Date   

Re: Charlie Johnson & Tailwheels

Sam Hoskins <shoskins@...>
 

Thanks, Charlie. That is precisely what I was looking for.

Sam



_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
oneskydog@aol.com
Sent: Monday, October 03, 2005 8:47 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST] Charlie Johnson & Tailwheels

In a message dated 10/1/2005 3:32:57 AM Mountain Standard Time,
shoskins@mchsi.com writes:

Hi Charlie - I found that web site you told me about at www.darcor.com
<http://www.darcor.com/>

They have a lot of wheels. Which line contains the tailwheels you use?

Thanks

Sam Hoskins




.
Sam,

The wheels I have used are the 60 series. If you only want the wheel, like
we do general part number is. ref pg 3 general catolog

W-BC-EF

Where: W means wheel, B is load range, C is wheel diameter, E is bearing
type, and F is tread.

The one on Jeffs plane is a W-64-XD
Where: W means wheel, 6 is load range 175 to 400 lbs, 4 is wheel diameter,
X
is ball bearing , and D is neoprene tread.


The one on my plane is a W-65-PD
Where: W means wheel, 6 is load range 175 to 400 lbs, 5 is wheel diameter,
P
is precision sealed ball bearing , and D is neoprene tread.


I hope this helps.
Regards,
One Sky Dog










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance&w1=Aviation+mainte
nance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Av
iation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=NYqbfr
CRSu-_RfVcTvi4nA> maintenance

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+training&w1=Aviati
on+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+scho
ols&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.s
ig=UheaD83XCnCASim3ftrZHw> maintenance training

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation+maintenance&w2=Avi
ation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+maint
enance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dx8FsS6KYgxHm3RuBm
YoSA>

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+art&w1=Aviation+maintenance&w2
=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+m
aintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dRTZGQXiIldZ3q
X6IHfOfQ> art



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.

* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____


Re: Wheel cam guys.

Doug Humble <hawkidoug@...>
 

Jim, All I could picture in my mind when I read your 1st post was this mini cam pointed, not out the canopy like most of us would do, but back at the pilot, who has this sh*t eaten grin on is face. The Pilot goes home and plays it back and doesn't think he looks so good, so he blames it on the resolution of the mini camera. But I thought you might get offended by that, so I wrote you about the pilot skill thing.

For some reason, I'm still picturing that damn grin. :)

Somewhere in the bowels of the US...

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974

----- Original Message -----
From: "Jim Patillo" <logistics_engineering@msn.com>
To: <Q-LIST@yahoogroups.com>
Sent: Monday, October 03, 2005 5:57 PM
Subject: [Q-LIST] Re: Wheel cam guys.


You bee funnie, HawkI. Things a little slow in the bowels of the US
today?

JP

P.S. It is the resolution! Bro

--- In Q-LIST@yahoogroups.com, "Doug Humble" <hawkidoug@c...> wrote:
Jim, it might not be a camera resolution problem. It takes a
steady hand
from a good pilot... like Paul Fisher. Maybe Paul could fly your
plane with
the mini cam attached to your bird sometime.

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "Jim Patillo" <logistics_engineering@m...>
To: <Q-LIST@yahoogroups.com>
Sent: Monday, October 03, 2005 4:30 PM
Subject: [Q-LIST] Re: Wheel cam guys.


David,

The small cameras we bought (Like Jon Finnley's) on ebay earlier
this
year had pretty lousy resolution. I tried one but shitcanned the
idea
until something better appears. Thats probably why you haven't
seen or
heard more about it. I've got one do you want it?

Regards,
Jim Patillo

"David J. Gall" <David@G...> wrote:
Anyone have an eBay link to the "original" wireless wheelcam
that
Jon Finley
found and that was talked about on this list last year?

Thanks,


David J. Gall




Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links






Re: Wheel cam guys.

Jim Patillo
 

You bee funnie, HawkI. Things a little slow in the bowels of the US
today?

