Date   

Spring Fling

Kevin Boddicker
 

Listers,
I will once again host the Tandem Wing Spring Fling in DEH. I am looking at May 6, 7, 8.
Anybody have a conflict with that? Please speak up as nothing is set in stone.
But this is a benevolent dictatorship, so the majority CAN be overruled. :>))))
Hope to get a date set and Dan will put info up on the Q web site.
More details later.



Kevin Boddicker
TriQ 200 N7868B 194 hrs
Luana, IA.


Trailer configuration

Martin Skiby
 

Can anyone tell me if a Q200 will fit on a trailer and be legal for transport across the nation? (with the tail removed or course) I know it was a real issue for the triQ with the motor on, but have no experience with the standard configuration.

Thanks


Shirt info

Darrell Daniels <log@...>
 

Thanks Guys,. I am going to play with the photos and the wings Paul sent me and see what looks best. If you all like when I get done I will post it for inspection.
When Choose the design for my leg I was standing there with the leg of my pants zipped off holding design;'s up against it to see what would look good. Ended up six strangers got in on the act and helped me with the choice. It turned out great and we all had fun. I will get a pic and post it if anyone is interested. Sorry to be off topic. Darrell


Re: photo or shirt

Martin Skiby
 

I just added one to my photo album. Found it on the net.

--- In Q-LIST@..., dan@... wrote:

Darrell,
John Loram has a very small version of the 3/4 view on his homepage:

http://www.loram.org/

Not sure if he has a bigger version for you if you need it. Just FYI.

John, are you in here? :-)

Cheers,
Dan Yager
QBA Editor
www.quickheads.com




Thanks Pat but I think you are correct the three quarter view would look
better. Darrell
----- Original Message -----
From: "Pat Panzera" <panzera@...>
To: <Q-LIST@...>
Sent: Friday, January 14, 2011 10:36 PM
Subject: Re: [Q-LIST] photo or shirt


I don't have it handy or I'd send it, but maybe someone else has it
handy.

The 3/4 view of the fluid dynamic coloring of the Q might look pretty
slick.
A quick Google for it turned up this image, but it's only a side-view,
not
the 3/4 view.

http://www.finleyweb.net/JonsStuff/Q2AircraftInfo/EJ22Conversion/CoolingSystemDesign.aspx
Scroll to the bottom.

Pat

On Fri, Jan 14, 2011 at 8:09 PM, DDaniels <log@...> wrote:

Guys I have an unusual request. I am having another leg socket made
for
my
second foot . The first one has Harley egale on it with flames and a
scripture verse on it.. for the second I want a Quickie on it .
Problem
is
my airplane is not yet ready to take a photo of. I need a photo or a
shirt
that is black with a quickie on it. I could even have one embrodered on
a
shirt if I had the right photo to scan for it. Any help would be
appricated.
Thanks Darrell





------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links





[Non-text portions of this message have been removed]



------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links



Re: photo or shirt

quickheads
 

Darrell,
John Loram has a very small version of the 3/4 view on his homepage:

http://www.loram.org/

Not sure if he has a bigger version for you if you need it. Just FYI.

John, are you in here? :-)

Cheers,
Dan Yager
QBA Editor
www.quickheads.com

Thanks Pat but I think you are correct the three quarter view would look
better. Darrell
----- Original Message -----
From: "Pat Panzera" <panzera@...>
To: <Q-LIST@...>
Sent: Friday, January 14, 2011 10:36 PM
Subject: Re: [Q-LIST] photo or shirt


I don't have it handy or I'd send it, but maybe someone else has it
handy.

The 3/4 view of the fluid dynamic coloring of the Q might look pretty
slick.
A quick Google for it turned up this image, but it's only a side-view,
not
the 3/4 view.

http://www.finleyweb.net/JonsStuff/Q2AircraftInfo/EJ22Conversion/CoolingSystemDesign.aspx
Scroll to the bottom.

Pat

On Fri, Jan 14, 2011 at 8:09 PM, DDaniels <log@...> wrote:

Guys I have an unusual request. I am having another leg socket made
for
my
second foot . The first one has Harley egale on it with flames and a
scripture verse on it.. for the second I want a Quickie on it .
Problem
is
my airplane is not yet ready to take a photo of. I need a photo or a
shirt
that is black with a quickie on it. I could even have one embrodered on
a
shirt if I had the right photo to scan for it. Any help would be
appricated.
Thanks Darrell





------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links









------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links



Re: Q1 Onan Engine Crankshaft Diameter

pilotyeager
 

Terry -


Thanks for the help. Mine is the 1 7/16". I found the following table:

http://www.smallenginewarehouse.com/OnanCrankshaft.asp


So, mine is the 45BE, which has the following specs:

Type Straight
Diameter 1.44
Total Shaft Length 3.99
Usable Shaft Length 3.06
Internal Thread 3/8-24
Shaft Feature 0.38 SQ Keyway

The other one that you refer to must be the 45BB, which has the following specs:

Type Straight
Diameter 1.12
Total Shaft Length 3.95
Usable Shaft Length 2.74
Internal Thread 3/8-24
Shaft Feature 0.25 SQ Keyway

I think the Keyway is pretty important, so I think the crankshaft options are limited to these two choices.

