so much more
useful?
I made two tables, 8' X 3', and bolted them together.
Now that the wings are finished they make two good work benches.

Paul Buckley
----- Original Message -----
From: damiantwinsport@aol.com
To: Q-LIST@yahoogroups.com
Sent: Friday, August 26, 2005 11:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Rene Robertson <q2robertson@yahoo.ca>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 14:07:45 -0400 (EDT)
Subject: [Q-LIST] LVK Fly-in , C-FBWV back home


Melinda and I made it back home last night in C-FBWV after a terrific time
in
the Bay area!
Wow, we had a blast at the LVK fly-in. I cannot thank the guys and gals
at LVK
enough for putting on such a fun event. Special honours go to Bob and Jim
for
all of their hospitality and hard work. We really enjoyed meeting
everyone and
putting a lot of faces to names I see often on our list. You guys are a
great
bunch! I'm still on a high after chatting with everyone on Friday night
and all
day Saturday. Jim cooked up a Turkey that was just unbelievable.
Marinated in
his special blend of secret stuff and deep fried in peanut oil. As Bob
had
mentioned earlier on, this Turkey is so good you can eat it everyday.
This was the only time ever that we had seen so many Quickies and a
Dragonfly
together in living color. It was nice to get away to a place where the
weather
was consistently nice and temps were perfect ;)
We left LVK on Sunday ,(thanks again Bob and Jan), for Reid Hillview to
visit
with relatives in San Jose. On Wednesday morning 11:00 am we took off for
Half
Moon Bay for some of the crab Jim had recommended. San Jose Int'l Tower
directed us straight across midfield and asked us if we had the 737 in
sight on
downwind. As soon as we crossed the little ridge of mountians by the
coast we
were above a solid layer of overcast marine layer at 2500'. We decided to
carry
onto Half Moon Bay, but couldn't land due to the cloud cover. In fact if
it
wasn't for the GPS, I had no idea where we were. We told San Jose that we
would
carry on to the Golden Gate Bridge. No problem. Once there I could just
make
out the Bridge below and Alcatraz was clear, so we slipped down through a
hole
and flew over the Bridge at 1200', circled Alcatraz a couple of times and
took
lots of pictures of Frisco. What a blast! After that we carried onto
Redding
and homeward bound.
Thanks again to everyone for making our stay one to remember for a
lifetime. I
highly recommend that anyone who hasn't yet attended this fly-in to do so
next
year!

Rene & Melinda
Q2 C-FBWV



---------------------------------
Find your next car at Yahoo! Canada Autos






Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org





SPONSORED LINKS Aviation Quickie Recreation
Sports Aviation school Outdoor recreation


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--







Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____







Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
eation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=d6L
bAnVGd0FLDuW5XKtTDg>

Quickie
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
ation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=-5wj
zf-_G4rEBW55NEEc-w>

Recreation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
creation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=2
7E58bDl5ZcYMxljxO6B8A>


Sports
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
tion&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=rWpug
cCFs__v2Z71KYSvDA>

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+school&w1=Aviation&w2=Quickie&
&k=Aviation+school&w1=Aviation&w2=Quickie&
w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.
sig=8vrvG63uw5awQqbMB-wYDw> school

Outdoor
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Outdoor+recreation&w1=Aviation&w2=Quick
&k=Outdoor+recreation&w1=Aviation&w2=Quick
ie&w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=10
0&.sig=43KWAXWSoypULtHANABYnQ> recreation



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Re: Canard Build table

Ron <rondefly@...>
 

Damian, When I did the wing and canard I did them at the same time, 4'
worked out fine, for just one 3' would be fine.

Ron





Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Friday, August 26, 2005 10:49 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Makes sense , Did you find that it was a big reach though?

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 16:43:02 -0700
Subject: RE: [Q-LIST] Canard Build table


Ps to the note about the tables, I made them the same height as the rest of
the equipment in the workshop.



Ron



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Ron
Sent: Friday, August 26, 2005 4:31 PM
To: Q-LIST@yahoogroups.com
Subject: RE: [Q-LIST] Canard Build table



Similar to what Paul did, When I made my Dragonfly canard and wing I made 3
tables with wheels on them which I use to this day. They were 6'X4'.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
Paul Buckley
Sent: Friday, August 26, 2005 4:12 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Canard Build table



Yes, but you will need to build a small extension at each end to accomodate
the wing tips and the BL100 jig.
No problem, they will only extend 4 to 5 inches and be only about 10 inches
or so long.
But why don't you make the table a little wider, it will be so much more
useful?
I made two tables, 8' X 3', and bolted them together.
Now that the wings are finished they make two good work benches.

