Date   
Re: Small town Q-driver makes bigtime publication

John Hoxie
 

Thanx Jerry.
Very informative.  I plan on getting one for use in my ultralights & Q2. I plan on eventually building & using on some flights a 25 gallon long range tank, giving me about 50 gallons usable fuel for some solo flights.


On Tue, May 12, 2020 at 7:59 PM, One Sky Dog via groups.io
<Oneskydog@...> wrote:
Good editorial Jerry,

Clever idea! Reminds me of a briefing I got at Wright Paterson AFB at least a decade ago.

Charlie 


On May 12, 2020, at 4:42 PM, Jerry Marstall <jnmarstall@...> wrote:



Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

Re: Small town Q-driver makes bigtime publication

One Sky Dog
 

Good editorial Jerry,

Clever idea! Reminds me of a briefing I got at Wright Paterson AFB at least a decade ago.

On May 12, 2020, at 4:42 PM, Jerry Marstall <jnmarstall@...> wrote:



Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

Re: Small town Q-driver makes bigtime publication

Jerry Marstall
 

Thx Paul.
I asked them to contact you directly.  I too was disappointed- not.

-------- Original message --------
From: Paul Fisher <rv7a.n18pf@...>
Date: 5/12/20 7:50 PM (GMT-05:00)
To: main@q-list.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

Nice job Jerry!  How come there's no picture of you modeling the bag?!? I have such a picture if you need it!! ;-)

Paul

On Tue, May 12, 2020, 18:42 Jerry Marstall <jnmarstall@...> wrote:

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

Re: Small town Q-driver makes bigtime publication

Paul Fisher
 

Nice job Jerry!  How come there's no picture of you modeling the bag?!? I have such a picture if you need it!! ;-)

Paul

On Tue, May 12, 2020, 18:42 Jerry Marstall <jnmarstall@...> wrote:

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

Small town Q-driver makes bigtime publication

Jerry Marstall
 

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

Tri Q Kit For Sale, Denton, TX

Dave A
 

I have a fairly complete Tri-Q project for sale. Has fuselage with header tank and split fuselage mod installed, canopy, wing, canard (bottom side glassed, top needs completing, appears all glass to do so is here and pre-cut), fin, cowling, spinner, landing gear (nose and main), wheel pants and fairings, wheels and brakes, tail wheel parts (should you need them) fuel tank, many many pieces and parts which I have not inventoried. Plans are included. Wing rack is not included. Project is located at KDTO (Denton, TX).

I work at the airport so I’m available most days to show the project.  $2400.00


Dave Anderson

Re: A model based on Quickie and Viking Dragonfly

Jay Scheevel
 

Glad to know that you are still lurking out there, Sanjay. I am really enjoying having my plane flying. Lots of fun tweaking little things and enjoying the sights.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 8:27 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Hello Jay, thanks. I've been passively following the developments in the group, and keeping track of friends. Congrats on  89 hours on your Q.

Cheers

Sanjay

 

On Sun, May 10, 2020, 2:52 PM Jay Scheevel <jay@...> wrote:

Great to hear from you again, Sanjay!  Long time, no hear.

 

Cheers,

Jay Scheevel, Tri-Q2 N8WQ, 89 hours.

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 5:58 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Maksim, Brilliant! 

Sanjay

 

Re: A model based on Quickie and Viking Dragonfly

Sanjay
 

Hello Jay, thanks. I've been passively following the developments in the group, and keeping track of friends. Congrats on  89 hours on your Q.
Cheers
Sanjay


On Sun, May 10, 2020, 2:52 PM Jay Scheevel <jay@...> wrote:

Great to hear from you again, Sanjay!  Long time, no hear.

 

Cheers,

Jay Scheevel, Tri-Q2 N8WQ, 89 hours.

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 5:58 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Maksim, Brilliant! 

Sanjay

 

Re: A model based on Quickie and Viking Dragonfly

Jay Scheevel
 

Great to hear from you again, Sanjay!  Long time, no hear.

 

Cheers,

Jay Scheevel, Tri-Q2 N8WQ, 89 hours.

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 5:58 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Maksim, Brilliant! 

Sanjay

 

Re: A model based on Quickie and Viking Dragonfly

Sanjay
 

Maksim, Brilliant! 
Sanjay

On Sat, May 9, 2020 at 9:31 AM Maksim via groups.io <letun=inbox.ru@groups.io> wrote:
Good day to all. For children I decided to make a toy, almost our plane. We already tried and printed on a printer and now we started to assemble from plywood. If anyone is interested, I began to gradually describe this process on a local site and upload files absolutely free there, suddenly you want to repeat it. At first, I planned to leave the model as it was, hang it under the ceiling, but it is possible to fill the voids with foam, putty and paint. I am preparing another type of model in the same way, there I will do an overview of all the options.
If you have any questions about the assembly, write on that forum, there I read more often :)
http://www.forum.larus.aero/viewtopic.php?f=202&t=19209&p=21148#p21148
#quickie Qvikingdragonfly #model

