Date   
Re: Flight Report

Dragonfly Russell
 

Sounds like a beautiful day!

Russell Austin


On Nov 30, 2019, at 6:20 PM, Jerry Gmail <jerrylm1986@...> wrote:


Thx Mike
Jerry 

On Sat, Nov 30, 2019, 5:39 PM Mike Dwyer <q200pilot@...> wrote:
Beautiful day in the neighborhood so lets fly to Deland FL and watch the crazies jump out of perfectly good airplanes!  I hear Sam Hoskins was one of these crazies...  Anyway, the wind was light and variable so we took off on rwy 22.  Climbed to  2500' to stay under the Tampa Class C and headed North East. It was 68F outside and I think I see 19% humidity... When we got near there is was a bee hive of activity.  Jumpers away in 2 min so we just flew around and let it settle down.  Then heard jumpers away 2 min again.  What.  Do they jump every 2 min?  The active was rwy 23 so I got set up for a left base and watched for chutes.  It was harmless, landed and got to the closest tie down to the "Perfect Spot" restaurant that has a big window where you can eat a cuban sandwich and watch the chute landings. 
<20191130_115516.jpg>

On the way over there, I snapped a picture of Leesburg Airport, just before swerving around a Restricted airspace and Orlando Class B.  I could see the Atlantic ocean and was 46 miles away.
<20191130_115606.jpg>

Only one guy face planted when we were there.  Many made great landings.  One went over to see the Q200 close up.  He was a pilot and jumper.  
<20191130_124331.jpg>

So get your plane done and join us one day!

Mike Dwyer Q200

YouTube Videos: https://goo.gl/yKEHfK
Q200 Website: http://goo.gl/V8IrJF

Re: Looking for Alternative Canard layup schedules

Larry Severson
 

  1. They are not canards.
  2. Both have ailerons and individually controlled flaps
  3. Both airfoils are laminar.

The main wing on both the Q2 and the Dragonfly are NOT laminar flow (min drag)

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Brian Larick
Sent: Saturday, November 30, 2019 2:35 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Looking for Alternative Canard layup schedules

 

Generally what is unique about these two modified canards?

Brian



On Nov 30, 2019, at 10:15, Richard Kaczmarek 3RD <fastlittleairplanes@...> wrote:



We have both of them and will be happy to send them to you when we get back home from Ohio on Monday. 

 

Richard 

Aviation Composites 

 

On Sat, Nov 30, 2019, 10:11 AM Rick Hole <r.hole@...> wrote:

I probably have them—would have to look back in archive hard drive backups.  Before I started building I made a word document importing all the plans and included Waddlow in the canard chapter. 

I will look if nobody comes forward with Waddlow mod.

Rick Hole

Retired J

Re: Flight Report

Jerry Gmail
 
Edited

Thx Mike
Jerry 

On Sat, Nov 30, 2019, 5:39 PM Mike Dwyer <q200pilot@...> wrote:
Beautiful day in the neighborhood so lets fly to Deland FL and watch the crazies jump out of perfectly good airplanes!  I hear Sam Hoskins was one of these crazies...  Anyway, the wind was light and variable so we took off on rwy 22.  Climbed to  2500' to stay under the Tampa Class C and headed North East. It was 68F outside and I think I see 19% humidity... When we got near there is was a bee hive of activity.  Jumpers away in 2 min so we just flew around and let it settle down.  Then heard jumpers away 2 min again.  What.  Do they jump every 2 min?  The active was rwy 23 so I got set up for a left base and watched for chutes.  It was harmless, landed and got to the closest tie down to the "Perfect Spot" restaurant that has a big window where you can eat a cuban sandwich and watch the chute landings. 
20191130_115516.jpg
On the way over there, I snapped a picture of Leesburg Airport, just before swerving around a Restricted airspace and Orlando Class B.  I could see the Atlantic ocean and was 46 miles away.

Only one guy face planted when we were there.  Many made great landings.  One went over to see the Q200 close up.  He was a pilot and jumper.  

So get your plane done and join us one day!