Cheers!

Robert

--- In Q-LIST@..., Q1terryMDT@... wrote:


The majority of them are 1.125 inches the very early ones were something
like 1 7/16, don't quote me on the early ones.

Terry

In a message dated 1/17/2011 7:13:37 A.M. Central Standard Time,
pilotyeager@... writes:

I am looking for the diameter of the Onan engine crankshaft - any help?

Robert





[Non-text portions of this message have been removed]


CF Spars needed

kennethhigdonpilot
 

I need Carbon Fiber Spars for my Q-200 project. Any here in the States, Southeast, Alabama, pan-handel of Florida? If not ! Could any one give me the Specks - length ?, demintions?, number of wrapps?,thickness?, diameter? - inner? and outter?.
Any help will be appreciated !
Kenneth Higdon - Q-200 Bldr
Tuscaloosa, AL / Gulf Shores, Alabama


Re: joining the group

John Brecher <jlbrecher@...>
 

I'm in Kyle, Tx and working on a Q1 with Cody.

On Mon, Jan 17, 2011 at 5:10 PM, <raoborg@...> wrote:



Welcome too but were are you and what Q are you working on!! Raoul

--- fibrejoe@... <fibrejoe%40yahoo.com> wrote:

From: fibrejoe@... <fibrejoe%40yahoo.com>
To: Q-LIST@... <Q-LIST%40yahoogroups.com>
Subject: [Q-LIST] Re: joining the group
Date: Mon, 17 Jan 2011 11:48:11 -0800 (PST)

Welcome John! Glad to have you as a member.

- Cody






[Non-text portions of this message have been removed]





__________________________________________________________
Netscape. Just the Net You Need.



--
John L. Brecher


[Non-text portions of this message have been removed]


Re: Q1 Onan Engine Crankshaft Diameter

Terry Crouch
 

The majority of them are 1.125 inches the very early ones were something
like 1 7/16, don't quote me on the early ones.

Terry

In a message dated 1/17/2011 7:13:37 A.M. Central Standard Time,
pilotyeager@... writes:

I am looking for the diameter of the Onan engine crankshaft - any help?

Robert


Re: joining the group

raoborg@...
 

Welcome too but were are you and what Q are you working on!! Raoul

--- fibrejoe@... wrote:

From: fibrejoe@...
To: Q-LIST@...
Subject: [Q-LIST] Re: joining the group
Date: Mon, 17 Jan 2011 11:48:11 -0800 (PST)

Welcome John!  Glad to have you as a member.

- Cody






[Non-text portions of this message have been removed]





_____________________________________________________________
Netscape. Just the Net You Need.


wireless camera

Webcave
 


Re: joining the group

Joe Walshton
 

Welcome John!  Glad to have you as a member.

- Cody






[Non-text portions of this message have been removed]


Re: Video - Top of Tail

Jay Scheevel <scheevel@...>
 

Jon,

Is that why you moved to NM? So you could ask the aliens in Roswell how to
put the plasma drive on your plane? :)

Looks like you are holding left aileron to fly level. Normally I would
expect right aileron to fly level with single pilot. Is that what you are
referring to? Now I really want to measure your wings. Maybe I can get down
there this spring. Should be about 2.5 hours for me, but my plane is down
for annual right now.

Cheers,
Jay Scheevel - Tri-Q still building


Re: Video - Top of Tail

Mike Perry
 

Hello Sam, Jon:

Right Aileron is up -- but is he flying solo? If so might be the trim
needed?

Any Comments on Aileron trim vs. Elevator? Ease of installation,
forces, area, drag???

Thanks, Mike Perry

On 1/17/2011 5:27 AM, Sam Hoskins wrote:

{snip}
Judging by the right aileron, it looks like things are a little out of
rig.
Fix that and you might pick up a few MPHs.

Sam


N142BP

Martin Skiby
 

This plane is for sale on Barnstormers as a damaged plane. I was thinking about picking it up and getting it back in the air for my son to fly while we are building the Q200 as it is not that far from my house. Any one that may have info on this plane I would appriciate a heads up.

Questions in my mind are, If this is an LS canard as stated, would it also have counter balanced control surfaces? Any conerns about putting the wheel back on other than the added weight on one side for the repair?

Does any one have an opinion on the original construction. It looks pretty good from the photo's, but I have not been able to contact the seller at this point for a visit.