JP

P.S. It is the resolution! Bro

--- In Q-LIST@yahoogroups.com, "Doug Humble" <hawkidoug@c...> wrote:
Jim, it might not be a camera resolution problem. It takes a
steady hand
from a good pilot... like Paul Fisher. Maybe Paul could fly your
plane with
the mini cam attached to your bird sometime.

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974
----- Original Message -----
From: "Jim Patillo" <logistics_engineering@m...>
To: <Q-LIST@yahoogroups.com>
Sent: Monday, October 03, 2005 4:30 PM
Subject: [Q-LIST] Re: Wheel cam guys.


David,

The small cameras we bought (Like Jon Finnley's) on ebay earlier
this
year had pretty lousy resolution. I tried one but shitcanned the
idea
until something better appears. Thats probably why you haven't
seen or
heard more about it. I've got one do you want it?

Regards,
Jim Patillo

"David J. Gall" <David@G...> wrote:
Anyone have an eBay link to the "original" wireless wheelcam
that
Jon Finley
found and that was talked about on this list last year?

Thanks,


David J. Gall




Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links







Re: Wheel cam guys.

Doug Humble <hawkidoug@...>
 

Jim, it might not be a camera resolution problem. It takes a steady hand from a good pilot... like Paul Fisher. Maybe Paul could fly your plane with the mini cam attached to your bird sometime.

Doug "Hawkeye" Humble
www.asignabove.net
Omaha NE
N25974

----- Original Message -----
From: "Jim Patillo" <logistics_engineering@msn.com>
To: <Q-LIST@yahoogroups.com>
Sent: Monday, October 03, 2005 4:30 PM
Subject: [Q-LIST] Re: Wheel cam guys.


David,

The small cameras we bought (Like Jon Finnley's) on ebay earlier this
year had pretty lousy resolution. I tried one but shitcanned the idea
until something better appears. Thats probably why you haven't seen or
heard more about it. I've got one do you want it?

Regards,
Jim Patillo

"David J. Gall" <David@G...> wrote:
Anyone have an eBay link to the "original" wireless wheelcam that
Jon Finley
found and that was talked about on this list last year?

Thanks,


David J. Gall




Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links







Re: Charlie Johnson & Tailwheels

One Sky Dog
 

In a message dated 10/1/2005 3:32:57 AM Mountain Standard Time,
shoskins@mchsi.com writes:

Hi Charlie - I found that web site you told me about at www.darcor.com
<http://www.darcor.com/>

They have a lot of wheels. Which line contains the tailwheels you use?

Thanks

Sam Hoskins




.
Sam,

The wheels I have used are the 60 series. If you only want the wheel, like
we do general part number is. ref pg 3 general catolog

W-BC-EF

Where: W means wheel, B is load range, C is wheel diameter, E is bearing
type, and F is tread.

The one on Jeffs plane is a W-64-XD
Where: W means wheel, 6 is load range 175 to 400 lbs, 4 is wheel diameter, X
is ball bearing , and D is neoprene tread.


The one on my plane is a W-65-PD
Where: W means wheel, 6 is load range 175 to 400 lbs, 5 is wheel diameter, P
is precision sealed ball bearing , and D is neoprene tread.


I hope this helps.
Regards,
One Sky Dog


Re: Wheel cam guys.

Jim Patillo
 

David,

The small cameras we bought (Like Jon Finnley's) on ebay earlier this
year had pretty lousy resolution. I tried one but shitcanned the idea
until something better appears. Thats probably why you haven't seen or
heard more about it. I've got one do you want it?

Regards,
Jim Patillo

"David J. Gall" <David@G...> wrote:
Anyone have an eBay link to the "original" wireless wheelcam that
Jon Finley
found and that was talked about on this list last year?

Thanks,


David J. Gall


Re: Wheel cam guys.

David J. Gall
 

Anyone have an eBay link to the "original" wireless wheelcam that Jon Finley
found and that was talked about on this list last year?

Thanks,


David J. Gall


Re: Wheel cam guys.

