Date   

Trailer

Larry Severson
 

I am currently home with Bronchitis. As a result I messed up. 3 people asked for trailer pictures. I sent them to Hawkdog and Martin, but I lost the other request.

Also, the trailer is currently empty. When I am able to get back to CNO, I will be able to get specific construction details pictures of the trailer. The person who built it had been planning to sell them, but he died in early 1985. It is definitely the only way to transport a Q2, unless you love frustration and hard work.

--
"Engineering is the art of doing well with one dollar which any bumbler can do with two, after a fashion.", Albert M. Wellington

Larry Severson
18242 Peters Ct
Fountain Valley
CA 92708
(714) 968-9852


Re: Trailer configuration - further

Martin Skiby
 

Sweet. That one sounds very cool.

--- In Q-LIST@..., larry severson <larry2@...> wrote:

My trailer was specifically designed for the Q2. The plane is rolled
into the trailer arms. The arms are then clamped onto the canard. The
tail is removed. The plane is then rotated upward exposing a rest
designed to hold the tail. Once the tail section has been clamped on,
the plane is ready to travel. It can take as little as 15 minutes to
load or off load the plane. The engine stays on.

On 1/20/2011 2:51 PM, Martin wrote:

Can anyone tell me if a Q200 will fit on a trailer and be legal for
transport across the nation? (with the tail removed or course) I know
it was a real issue for the triQ with the motor on, but have no
experience with the standard configuration.

Thanks
--
"Engineering is the art of doing well with one dollar which any bumbler can do with two, after a fashion.", Albert M. Wellington

Larry Severson
18242 Peters Ct
Fountain Valley
CA 92708
(714) 968-9852



[Non-text portions of this message have been removed]


Re: Spring Fling

Bruce Crain
 

Same old crap sounds familiar. Corporate doesn't fix problems they just keep whipping you thinking that will squeak out an extra shilling. But hey they paid me to keep doing it the same way for years and I applied for the job. So guess I am partly responsible. Sammy are you going to build another plane?
Bruce

---------- Original Message ----------
From: Sam Hoskins <sam.hoskins@...>
To: Q-LIST <Q-LIST@...>
Subject: Re: [Q-LIST] Spring Fling
Date: Fri, 21 Jan 2011 08:09:50 -0600

It is wonderful. Especially when I talk to folks at the company I used to
work for. I could walk in the door there and it would be the same old crap.



____________________________________________________________
Banks Forced to Forgive Credit Card Debt
Find Out How Much of Your Debt Can Be Erased.
http://thirdpartyoffers.juno.com/TGL3131/4d3996254eb49cc6388st03vuc


Re: Spring Fling

Sam Hoskins
 

It is wonderful. Especially when I talk to folks at the company I used to
work for. I could walk in the door there and it would be the same old crap.

On Fri, Jan 21, 2011 at 8:05 AM, jcrain2@... <jcrain2@...> wrote:



Will try to make it 'cause "Honey Lamb" still wants to meet your wife. They
will probably spend the time talking about us! I can't promise anything as I
have taken over the family farm on top of working at UPS. Sammy help me, how
did you get retireded? It sounds wonderful!Bruce
__________________________________________________________
Obama Urges Homeowners to Refinance
If you owe under $729k you probably qualify for Obama's Refi Program
http://thirdpartyoffers.juno.com/TGL3131/4d39930c604fad99926st01vuc





Re: Spring Fling

Bruce Crain
 

Will try to make it 'cause "Honey Lamb" still wants to meet your wife. They will probably spend the time talking about us! I can't promise anything as I have taken over the family farm on top of working at UPS. Sammy help me, how did you get retireded? It sounds wonderful!Bruce
____________________________________________________________
Obama Urges Homeowners to Refinance
If you owe under $729k you probably qualify for Obama's Refi Program
http://thirdpartyoffers.juno.com/TGL3131/4d39930c604fad99926st01vuc


Re: Spring Fling

Brett Gerber <bgerber@...>
 

Sounds good to me. Actually have that weekend off from our funeral home
and only about 315miles.