A model based on Quickie and Viking Dragonfly

Maksim
 

Good day to all. For children I decided to make a toy, almost our plane. We already tried and printed on a printer and now we started to assemble from plywood. If anyone is interested, I began to gradually describe this process on a local site and upload files absolutely free there, suddenly you want to repeat it. At first, I planned to leave the model as it was, hang it under the ceiling, but it is possible to fill the voids with foam, putty and paint. I am preparing another type of model in the same way, there I will do an overview of all the options.
If you have any questions about the assembly, write on that forum, there I read more often :)
http://www.forum.larus.aero/viewtopic.php?f=202&t=19209&p=21148#p21148
#quickie Qvikingdragonfly #model

Re: Q2 Project

Eugen Pilarski
 

Hello Q-List member,

just a short notice about the progress of Q2 re-design. Currently the position of the bulkheads will be fixed and build up, after that the surface will be create. 

Best regards

Eugen 



Am 28.04.2020 um 17:05 schrieb Dave Hudak via groups.io <dghudie@...>:

Hi Brad, 
Any chance I could get a copy of what you have drawn thus far? I have a Q2 that I rebuilt years ago with a Subaru 1.8 liter, then crashed. I need to replace the canard and firewall and thought maybe a new drawing would help get me going on the the effort.  So any SolidWorks drawing would be much appreciated. 
The bird has been hanging from the ceiling since 2005 and I finally have the house at a point where I can think about the QBird......200 hours of the most fun I have ever had in an airplane!
Dave






On Apr 27, 2020, at 5:01 PM, sky_kid1080 <fly-boy1080@...> wrote:


I have some of the plane drawn up in solidworks I’d be willing to team up with someone and get it finished up. I have my own Q2 to finish and I like to do things right the first time. Sorry I know this is an older message and I don’t respond often.

Thanks,
Brad
 
Sent from Mail for Windows 10
 
From: Jay Scheevel
Sent: Friday, April 24, 2020 3:42 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
If you read the part of the plans about installing the bulkheads, they allow the builder to vary the angle and size of that bulkhead to compensate for pilot size. There is also some variation allowed in the forward/back position of the main tank for the same reason.  I would just suggest rotating the base of the bulkhead backward until it intersects the fuselage. The original plan required a lot of cutting and fitting. The 4 fuselage shells were oversized and needed to be trimmed and there were no marks to help the builder do this, only small drawings. There was a lot of work involved to get a good fit between fuselage and bulkheads. No two of these planes are identical once they are complete.
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 1:21 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Yup, that’s right. Do you have a angel between the seat bulkhead top und bottom? Not sure which angle they should? Something else between 130° and 150° maybe?
 
Eugen

 

Am 24.04.2020 um 20:28 schrieb Jay Scheevel <jay@...>:
 
Your seatback bulkhead (the inclined portion) needs to intersect the bottom of the fuselage. 
 
Cheers,
Jay
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 12:16 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Here we go :-)

<image001.png>

<image002.png>
 

 

Re: Koger Sunshades

Martin Skiby
 

Yes they will! Super neat and I sure wish they had been available years ago!!!

Martin

On May 3, 2020, at 2:41 PM, Corbin via groups.io <c_geiser=icloud.com@groups.io> wrote:

I saw these sunshades in Matthew’s post, from when he landed his Q200 at LAX this week, and ordered them right away. They sure are going to help down here in the Texas sun.

Install:



Corbin

--
Corbin
N33QR



<Video.mov>
<Video_1.mov>

Koger Sunshades

Corbin
 

I saw these sunshades in Matthew’s post, from when he landed his Q200 at LAX this week, and ordered them right away. They sure are going to help down here in the Texas sun.

Install:



Corbin

--
Corbin
N33QR

Re: Electric Tri Q

Phil Lankford
 


Has this been around for some time?  I just came across this article. 

On May 1, 2020, at 2:32 PM, Bruce Crain <jcrain2@...> wrote:

Will try to triangulate the date in July.  Maybe the weather will cooperate!
Brisk I
On May 1, 2020, at 11:46 AM, Kevin Boddicker <trumanst@...> wrote:

Flingers,
I just got the news that Oshkosh has been canceled.
I am following suit and canceling the Fling.

However, with OSH being canceled, maybe we could move the Fling back.?
If folks have plans for OSH, maybe they switch their destination and we could schedule an event!
Will have to keep an eye on the covid assessment at the time, but we can all hope it will be under control.
Anyway, Fling canceled May 15,16,17!
Let me know what you think about scheduling in July!

Stay well, fly safe, hope we can pull this off!

Kevin Boddicker
TriQ200 N7868B
Luana, IA.