Larry Hamm <LDHAMM@...>
 

Mike,
It might be a good deal, but check the "0" feedback, and the shipper is in Hong Kong. And the shipping and insurance is more than the camera. I'd wait 'til his feedback hit 30 or 40 before I'd buy. Let us know how it works out if you get one.
Larry Hamm

Mike Dwyer wrote:

Hey you wheel cam guys, check out this Digital Camcorder on Ebay for
around $80. They got a bunch of them so search for DV182F DIGITAL
CAMCORDER. I'd like a little higher resolution but this thing sure is
small and would make a great wheel camera!


(No subject)

damiantwinsport@...
 

Ron right you are ! once you got out that chop saw you were commited ... or should have been lol naw just kidding I think it will all be worth it. Send me your mailing address and I will shoot off those pipes to you.

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sun, 2 Oct 2005 15:58:08 -0700
Subject: RE: [Q-LIST]


Thanks Damian. Now I can make the new exhaust system 4 into one. Guess I
will have to shorten the oil tank also to gain some more space. Wonder if
anyone has made one out of carbon fibre, the temp the oil gets should not
hurt the tank. Need to do some more checking on that though. Had a good day
on the plenums, Last thing I did today was to foam up the both cowlings. By
next week I can form them around the plenums. This turned into more work
than I wanted to do. Can't stop now though.

Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Sunday, October 02, 2005 9:45 AM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST]



Ron,the nipples are fine the headers are held on with springs. On the front
left after the nipple the bend is crushed in a bit. The exhaust exit is
smashed a bit too. If you want them like I said you can have them. Just send
me a check for shipping after you get them .

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 1 Oct 2005 19:21:21 -0700
Subject: RE: [Q-LIST]


Damian, are the ones you have with the flange and the short piece of 1.5"
pipe is crushed? Is the flange straight and reusable? Or is this the whole
0200 exhaust you are talking about. If the flanges are reusable let me know
if you take paypal and I will send you money for the parts and shipping.

Thanks



Ron T

Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Saturday, October 01, 2005 3:02 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST]



Ron, I have my crushed ones (only on the bottom they are yours if you want
em.

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Cc: Q-200_Engine_Group@yahoogroups.com; Q-Performance@yahoogroups.com
Sent: Fri, 30 Sep 2005 16:10:59 -0700
Subject: [Q-LIST]


Hi all, does anyone have in their Q pile leftovers 2 - 0200 exhaust flanges
with the short piece of 1.5" diameter pipe on it. My exhaust had 2 on the
pipes that were on the engine and I need 2 more, I am making a new set of
pipes that will go 4 into 1 out the center, once I get this done I will
have a set of stock pipes for the 0200 that have just been ceramic coated
left over.

Still dancing, one step forward and two steps backward.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance&w1=Aviation+mainte
&k=Aviation+maintenance&w1=Aviation+mainte
nance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Av
iation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=NYqbfr
CRSu-_RfVcTvi4nA> maintenance

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+training&w1=Aviati
&k=Aviation+maintenance+training&w1=Aviati
on+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+scho
ols&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.s
ig=UheaD83XCnCASim3ftrZHw> maintenance training

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation+maintenance&w2=Avi
&k=Aviation&w1=Aviation+maintenance&w2=Avi
ation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+maint
enance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dx8FsS6KYgxHm3RuBm
YoSA>

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+art&w1=Aviation+maintenance&w2
&k=Aviation+art&w1=Aviation+maintenance&w2
=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+m
aintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dRTZGQXiIldZ3q
X6IHfOfQ> art



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


(No subject)

Ron <rondefly@...>
 

Thanks Damian. Now I can make the new exhaust system 4 into one. Guess I
will have to shorten the oil tank also to gain some more space. Wonder if
anyone has made one out of carbon fibre, the temp the oil gets should not
hurt the tank. Need to do some more checking on that though. Had a good day
on the plenums, Last thing I did today was to foam up the both cowlings. By
next week I can form them around the plenums. This turned into more work
than I wanted to do. Can't stop now though.

Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Sunday, October 02, 2005 9:45 AM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST]



Ron,the nipples are fine the headers are held on with springs. On the front
left after the nipple the bend is crushed in a bit. The exhaust exit is
smashed a bit too. If you want them like I said you can have them. Just send
me a check for shipping after you get them .