Brett Douglas Gerber

D.O. McComb and Sons Funeral Homes

(260) 426- 9494



From: Q-LIST@... [mailto:Q-LIST@...] On Behalf
Of Kevin Boddicker
Sent: Thursday, January 20, 2011 6:15 PM
To: Q-LIST@...
Cc: Dragonflylist@...
Subject: [Q-LIST] Spring Fling





Listers,
I will once again host the Tandem Wing Spring Fling in DEH. I am looking
at May 6, 7, 8.
Anybody have a conflict with that? Please speak up as nothing is set in
stone.
But this is a benevolent dictatorship, so the majority CAN be overruled.
:>))))
Hope to get a date set and Dan will put info up on the Q web site.
More details later.

Kevin Boddicker
TriQ 200 N7868B 194 hrs
Luana, IA.


Re: Trailer configuration - further

Larry Severson
 

My trailer was specifically designed for the Q2. The plane is rolled
into the trailer arms. The arms are then clamped onto the canard. The
tail is removed. The plane is then rotated upward exposing a rest
designed to hold the tail. Once the tail section has been clamped on,
the plane is ready to travel. It can take as little as 15 minutes to
load or off load the plane. The engine stays on.

On 1/20/2011 2:51 PM, Martin wrote:

Can anyone tell me if a Q200 will fit on a trailer and be legal for
transport across the nation? (with the tail removed or course) I know
it was a real issue for the triQ with the motor on, but have no
experience with the standard configuration.

Thanks
--
"Engineering is the art of doing well with one dollar which any bumbler can do with two, after a fashion.", Albert M. Wellington

Larry Severson
18242 Peters Ct
Fountain Valley
CA 92708
(714) 968-9852


Re: Trailer configuration

Larry Severson
 

Yes, I have one in my hanger. It has been used to transport Q2 planes
from both Oregon and Arizona to California. I have also transported a
triQ, but it was a hassle because the nose gear had to be removed first.
I am willing to sell or rent it. I can send a PDF with pictures on
planes on the trailer to anyone interested.

On 1/20/2011 2:51 PM, Martin wrote:

Can anyone tell me if a Q200 will fit on a trailer and be legal for
transport across the nation? (with the tail removed or course) I know
it was a real issue for the triQ with the motor on, but have no
experience with the standard configuration.

Thanks
--
"Engineering is the art of doing well with one dollar which any bumbler can do with two, after a fashion.", Albert M. Wellington

Larry Severson
18242 Peters Ct
Fountain Valley
CA 92708
(714) 968-9852


Re: Trailer configuration

Martin Skiby
 

Thanks

--- In Q-LIST@..., DUG <q2@...> wrote:

here is a link to when we moved my triQ from Illinois to Idaho, we had the motor
off...

http://www.cactusgrass.com/N56DWRoadTrip

DUG
(Doug Tenney)
Boise, ID
N56DW





________________________________
From: Martin <mskiby@...>
To: Q-LIST@...
Sent: Thu, January 20, 2011 3:51:01 PM
Subject: [Q-LIST] Trailer configuration


Can anyone tell me if a Q200 will fit on a trailer and be legal for transport
across the nation? (with the tail removed or course) I know it was a real issue
for the triQ with the motor on, but have no experience with the standard
configuration.

Thanks




[Non-text portions of this message have been removed]


Re: Trailer configuration

Martin Skiby
 

US

--- In Q-LIST@..., "Mick Davies" <mickdavies@...> wrote:

UK or US?
In the UK with the engine on and the boss but not the prop it's about 2
inches over. The Cops wouldn't know the legalities so I trailered mine OK.
mick

----- Original Message -----
From: "Martin" <mskiby@...>
To: <Q-LIST@...>
Sent: Thursday, January 20, 2011 10:51 PM
Subject: [Q-LIST] Trailer configuration


Can anyone tell me if a Q200 will fit on a trailer and be legal for
transport across the nation? (with the tail removed or course) I know it
was a real issue for the triQ with the motor on, but have no experience
with the standard configuration.