Paul Buckley
----- Original Message -----
From: damiantwinsport@aol.com
To: Q-LIST@yahoogroups.com
Sent: Friday, August 26, 2005 11:40 PM
Subject: Re: [Q-LIST] Canard Build table


Folks ,what are the ideal dimensions for table to build LS1 canard on?
Willl a 2' X 16' be enough?

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Rene Robertson <q2robertson@yahoo.ca>
To: Q-LIST@yahoogroups.com
Sent: Fri, 26 Aug 2005 14:07:45 -0400 (EDT)
Subject: [Q-LIST] LVK Fly-in , C-FBWV back home


Melinda and I made it back home last night in C-FBWV after a terrific time
in
the Bay area!
Wow, we had a blast at the LVK fly-in. I cannot thank the guys and gals
at LVK
enough for putting on such a fun event. Special honours go to Bob and Jim
for
all of their hospitality and hard work. We really enjoyed meeting
everyone and
putting a lot of faces to names I see often on our list. You guys are a
great
bunch! I'm still on a high after chatting with everyone on Friday night
and all
day Saturday. Jim cooked up a Turkey that was just unbelievable.
Marinated in
his special blend of secret stuff and deep fried in peanut oil. As Bob
had
mentioned earlier on, this Turkey is so good you can eat it everyday.
This was the only time ever that we had seen so many Quickies and a
Dragonfly
together in living color. It was nice to get away to a place where the
weather
was consistently nice and temps were perfect ;)
We left LVK on Sunday ,(thanks again Bob and Jan), for Reid Hillview to
visit
with relatives in San Jose. On Wednesday morning 11:00 am we took off for
Half
Moon Bay for some of the crab Jim had recommended. San Jose Int'l Tower
directed us straight across midfield and asked us if we had the 737 in
sight on
downwind. As soon as we crossed the little ridge of mountians by the
coast we
were above a solid layer of overcast marine layer at 2500'. We decided to
carry
onto Half Moon Bay, but couldn't land due to the cloud cover. In fact if
it
wasn't for the GPS, I had no idea where we were. We told San Jose that we
would
carry on to the Golden Gate Bridge. No problem. Once there I could just
make
out the Bridge below and Alcatraz was clear, so we slipped down through a
hole
and flew over the Bridge at 1200', circled Alcatraz a couple of times and
took
lots of pictures of Frisco. What a blast! After that we carried onto
Redding
and homeward bound.
Thanks again to everyone for making our stay one to remember for a
lifetime. I
highly recommend that anyone who hasn't yet attended this fly-in to do so
next
year!

Rene & Melinda
Q2 C-FBWV



---------------------------------
Find your next car at Yahoo! Canada Autos






Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org





SPONSORED LINKS Aviation Quickie Recreation
Sports Aviation school Outdoor recreation


----------------------------------------------------------------------------
--
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.


----------------------------------------------------------------------------
--







Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____







Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
&k=Aviation&w1=Aviation&w2=Quickie&w3=Recr
eation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=d6L
bAnVGd0FLDuW5XKtTDg>

Quickie
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
&k=Quickie&w1=Aviation&w2=Quickie&w3=Recre
ation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=-5wj
zf-_G4rEBW55NEEc-w>

Recreation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
&k=Recreation&w1=Aviation&w2=Quickie&w3=Re
creation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=2
7E58bDl5ZcYMxljxO6B8A>


Sports
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
&k=Sports&w1=Aviation&w2=Quickie&w3=Recrea
tion&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.sig=rWpug
cCFs__v2Z71KYSvDA>

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+school&w1=Aviation&w2=Quickie&
&k=Aviation+school&w1=Aviation&w2=Quickie&
w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=100&.
sig=8vrvG63uw5awQqbMB-wYDw> school

Outdoor
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Outdoor+recreation&w1=Aviation&w2=Quick
&k=Outdoor+recreation&w1=Aviation&w2=Quick
ie&w3=Recreation&w4=Sports&w5=Aviation+school&w6=Outdoor+recreation&c=6&s=10
0&.sig=43KWAXWSoypULtHANABYnQ> recreation



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____