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 1 Oct 2005 19:21:21 -0700
Subject: RE: [Q-LIST]


Damian, are the ones you have with the flange and the short piece of 1.5"
pipe is crushed? Is the flange straight and reusable? Or is this the whole
0200 exhaust you are talking about. If the flanges are reusable let me know
if you take paypal and I will send you money for the parts and shipping.

Thanks



Ron T

Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Saturday, October 01, 2005 3:02 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST]



Ron, I have my crushed ones (only on the bottom they are yours if you want
em.

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Cc: Q-200_Engine_Group@yahoogroups.com; Q-Performance@yahoogroups.com
Sent: Fri, 30 Sep 2005 16:10:59 -0700
Subject: [Q-LIST]


Hi all, does anyone have in their Q pile leftovers 2 - 0200 exhaust flanges
with the short piece of 1.5" diameter pipe on it. My exhaust had 2 on the
pipes that were on the engine and I need 2 more, I am making a new set of
pipes that will go 4 into 1 out the center, once I get this done I will
have a set of stock pipes for the 0200 that have just been ceramic coated
left over.

Still dancing, one step forward and two steps backward.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance&w1=Aviation+mainte
&k=Aviation+maintenance&w1=Aviation+mainte
nance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Av
iation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=NYqbfr
CRSu-_RfVcTvi4nA> maintenance

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+training&w1=Aviati
&k=Aviation+maintenance+training&w1=Aviati
on+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+scho
ols&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.s
ig=UheaD83XCnCASim3ftrZHw> maintenance training

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools


Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation+maintenance&w2=Avi
&k=Aviation&w1=Aviation+maintenance&w2=Avi
ation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+maint
enance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dx8FsS6KYgxHm3RuBm
YoSA>

Aviation
<http://groups.yahoo.com/gads?t=ms
<http://groups.yahoo.com/gads?t=ms&k=Aviation+art&w1=Aviation+maintenance&w2
&k=Aviation+art&w1=Aviation+maintenance&w2
=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+m
aintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dRTZGQXiIldZ3q
X6IHfOfQ> art



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____


Wheel cam guys.

Mike Dwyer <mdwyer@...>
 

Hey you wheel cam guys, check out this Digital Camcorder on Ebay for
around $80. They got a bunch of them so search for DV182F DIGITAL
CAMCORDER. I'd like a little higher resolution but this thing sure is
small and would make a great wheel camera!

Mike Q200 N3QP


(No subject)

damiantwinsport@...
 

Ron,the nipples are fine the headers are held on with springs. On the front left after the nipple the bend is crushed in a bit. The exhaust exit is smashed a bit too. If you want them like I said you can have them. Just send me a check for shipping after you get them .

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Sent: Sat, 1 Oct 2005 19:21:21 -0700
Subject: RE: [Q-LIST]


Damian, are the ones you have with the flange and the short piece of 1.5"
pipe is crushed? Is the flange straight and reusable? Or is this the whole
0200 exhaust you are talking about. If the flanges are reusable let me know
if you take paypal and I will send you money for the parts and shipping.

Thanks



Ron T

Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Saturday, October 01, 2005 3:02 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST]



Ron, I have my crushed ones (only on the bottom they are yours if you want
em.

Regards,
Damian Gregory N8427 Q200


-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Cc: Q-200_Engine_Group@yahoogroups.com; Q-Performance@yahoogroups.com
Sent: Fri, 30 Sep 2005 16:10:59 -0700
Subject: [Q-LIST]


Hi all, does anyone have in their Q pile leftovers 2 - 0200 exhaust flanges
with the short piece of 1.5" diameter pipe on it. My exhaust had 2 on the
pipes that were on the engine and I need 2 more, I am making a new set of
pipes that will go 4 into 1 out the center, once I get this done I will
have a set of stock pipes for the 0200 that have just been ceramic coated
left over.