____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

FDA Permits Emergency Use of Drug for COVID-19 Patients
http://thirdpartyoffers.juno.com/TGL3131/5eac9563d5892156104c1st01duc1
Tesla Shares Fall as Musk Reassesses His Life
http://thirdpartyoffers.juno.com/TGL3131/5eac95643b93156104c1st01duc2
New White House Press Chief Makes Her Debut
http://thirdpartyoffers.juno.com/TGL3131/5eac956426b79156104c1st01duc3



Re: Spring fling

Bruce Crain
 

Will try to triangulate the date in July. Maybe the weather will cooperate!
Brisk I
On May 1, 2020, at 11:46 AM, Kevin Boddicker <trumanst@...> wrote:

Flingers,
I just got the news that Oshkosh has been canceled.
I am following suit and canceling the Fling.

However, with OSH being canceled, maybe we could move the Fling back.?
If folks have plans for OSH, maybe they switch their destination and we could schedule an event!
Will have to keep an eye on the covid assessment at the time, but we can all hope it will be under control.
Anyway, Fling canceled May 15,16,17!
Let me know what you think about scheduling in July!

Stay well, fly safe, hope we can pull this off!

Kevin Boddicker
TriQ200 N7868B
Luana, IA.



____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

FDA Permits Emergency Use of Drug for COVID-19 Patients
http://thirdpartyoffers.juno.com/TGL3131/5eac9563d5892156104c1st01duc1
Tesla Shares Fall as Musk Reassesses His Life
http://thirdpartyoffers.juno.com/TGL3131/5eac95643b93156104c1st01duc2
New White House Press Chief Makes Her Debut
http://thirdpartyoffers.juno.com/TGL3131/5eac956426b79156104c1st01duc3

Re: Spring fling

Jerry Marstall
 

Say when and I'll try to be there. Jerry 

-------- Original message --------
From: Kevin Boddicker <trumanst@...>
Date: 5/1/20 2:41 PM (GMT-05:00)
To: main@Q-List.groups.io
Subject: [Q-List] Spring fling

Flingers,
I just got the news that Oshkosh has been canceled.
I am following suit and canceling the Fling.

However, with OSH being canceled, maybe we could move the Fling back.?
If folks have plans for OSH, maybe they switch their destination and we could schedule an event!
Will have to keep an eye on the covid assessment at the time, but we can all hope it will be under control.
Anyway, Fling canceled May 15,16,17!
Let me know what you think about scheduling in July!

Stay well, fly safe, hope we can pull this off!

Kevin Boddicker
TriQ200 N7868B
Luana, IA.



Re: Spring fling

John Hoxie
 

Kevin,
Thoughts here are mid July would be good. This was going to be my first year at Oshkosh.


On Fri, May 1, 2020 at 12:37 PM, Paul Fisher
<rv7a.n18pf@...> wrote:
Sounds like a wise decision to cancel in May.  I like the idea of trying for July, assuming things are better by then.

Paul Fisher
Q-200 N17PF

On Fri, May 1, 2020, 12:46 Kevin Boddicker <trumanst@...> wrote:
Flingers,
I just got the news that Oshkosh has been canceled.
I am following suit and canceling the Fling.

However, with OSH being canceled, maybe we could move the Fling back.?
If folks have plans for OSH, maybe they switch their destination and we could schedule an event!
Will have to keep an eye on the covid assessment at the time, but we can all hope it will be under control.
Anyway, Fling canceled May 15,16,17!
Let me know what you think about scheduling in July!

Stay well, fly safe, hope we can pull this off!

Kevin Boddicker
TriQ200 N7868B
Luana, IA.



Re: Spring fling

Jay Scheevel
 

Cancelling Oshkosh?! That is like canceling the fourth of July! I am game
for a later fling, then a FOD in Enid. Lots of good flying there.

Cheers,
Jay

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin
Boddicker
Sent: Friday, May 01, 2020 11:47 AM
To: main@Q-List.groups.io
Subject: [Q-List] Spring fling

Flingers,
I just got the news that Oshkosh has been canceled.
I am following suit and canceling the Fling.

However, with OSH being canceled, maybe we could move the Fling back.?
If folks have plans for OSH, maybe they switch their destination and we
could schedule an event!
Will have to keep an eye on the covid assessment at the time, but we can all
hope it will be under control.
Anyway, Fling canceled May 15,16,17!
Let me know what you think about scheduling in July!

Stay well, fly safe, hope we can pull this off!

Kevin Boddicker
TriQ200 N7868B
Luana, IA.

Re: Spring fling

Paul Fisher
 

Sounds like a wise decision to cancel in May.  I like the idea of trying for July, assuming things are better by then.

Paul Fisher
Q-200 N17PF

On Fri, May 1, 2020, 12:46 Kevin Boddicker <trumanst@...> wrote:
Flingers,
I just got the news that Oshkosh has been canceled.
I am following suit and canceling the Fling.

However, with OSH being canceled, maybe we could move the Fling back.?
If folks have plans for OSH, maybe they switch their destination and we could schedule an event!
Will have to keep an eye on the covid assessment at the time, but we can all hope it will be under control.
Anyway, Fling canceled May 15,16,17!
Let me know what you think about scheduling in July!

Stay well, fly safe, hope we can pull this off!

Kevin Boddicker
TriQ200 N7868B
Luana, IA.