Thanks



------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links






-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3392 - Release Date: 01/20/11


Re: Trailer configuration

Doug Tenney
 

here is a link to when we moved my triQ from Illinois to Idaho, we had the motor
off...

http://www.cactusgrass.com/N56DWRoadTrip

DUG
(Doug Tenney)
Boise, ID
N56DW





________________________________
From: Martin <mskiby@...>
To: Q-LIST@...
Sent: Thu, January 20, 2011 3:51:01 PM
Subject: [Q-LIST] Trailer configuration


Can anyone tell me if a Q200 will fit on a trailer and be legal for transport
across the nation? (with the tail removed or course) I know it was a real issue
for the triQ with the motor on, but have no experience with the standard
configuration.

Thanks


Re: Trailer configuration

Mick Davies <mickdavies@...>
 

UK or US?
In the UK with the engine on and the boss but not the prop it's about 2 inches over. The Cops wouldn't know the legalities so I trailered mine OK.
mick

----- Original Message -----
From: "Martin" <mskiby@...>
To: <Q-LIST@...>
Sent: Thursday, January 20, 2011 10:51 PM
Subject: [Q-LIST] Trailer configuration


Can anyone tell me if a Q200 will fit on a trailer and be legal for transport across the nation? (with the tail removed or course) I know it was a real issue for the triQ with the motor on, but have no experience with the standard configuration.

Thanks



------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links






-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1191 / Virus Database: 1435/3392 - Release Date: 01/20/11


Re: Trailer configuration

Mike Perry
 

With the motor off, rear slightly raised, Q2 or Q200 fits easily within
the 8' 6" (102 inch) US national standard. The national standard is for
commercial vehicles but I don't think any state limits private vehicle
width to less than this.

I believe some people have moved Qs short distances with the motor on by
raising the rear of the fuselage high in the air.

Mike Perry

On 1/20/2011 2:51 PM, Martin wrote:

Can anyone tell me if a Q200 will fit on a trailer and be legal for
transport across the nation? (with the tail removed or course) I know
it was a real issue for the triQ with the motor on, but have no
experience with the standard configuration.

Thanks


Spring Fling

Kevin Boddicker
 

Listers,
I will once again host the Tandem Wing Spring Fling in DEH. I am looking at May 6, 7, 8.
Anybody have a conflict with that? Please speak up as nothing is set in stone.
But this is a benevolent dictatorship, so the majority CAN be overruled. :>))))
Hope to get a date set and Dan will put info up on the Q web site.
More details later.



Kevin Boddicker
TriQ 200 N7868B 194 hrs
Luana, IA.


Trailer configuration

Martin Skiby
 

Can anyone tell me if a Q200 will fit on a trailer and be legal for transport across the nation? (with the tail removed or course) I know it was a real issue for the triQ with the motor on, but have no experience with the standard configuration.

Thanks


Shirt info

Darrell Daniels <log@...>
 

Thanks Guys,. I am going to play with the photos and the wings Paul sent me and see what looks best. If you all like when I get done I will post it for inspection.
When Choose the design for my leg I was standing there with the leg of my pants zipped off holding design;'s up against it to see what would look good. Ended up six strangers got in on the act and helped me with the choice. It turned out great and we all had fun. I will get a pic and post it if anyone is interested. Sorry to be off topic. Darrell


Re: photo or shirt

Martin Skiby
 

I just added one to my photo album. Found it on the net.

--- In Q-LIST@..., dan@... wrote:

Darrell,
John Loram has a very small version of the 3/4 view on his homepage:

http://www.loram.org/

Not sure if he has a bigger version for you if you need it. Just FYI.

John, are you in here? :-)

Cheers,
Dan Yager
QBA Editor
www.quickheads.com




Thanks Pat but I think you are correct the three quarter view would look
better. Darrell
----- Original Message -----
From: "Pat Panzera" <panzera@...>
To: <Q-LIST@...>
Sent: Friday, January 14, 2011 10:36 PM
Subject: Re: [Q-LIST] photo or shirt


I don't have it handy or I'd send it, but maybe someone else has it
handy.

The 3/4 view of the fluid dynamic coloring of the Q might look pretty
slick.
A quick Google for it turned up this image, but it's only a side-view,
not
the 3/4 view.

http://www.finleyweb.net/JonsStuff/Q2AircraftInfo/EJ22Conversion/CoolingSystemDesign.aspx
Scroll to the bottom.