Still dancing, one step forward and two steps backward.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance&w1=Aviation+mainte
nance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Av
iation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=NYqbfr
CRSu-_RfVcTvi4nA> maintenance

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+training&w1=Aviati
on+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+scho
ols&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.s
ig=UheaD83XCnCASim3ftrZHw> maintenance training

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation+maintenance&w2=Avi
ation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+maint
enance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dx8FsS6KYgxHm3RuBm
YoSA>

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+art&w1=Aviation+maintenance&w2
=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+m
aintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dRTZGQXiIldZ3q
X6IHfOfQ> art



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____








Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


(No subject)

Ron <rondefly@...>
 

Damian, are the ones you have with the flange and the short piece of 1.5"
pipe is crushed? Is the flange straight and reusable? Or is this the whole
0200 exhaust you are talking about. If the flanges are reusable let me know
if you take paypal and I will send you money for the parts and shipping.

Thanks



Ron T

Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html

_____

From: Q-LIST@yahoogroups.com [mailto:Q-LIST@yahoogroups.com] On Behalf Of
damiantwinsport@aol.com
Sent: Saturday, October 01, 2005 3:02 PM
To: Q-LIST@yahoogroups.com
Subject: Re: [Q-LIST]



Ron, I have my crushed ones (only on the bottom they are yours if you want
em.

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Cc: Q-200_Engine_Group@yahoogroups.com; Q-Performance@yahoogroups.com
Sent: Fri, 30 Sep 2005 16:10:59 -0700
Subject: [Q-LIST]


Hi all, does anyone have in their Q pile leftovers 2 - 0200 exhaust flanges
with the short piece of 1.5" diameter pipe on it. My exhaust had 2 on the
pipes that were on the engine and I need 2 more, I am making a new set of
pipes that will go 4 into 1 out the center, once I get this done I will
have a set of stock pipes for the 0200 that have just been ceramic coated
left over.

Still dancing, one step forward and two steps backward.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links










Quickie Builders Association WEB site
http://www.quickiebuilders.org






SPONSORED LINKS


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance&w1=Aviation+mainte
nance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Av
iation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=NYqbfr
CRSu-_RfVcTvi4nA> maintenance

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+training&w1=Aviati
on+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+scho
ols&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.s
ig=UheaD83XCnCASim3ftrZHw> maintenance training

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools


Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+maintenance+schools&w1=Aviatio
n+maintenance&w2=Aviation+maintenance+training&w3=Aviation+maintenance+schoo
ls&w4=Aviation+maintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.si
g=aX8ElLSzXlWeeJ4RuRL4kw> maintenance schools

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation&w1=Aviation+maintenance&w2=Avi
ation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+maint
enance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dx8FsS6KYgxHm3RuBm
YoSA>

Aviation
<http://groups.yahoo.com/gads?t=ms&k=Aviation+art&w1=Aviation+maintenance&w2
=Aviation+maintenance+training&w3=Aviation+maintenance+schools&w4=Aviation+m
aintenance+schools&w5=Aviation&w6=Aviation+art&c=6&s=161&.sig=dRTZGQXiIldZ3q
X6IHfOfQ> art



_____

YAHOO! GROUPS LINKS



* Visit your group "Q-LIST <http://groups.yahoo.com/group/Q-LIST> "
on the web.


* To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com
<mailto:Q-LIST-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



_____


(No subject)

damiantwinsport@...
 

Ron, I have my crushed ones (only on the bottom they are yours if you want em.

Regards,
Damian Gregory N8427 Q200

-----Original Message-----
From: Ron <rondefly@rtriano.com>
To: Q-LIST@yahoogroups.com
Cc: Q-200_Engine_Group@yahoogroups.com; Q-Performance@yahoogroups.com
Sent: Fri, 30 Sep 2005 16:10:59 -0700
Subject: [Q-LIST]


Hi all, does anyone have in their Q pile leftovers 2 - 0200 exhaust flanges
with the short piece of 1.5" diameter pipe on it. My exhaust had 2 on the
pipes that were on the engine and I need 2 more, I am making a new set of
pipes that will go 4 into 1 out the center, once I get this done I will
have a set of stock pipes for the 0200 that have just been ceramic coated
left over.