Mike Dwyer Q200

YouTube Videos: https://goo.gl/yKEHfK
Q200 Website: http://goo.gl/V8IrJF

Flight Report

Mike Dwyer
 
Edited

Beautiful day in the neighborhood so lets fly to Deland FL and watch the crazies jump out of perfectly good airplanes!  I hear Sam Hoskins was one of these crazies...  Anyway, the wind was light and variable so we took off on rwy 22.  Climbed to  2500' to stay under the Tampa Class C and headed North East. It was 68F outside and I think I see 19% humidity... When we got near there is was a bee hive of activity.  Jumpers away in 2 min so we just flew around and let it settle down.  Then heard jumpers away 2 min again.  What.  Do they jump every 2 min?  The active was rwy 23 so I got set up for a left base and watched for chutes.  It was harmless, landed and got to the closest tie down to the "Perfect Spot" restaurant that has a big window where you can eat a cuban sandwich and watch the chute landings. 

On the way over there, I snapped a picture of Leesburg Airport, just before swerving around a Restricted airspace and Orlando Class B.  I could see the Atlantic ocean and was 46 miles away.

Only one guy face planted when we were there.  Many made great landings.  One went over to see the Q200 close up.  He was a pilot and jumper.  

So get your plane done and join us one day!

Mike Dwyer Q200

YouTube Videos: https://goo.gl/yKEHfK
Q200 Website: http://goo.gl/V8IrJF

Re: Looking for Alternative Canard layup schedules

Brian Larick
 

Generally what is unique about these two modified canards?

Brian

On Nov 30, 2019, at 10:15, Richard Kaczmarek 3RD <fastlittleairplanes@...> wrote:


We have both of them and will be happy to send them to you when we get back home from Ohio on Monday. 

Richard 
Aviation Composites 

On Sat, Nov 30, 2019, 10:11 AM Rick Hole <r.hole@...> wrote:

I probably have them—would have to look back in archive hard drive backups.  Before I started building I made a word document importing all the plans and included Waddlow in the canard chapter. 

I will look if nobody comes forward with Waddlow mod.

Rick Hole

Retired J

Re: Looking for Alternative Canard layup schedules

Richard Kaczmarek 3RD
 

We have both of them and will be happy to send them to you when we get back home from Ohio on Monday. 

Richard 
Aviation Composites 

On Sat, Nov 30, 2019, 10:11 AM Rick Hole <r.hole@...> wrote:

I probably have them—would have to look back in archive hard drive backups.  Before I started building I made a word document importing all the plans and included Waddlow in the canard chapter. 

I will look if nobody comes forward with Waddlow mod.

Rick Hole

Retired J

Re: Looking for Alternative Canard layup schedules

Rick Hole
 

I probably have them—would have to look back in archive hard drive backups.  Before I started building I made a word document importing all the plans and included Waddlow in the canard chapter. 

I will look if nobody comes forward with Waddlow mod.

Rick Hole

Retired J

Looking for Alternative Canard layup schedules

Sam Hoskins
 

Does anyone have the layup and construction schedules for the Jim Doyle/ Larry Weishauer canard?

How about the Wadalow canard? I would like to archive them in our Files section of the Q-List.

Thanks.

Sam

Re: Happy Thanksgiving

 

I heard the workin part....gettin lights ready, tables, chairs, turkey, make the bed, get my mom, brush my teeth........

Have a GREAT Thanksgiving Day  everyone.
GO Bears!!
K Welsh

On Thu, Nov 28, 2019 at 1:58 PM Richard Thomson <richard@...> wrote:
Thanks to all you Q listers for keeping my X Wing dream alive.

Catching you up Jay.

Have a great holiday . Some of us have to work :-(




Re: Happy Thanksgiving

Richard Thomson
 

Thanks to all you Q listers for keeping my X Wing dream alive.

Catching you up Jay.

Have a great holiday . Some of us have to work :-(

Re: Happy Thanksgiving

Bruce Crain
 

Wut Jimmeh sed!  teeth_smile
Bruce Crain


---------- Original Message ----------
From: "JMasal via Groups.Io" <JMasal@...>
To: main@Q-List.groups.io
Subject: Re: [Q-List] Happy Thanksgiving
Date: Thu, 28 Nov 2019 05:27:00 +0000 (UTC)

Happie Thanksgiving to all y'all...
and I am thankful for all y'all !!
j.


