Re: Plans Shrinkage
I just noticed the message title (plan shrinkage), so forgive me for butting in, especially if someone else has already offered to help, but I have a large format scanner, and if someone sent me a good "original" print and the proper dimensions, I could scan it and Photoshop it to be the correct size and convert it to a PDF for anyone to have printed locally and it would be as accurate as possible - maybe even as accurate as the draftsman intended. Pat
On Thu, Apr 2, 2020 at 6:29 PM <dustinlanell@...> wrote: Checked BL-0 and BL-100 and compared to plans. Both are 1.5% longer in length. That's 3/16" longer @C.L. and 1/8" on the tip template. This measured from the front of spar to LE along the level line. The spar radius seems to match perfectly...even tried the templates on the spar at their respective places. They seem to fit.
|
|
Re: Plans Shrinkage
Dustin Graber
Checked BL-0 and BL-100 and compared to plans. Both are 1.5% longer in length. That's 3/16" longer @C.L. and 1/8" on the tip template. This measured from the front of spar to LE along the level line. The spar radius seems to match perfectly...even tried the templates on the spar at their respective places. They seem to fit.
Bruce, I haven't cut the cores yet. Dustin
|
|
Re: Plans Shrinkage
What kind of percentage difference are you finding, Dustin? If it is not large, it is probably not worth worrying about. Just so the level lines are level.
Cheers, Jay
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of dustinlanell@...
Thanks Bruce. I'll check.
|
|
Re: Plans Shrinkage
Dustin Graber
Thanks Bruce. I'll check.
Dustin
|
|
Re: FW: Video Filmed With Drones Inside The National Museum of the U.S. Air Force
Nice video Jerry! Definitely would love to see that museum in person. The person flying that drone must have been a drone racing league participant. He did an awesome job of covering the place. However, I couldn’t help but notice that the drone pilot clipped
a wire at approximately 4 min 44 sec into the video. 🤔 keep em coming.
toggle quoted messageShow quoted text
Take care,
RODNEY
On Apr 2, 2020, at 10:08 AM, Jerry Gmail <jerrylm1986@...> wrote:
|
|
Re: FW: Video Filmed With Drones Inside The National Museum of the U.S. Air Force
Jerry Marstall
I'm up for it. You too. J
On Wed, Apr 1, 2020, 8:23 PM Kevin Boddicker <trumanst@...> wrote:
|
|
Re: Covid19
hgflier
Jim, There have been 5,316 deaths reported so far from COVID-19, or one death per ~66k people in this country, If you have 66k contacts, then on average you would expect one of them to be dead. In a typical year with 30k influenza deaths, I cannot remember a year when I knew someone who died. But just wait, at the pace the country is going, we'll all soon know someone who died from this. (moreso in the parts of the country that failed to take this more seriously and failed to act earlier) Geoff --
On Wednesday, April 1, 2020, 01:57:27 PM PDT, Jim Patillo <logistics_engineering@...> wrote:
Good afternoon fellas, I know this is way off topic for our group but I've been doing a query of people I know across this country and haven't found one person that knows someone (personally) who contracted and died from Covid19. To further that, I would like to ask the same question of you. Yes or no. I find this kind of weird. Regards, Jim N46JP - Q200
|
|
Re: Covid19
JMasal@...
negative here in dallas
-----Original Message-----
From: Corbin via groups.io <c_geiser@...> To: main <main@Q-List.groups.io> Sent: Thu, Apr 2, 2020 8:22 am Subject: Re: [Q-List] Covid19 Well, I have to add two more to my earlier list of just one. I just found out this morning that a friend here in Texas, and his dad, both have tested positive. Only his dad is in the hospital at this time.
Corbin
On April 1, 2020 at 6:38 PM, Kevin Boddicker <trumanst@...> wrote:
-- Corbin N33QR
|
|
Re: Covid19
Well, I have to add two more to my earlier list of just one. I just found out this morning that a friend here in Texas, and his dad, both have tested positive. Only his dad is in the hospital at this time. Corbin
On April 1, 2020 at 6:38 PM, Kevin Boddicker <trumanst@...> wrote:
--
Corbin N33QR
|
|
Re: Socially Isolated Flight Report - I guess the hard way.