Pat

On Fri, Jan 14, 2011 at 8:09 PM, DDaniels <log@...> wrote:

Guys I have an unusual request. I am having another leg socket made
for
my
second foot . The first one has Harley egale on it with flames and a
scripture verse on it.. for the second I want a Quickie on it .
Problem
is
my airplane is not yet ready to take a photo of. I need a photo or a
shirt
that is black with a quickie on it. I could even have one embrodered on
a
shirt if I had the right photo to scan for it. Any help would be
appricated.
Thanks Darrell





------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links





[Non-text portions of this message have been removed]



------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links



Re: photo or shirt

quickheads
 

Darrell,
John Loram has a very small version of the 3/4 view on his homepage:

http://www.loram.org/

Not sure if he has a bigger version for you if you need it. Just FYI.

John, are you in here? :-)

Cheers,
Dan Yager
QBA Editor
www.quickheads.com

Thanks Pat but I think you are correct the three quarter view would look
better. Darrell
----- Original Message -----
From: "Pat Panzera" <panzera@...>
To: <Q-LIST@...>
Sent: Friday, January 14, 2011 10:36 PM
Subject: Re: [Q-LIST] photo or shirt


I don't have it handy or I'd send it, but maybe someone else has it
handy.

The 3/4 view of the fluid dynamic coloring of the Q might look pretty
slick.
A quick Google for it turned up this image, but it's only a side-view,
not
the 3/4 view.

http://www.finleyweb.net/JonsStuff/Q2AircraftInfo/EJ22Conversion/CoolingSystemDesign.aspx
Scroll to the bottom.

Pat

On Fri, Jan 14, 2011 at 8:09 PM, DDaniels <log@...> wrote:

Guys I have an unusual request. I am having another leg socket made
for
my
second foot . The first one has Harley egale on it with flames and a
scripture verse on it.. for the second I want a Quickie on it .
Problem
is
my airplane is not yet ready to take a photo of. I need a photo or a
shirt
that is black with a quickie on it. I could even have one embrodered on
a
shirt if I had the right photo to scan for it. Any help would be
appricated.
Thanks Darrell





------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links









------------------------------------

Quickie Builders Association WEB site
http://www.quickiebuilders.org

Yahoo! Groups Links



Re: Q1 Onan Engine Crankshaft Diameter

pilotyeager
 

Terry -


Thanks for the help. Mine is the 1 7/16". I found the following table:

http://www.smallenginewarehouse.com/OnanCrankshaft.asp


So, mine is the 45BE, which has the following specs:

Type Straight
Diameter 1.44
Total Shaft Length 3.99
Usable Shaft Length 3.06
Internal Thread 3/8-24
Shaft Feature 0.38 SQ Keyway

The other one that you refer to must be the 45BB, which has the following specs:

Type Straight
Diameter 1.12
Total Shaft Length 3.95
Usable Shaft Length 2.74
Internal Thread 3/8-24
Shaft Feature 0.25 SQ Keyway

I think the Keyway is pretty important, so I think the crankshaft options are limited to these two choices.

Cheers!

Robert

--- In Q-LIST@..., Q1terryMDT@... wrote:


The majority of them are 1.125 inches the very early ones were something
like 1 7/16, don't quote me on the early ones.

Terry

In a message dated 1/17/2011 7:13:37 A.M. Central Standard Time,
pilotyeager@... writes:

I am looking for the diameter of the Onan engine crankshaft - any help?

Robert





[Non-text portions of this message have been removed]


CF Spars needed

kennethhigdonpilot
 

I need Carbon Fiber Spars for my Q-200 project. Any here in the States, Southeast, Alabama, pan-handel of Florida? If not ! Could any one give me the Specks - length ?, demintions?, number of wrapps?,thickness?, diameter? - inner? and outter?.
Any help will be appreciated !
Kenneth Higdon - Q-200 Bldr
Tuscaloosa, AL / Gulf Shores, Alabama

18421 - 18440 of 55651