-----Original Message-----
From: Rodney Herzig <zzigster@...>
To: main@q-list.groups.io <main@q-list.groups.io>
Sent: Wed, Nov 27, 2019 7:46 pm
Subject: Re: [Q-List] Happy Thanksgiving

Happy Thanksgiving Jay and all of the rest of the Q-list
 
Rod Herzig
CozyIII N399BR

 

On Nov 27, 2019, at 3:29 PM, Jay Scheevel <jay@...> wrote:
To all you the Yanks, Happy Thanksgiving. For the Cannucks, sorry for the tardy greetings. For the rest of you internationally, best wishes on your thursday.

I am thankful to this list and its predecessors (Jim Masal, you know who you are...) and to all of you for helping me make my Tri-Q2 a reality.

It has now been 1 year since my first flight and I have over 80 hours on my airframe and am continuing to become a more proficient pilot along the way.

Thanks to you all, and best wishes from one happy Q-builder/flyer.

Cheers,
Jay Scheevel, N8WQ 80.5 hours
 


Re: Happy Thanksgiving

JMasal@...
 

Happie Thanksgiving to all y'all...
and I am thankful for all y'all !!
j.


-----Original Message-----
From: Rodney Herzig <zzigster@...>
To: main@q-list.groups.io <main@q-list.groups.io>
Sent: Wed, Nov 27, 2019 7:46 pm
Subject: Re: [Q-List] Happy Thanksgiving

Happy Thanksgiving Jay and all of the rest of the Q-list

Rod Herzig
CozyIII N399BR


On Nov 27, 2019, at 3:29 PM, Jay Scheevel <jay@...> wrote:

To all you the Yanks, Happy Thanksgiving. For the Cannucks, sorry for the tardy greetings. For the rest of you internationally, best wishes on your thursday.

I am thankful to this list and its predecessors (Jim Masal, you know who you are...) and to all of you for helping me make my Tri-Q2 a reality.

It has now been 1 year since my first flight and I have over 80 hours on my airframe and am continuing to become a more proficient pilot along the way.

Thanks to you all, and best wishes from one happy Q-builder/flyer.

Cheers,
Jay Scheevel, N8WQ 80.5 hours

Re: Happy Thanksgiving

Rodney Herzig
 

Happy Thanksgiving Jay and all of the rest of the Q-list

Rod Herzig
CozyIII N399BR


On Nov 27, 2019, at 3:29 PM, Jay Scheevel <jay@...> wrote:

To all you the Yanks, Happy Thanksgiving. For the Cannucks, sorry for the tardy greetings. For the rest of you internationally, best wishes on your thursday.

I am thankful to this list and its predecessors (Jim Masal, you know who you are...) and to all of you for helping me make my Tri-Q2 a reality.

It has now been 1 year since my first flight and I have over 80 hours on my airframe and am continuing to become a more proficient pilot along the way.

Thanks to you all, and best wishes from one happy Q-builder/flyer.

Cheers,
Jay Scheevel, N8WQ 80.5 hours

Happy Thanksgiving

Jay Scheevel
 

To all you the Yanks, Happy Thanksgiving. For the Cannucks, sorry for the tardy greetings. For the rest of you internationally, best wishes on your thursday.

I am thankful to this list and its predecessors (Jim Masal, you know who you are...) and to all of you for helping me make my Tri-Q2 a reality.

It has now been 1 year since my first flight and I have over 80 hours on my airframe and am continuing to become a more proficient pilot along the way.

Thanks to you all, and best wishes from one happy Q-builder/flyer.

Cheers,
Jay Scheevel, N8WQ 80.5 hours

Re: Q2 fuselage molds

Richard Thomson
 

Guys,

    If it has a core and an outer, they are not the molds for the foam cores are they ?


Rich T.

Q2 and Revmaster project for sale on Barnstormers

Tristan Vincent-Philpot <trisvp@...>
 

Hi All,

I hope it’s ok to post this here.