Good on ya Sammy!! And probably at Mach .3 or so!!!
toggle quoted messageShow quoted text
Bruce
On Apr 1, 2020, at 2:28 PM, Sam Hoskins <sam.hoskins@...> wrote:
|
|
Re: Plans Shrinkage
I think Norm Howell May have over sized his cores and then sanded them down to size but that may be a rumor. As for the ones that were to small perhaps the hot wire was to hot or was pulled along to slow.
toggle quoted messageShow quoted text
Just my 2 cents worth. Bruce
On Mar 31, 2020, at 2:39 PM, dustinlanell@... wrote:
|
|
Re: FW: Video Filmed With Drones Inside The National Museum of the U.S. Air Force
Kevin Boddicker
Nice Jerry. Maybe we should plan a fly in there sometime and have fun!!!
toggle quoted messageShow quoted text
All stay well!
Kevin Boddicker
TriQ 200 N7868B 505 hrs Luana, IA.
|
|
Re: Covid19
Martin Skiby
No
toggle quoted messageShow quoted text
Martin
On Apr 1, 2020, at 1:59 PM, Kevin Whitton via groups.io <haywired_texan@...> wrote:
|
|
Re: Covid19
overlormustafa <overlordmustafa@...>
The cashier wasn't amused when I said "is this plexiglass for me to sneeze on." then she went onto explain how her sister in North Carolina was intubated but has just gotten off of it and to NOT kind around with the Covid-19 virus. Also, and this is most important, 'this' has NOT started. We have not, for the most part, had enough time for this pandemic to fully take hold. The next couple of weeks the numbers will BEGIN to greatly increase. Hospital beds will fill up, ICU beds will fill up. "This" hasn't really begun. It will. Eddy
On Wed, Apr 1, 2020 at 6:38 PM Kevin Boddicker <trumanst@...> wrote:
|
|
Re: Covid19
Kevin Boddicker
No
toggle quoted messageShow quoted text
Kevin Boddicker
TriQ 200 N7868B 505 hrs Luana, IA.
|
|
Re: Covid19
No I don’t, I know there are crew members at my airline but don’t know anyone personally
toggle quoted messageShow quoted text
On Apr 1, 2020, at 2:02 PM, Kevin R. Walsh <krwalsh@...> wrote:
|
|
Re: Covid19
|
|
Re: Covid19
Mike Lutman <mikeinvestor2003@...>
I found out today an instructor on one of my Internet-based classes tested positive for CV but I don't know anyone personally who has it. My daughter is a neo-natal nurse in Atlanta and so far they haven't had any cases in her office either. Hopefully this won't change.
On Wednesday, April 1, 2020, 6:38:49 PM EDT, Jerry Marstall <jnmarstall@...> wrote:
Not me. Hope it stays that way. Jerry -------- Original message -------- From: Jay Scheevel <jay@...> Date: 4/1/20 5:16 PM (GMT-05:00) To: main@Q-List.groups.io Subject: Re: [Q-List] Covid19 Nope. Have not got it. Don’t know anyone who got it.
Jay
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jim Patillo
Good afternoon fellas,
|
|
Re: Covid19
Jerry Marstall <jnmarstall@...>
Not me. Hope it stays that way.
toggle quoted messageShow quoted text
Jerry
-------- Original message -------- From: Jay Scheevel <jay@...> Date: 4/1/20 5:16 PM (GMT-05:00) To: main@Q-List.groups.io Subject: Re: [Q-List] Covid19 Nope. Have not got it. Don’t know anyone who got it.
Jay
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jim Patillo
Good afternoon fellas,
|
|
Re: Covid19
Paul Fisher
No, don't know anyone who has it or died from it... at least not yet. I hope I don't. I like the idea of no SARS-CoV-2 above 5000 feet (I assume that is AGL). We all need to get up there where it's safe!! Paul
On Wed, Apr 1, 2020, 15:57 Jim Patillo <Logistics_engineering@...> wrote: Good afternoon fellas,
|
|