Still dancing, one step forward and two steps backward.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html










Quickie Builders Association WEB site
http://www.quickiebuilders.org


Yahoo! Groups Links


Charlie Johnson & Tailwheels

Sam Hoskins <shoskins@...>
 

Hi Charlie - I found that web site you told me about at www.darcor.com
<http://www.darcor.com/>

They have a lot of wheels. Which line contains the tailwheels you use?

Thanks

Sam Hoskins


(No subject)

Ron <rondefly@...>
 

Hi all, does anyone have in their Q pile leftovers 2 - 0200 exhaust flanges
with the short piece of 1.5" diameter pipe on it. My exhaust had 2 on the
pipes that were on the engine and I need 2 more, I am making a new set of
pipes that will go 4 into 1 out the center, once I get this done I will
have a set of stock pipes for the 0200 that have just been ceramic coated
left over.

Still dancing, one step forward and two steps backward.



Ron T



Ron's Quickies, Page 8 is the Q200 and 9 is the Quickie
http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page8.html

http://bld01.ipowerweb.com/contentmanagement/websites/rtrianoc/page9.html


SAA

Patrick Panzera <panzera@...>
 

I'm sorry if you receive multiple copies of this, as I'm sending this out to
every e-mail list I belong to.

I BEG that you do likewise, as there is a real concern here. This is not spam
nor any form of chain letter.



I belong to several Experimental Aviation e-mail lists and have, throughout the
years, heard a common complaint that the the EAA is not supporting Experimental
Aviation like we would expect it to.



But there is another organization out there, the SAA, that IS doing as EAA use
to do. Like the EAA, the SAA was founded by Paul Poberezny (who is currently the
President), and is a "grass roots" experimental aviation resource.



http://www.sportaviation.org/



Over the past weekend I heard a rumor that they might be shutting down, due to
lack of interest.



I sent them an e-mail and here's part of the reply:

(my question was specific to renewal)



"The Board will be meeting next month to determine the future direction of the
organization. Until that final decision has been made, we have elected not to
accept any renewals for 2006."



So if I may be so bold, it's time for us to collectively to PUT-UP OR SHUT THE
HECK UP!



If you are a current member, please send a letter of support and recruit 5 new
members, today!



If you are NOT a member, then BECOME ONE!!! RIGHT NOW!!! There's no excuse.



The infrastructure is in place. The staff is on-board. Everything is in place
for the SAA to be everything you want or need it to be. The ONLY thing lacking
is YOUR SUPPORT!.



Without your support, SAA may be gone, soon. Although I'm a loyal member of the
EAA and feel that the direction they are taking is beneficial to general
aviation as well as sport aviation and SP/LSA (and they certainly have my
support with all of that), their return to grass-roots Experimental Aviation is
just not going to happen, no matter how many letters we send.



If we want to belong to an organization that's dedicated to people like you,
building stuff with your own hands, in your own garage, even if it's just
dreaming about taking on such a project, it's time to stop complaining about the
EAA and actually DO SOMETHING!!!



Pat


Re: test

Paul Buckley
 

Thanks Jim, you guys have been rather quiet over the last few days and I was wondering if my mail was bouncing......... again.

Paul

----- Original Message -----
From: Jim Patillo
To: Q-LIST@yahoogroups.com
Sent: Thursday, September 29, 2005 11:32 PM
Subject: [Q-LIST] Re: test



Loud and clear in San Francisco Bay Area.

Jim P

--- In Q-LIST@yahoogroups.com, "Paul Buckley" <paulbuckley@o...> wrote:
>
> Paul
>
>





Quickie Builders Association WEB site
http://www.quickiebuilders.org





------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "Q-LIST" on the web.

b.. To unsubscribe from this group, send an email to:
Q-LIST-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------


Re: test

Jim Patillo
 

Loud and clear in San Francisco Bay Area.

Jim P

--- In Q-LIST@yahoogroups.com, "Paul Buckley" <paulbuckley@o...> wrote:

Paul


test

Paul Buckley
 

Paul