I have just readvertised my Q2 + Revmaster on Barnstormers. It’s been sitting in the corner of the hangar while I work on my Cozy. I need it gone for space. Too many other projects going on…the usual story!

Ask any questions and I’ll do my best to answer them.

Tristan

Re: Q2 fuselage molds, Larry

skyguynca
 

My name is David Mikesell from San Jose CA. I am very interested if you don't mind drop me an email with what you have for sale, pictures would be great but not required, and prices.
skyguynca at Yahoo dot com. Using the catch phrase from the famous "Monty Hall" - " LETS MAKE A DEAL!".

David Mikesell 


On Wed, Nov 27, 2019 at 9:22 AM, larry severson
<larry2@...> wrote:

I have a flyable q2 turbo, a q2 with wing and canard removed in preparation to make a safety plane (with molds) a simple completed Q2 HULL AND MORE. All or any portion to go for cheap, cheaper, and really cheap.

 

Larry Severson

18242 Peters Ct

Fountain Valley, CA  92708

(714) 968-9852

 

A solution to a problem simply works,

But the best solution works simply.

 

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of One Sky Dog via Groups.Io
Sent: Wednesday, November 27, 2019 6:35 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] Q2 fuselage molds

 

Yes! The design is abandoned.


On Nov 27, 2019, at 6:31 AM, William Turner via Groups.Io <willhowardair@...> wrote:

My question is, even if you have the molds, do you have the “rights” to make one?

Re: Q2 fuselage molds

 

They are coming out of the woodwork now


On Nov 27, 2019, at 10:22 AM, larry severson <larry2@...> wrote:



I have a flyable q2 turbo, a q2 with wing and canard removed in preparation to make a safety plane (with molds) a simple completed Q2 HULL AND MORE. All or any portion to go for cheap, cheaper, and really cheap.

 

Larry Severson

18242 Peters Ct

Fountain Valley, CA  92708

(714) 968-9852

 

A solution to a problem simply works,

But the best solution works simply.

 

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of One Sky Dog via Groups.Io
Sent: Wednesday, November 27, 2019 6:35 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] Q2 fuselage molds

 

Yes! The design is abandoned.


On Nov 27, 2019, at 6:31 AM, William Turner via Groups.Io <willhowardair@...> wrote:

My question is, even if you have the molds, do you have the “rights” to make one?

Re: Q2 fuselage molds

Larry Severson
 

I have a flyable q2 turbo, a q2 with wing and canard removed in preparation to make a safety plane (with molds) a simple completed Q2 HULL AND MORE. All or any portion to go for cheap, cheaper, and really cheap.

 

Larry Severson

18242 Peters Ct

Fountain Valley, CA  92708

(714) 968-9852

 

A solution to a problem simply works,

But the best solution works simply.

 

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of One Sky Dog via Groups.Io
Sent: Wednesday, November 27, 2019 6:35 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] Q2 fuselage molds

 

Yes! The design is abandoned.


On Nov 27, 2019, at 6:31 AM, William Turner via Groups.Io <willhowardair@...> wrote:

My question is, even if you have the molds, do you have the “rights” to make one?

Re: FlyQ EFB

Phil Lankford
 

Just letting you know Seattle Avionics has a sale on their chart and flight software packages. I bought into a lifetime membership a few years ago and I am really glad I did. 

Black Friday sale on every aviation web site and social media outlet you use.  Buy a Lifetime for just $299 (VFR) or $399 (VFR + IFR) by going to https://seattleavionics.com/BFF


Phil



On Nov 18, 2019, at 5:26 PM, Jay Scheevel <jay@...> wrote:

Contact Sonex. They sell a bolt on turbo for their AeroV (VW conversion) engine. Had a guy on my field install one on his and it is a nice unit and well built. Not sure if it will fit under the hood on a Q, but the pieces are all there and could be modified to fit. Can boost up to 40 in/hg.

Cheers,
Jay N8WQ Tri-Q2 80 hours

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Dragonfly Russell
Sent: Monday, November 18, 2019 5:30 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Flight Report

I’ve been wondering this myself. More specifically, has anyone turbonormalized a VW?  I realize that’s lipstick on a pig, but a VW is what my airplane is designed around.

Russell Austin