Thanks in advance.


joining the group

John Brecher <jlbrecher@...>
 

--
John L. Brecher


Re: Video - Top of Tail

Brad Boyd <them_beans@...>
 

Dick,
Where are you located? My Q2 has generated a lot of interest at my small airport (N57) and if you're not on the Left Coast, you may get some calls.
Brad

B W Boyd
N11FK Q2
Wilmington, DE
302-377-4479

On Jan 16, 2011, at 14:33, FR Jones <seabeevet@...> wrote:

Very enjoyable! Thanks for that!
I'm trying to sell my SuperQuickie. If you hear of anyone interested let me
know. Rotax 503 needs work and a paint job, she is as good as new.
Dick

On Sun, Jan 16, 2011 at 11:10 AM, Jon Finley <jon@...> wrote:




Hi all,

My video camera (mounted on top of the tail) finally worked this past
Friday. Neither the footage or flying is all that great but it is something.
I also see some "issues" with my plane that I need to work on as a result of
this footage.

The two most recent videos here:
[http://www.vimeo.com/user2947046/videos]
http://www.vimeo.com/user2947046/videos
Jon Finley
N314JF - Q2 - Subaru EJ-22
[http://www.finleyweb.net/Q2Subaru.aspx]
http://www.finleyweb.net/Q2Subaru.aspx
P.S. No audio on either of these vids.









------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links



Re: photo or shirt

Gérard Rouleau <geair@...>
 

Darrell,
I have something that looks like a 3/4 view of the fluid dynamic of the Q. Send me a note to geair@... and I'll send you the picture.
Valid to anybody else who wants it.

Have a nice day,
Gerard


From: Darrell Daniels
Sent: Monday, January 17, 2011 8:15 AM
To: Q-LIST@...
Subject: Re: [Q-LIST] photo or shirt



Thanks Pat but I think you are correct the three quarter view would look
better. Darrell


Re: Video - Top of Tail

Jon Finley <jon@...>
 

Hi Mike,

Picture of the picture taker attached - not positive that it will make it
thru.

I noted that my wide-angle lens also has some magnification. It would be a
better picture without that magnification.

Jon

-----Original Message-----
From: Q-LIST@... [mailto:Q-LIST@...] On Behalf
Of Mike D
Sent: Sunday, January 16, 2011 4:04 PM
To: q-list@...
Subject: RE: [Q-LIST] Video - Top of Tail


Cool deal Jon! Looks like your right aileron is a bit up. If this is
true you may try adjusting your elevators a bit so the ailerons are
neutral? Also, how did you mount to the tail? Looks like a pretty
good spot, better than I thought. Great job!
Mike Q200 N3QP


Re: Video - Top of Tail

Jon Finley <jon@...>
 

I don't know and I haven't had time to research it. I bet it is not a mystery to the videography crowd. May also have something to do with the wide-angle lens and/or lots of buffeting (air flow) and the camera is trying to deal with it.

You guys have spotted one of the problems, there is at least one more. However; I do not believe fixing the out of trim condition is so easy. Currently, the elevators are set such that there is (about) no roll at cruise. I have not yet had time to thoroughly contemplate this issue but factors at work during that flight were a pretty good wind from port (west/left side while cruising) and that big 'ole camera taped to the top/left of the tail.

Jon

-----Original Message-----
From: "Sam Hoskins" <sam.hoskins@...>
Sent: Monday, January 17, 2011 6:27am
To: "Q-LIST" <Q-LIST@...>
Subject: Re: [Q-LIST] Video - Top of Tail

I don't think it's the fuselage vibrating, I think it's a characteristic of
the digital camera.

At 3:39 you can see the shadow of the camera sweep across the turtle deck.

Judging by the right aileron, it looks like things are a little out of rig.
Fix that and you might pick up a few MPHs.

Sam

On Sun, Jan 16, 2011 at 2:05 PM, Kevin Boddicker <trumanst@...>wrote:

Jon,
What is causing the sides of the fuselage to look like they are flexing on
final?
Neat video.
No flying since November! Been a bad flying winter so far.
Hope it straightens soon. I have little sanity left.

Kevin Boddicker
TriQ 200 N7868B 194 hrs
Luana, IA.



On Jan 16, 2011, at 11:10 AM, Jon Finley wrote:


Hi all,

My video camera (mounted on top of the tail) finally worked this past
Friday. Neither the footage or flying is all that great but it is something.
I also see some "issues" with my plane that I need to work on as a result of
this footage.

The two most recent videos here:
[http://www.vimeo.com/user2947046/videos]
http://www.vimeo.com/user2947046/videos
Jon Finley
N314JF - Q2 - Subaru EJ-22
[http://www.finleyweb.net/Q2Subaru.aspx]
http://www.finleyweb.net/Q2Subaru.aspx
P.S. No audio on either of these vids.









------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links








------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links

18581 - 18600 of 55798