Date   

Re: Quickie Q1 / Q2 Material

Jay Scheevel
 

Hi Eugen,

 

I never used the green urethane foam. The fuselage shells were built using ¼” foam (rear shells) and 3/8” foam for the forward shells. They were made using vacuum bagging in female molds. The fiberglass used for those shells was lighter than the 9oz bidirectional fiberglass that is used for wings/bulkheads/fuel tanks.  I am not sure of the weight of that cloth, since the shells were pre-built at the factory. There was one Tri-Q built in Canada without the use of the pre-made shells, so it is possible.

 

All of materials you list below are available from Aircraft Spruce.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Thursday, May 14, 2020 11:46 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Quickie Q1 / Q2 Material

 

Dear Q-List member,

I just extended the list, please see the attachment.

Best regards

Eugen 




Re: Quickie Q1 / Q2 Material

Eugen Pilarski
 

Dear Q-List member,

I just extended the list, please see the attachment.

Best regards

Eugen 




Quickie Q1 / Q2 Material

Eugen Pilarski
 

Dear Q-List member,

I´m on the way to investigate the requested foam material for build the aircraft parts. In the quickheads forum I catch that information below.  It would be glad if somebody added additional information or in best case a source, aircraft spruce is already knowed so far.

Q1 and Q2 Foam Material list 

Color description Source

blue foam styrofoam-1.6 lb/cu.ft. ?
Red 6 lbs/cuft ?
Gold/White 3.4 lbs/cuft ?
Blue 1.6 lbs/cuft ?
orange or green urethane 210 2.0 lbs/cuft  ?

Thank you very much.

Best regards from Germany

Eugen 


Re: Small town Q-driver makes bigtime publication

Jerry Marstall <jnmarstall@...>
 

Too scary for me.

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 5/13/20 3:28 PM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

Hi Jerry,

 

Found just what you need to accessorize your “flight bag”

 

Cheers,

Jay

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jerry Marstall
Sent: Wednesday, May 13, 2020 8:47 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi. I dont fly far without it.  I started by trimming. I'm no longer the man I used to be. 

Have since developed a technique for avoidance of the fur.  Another technique is to put it on and then trim all hairs trapped by the condom.  They come off with the condom.

 

The editor edited out my part on dealing with the condom.

 

I didn't know you were a believer. I'll put you on the membership list so you can get the newsletter.

 

-------- Original message --------

From: Bruce Crain <jcrain2@...>

Date: 5/13/20 10:32 AM (GMT-05:00)

Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi Jerry!

I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!

Bruce

---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

 


Re: Small town Q-driver makes bigtime publication

Jay Scheevel
 

Hi Jerry,

 

Found just what you need to accessorize your “flight bag”

 

Cheers,

Jay

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jerry Marstall
Sent: Wednesday, May 13, 2020 8:47 AM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi. I dont fly far without it.  I started by trimming. I'm no longer the man I used to be. 

Have since developed a technique for avoidance of the fur.  Another technique is to put it on and then trim all hairs trapped by the condom.  They come off with the condom.

 

The editor edited out my part on dealing with the condom.

 

I didn't know you were a believer. I'll put you on the membership list so you can get the newsletter.

 

-------- Original message --------

From: Bruce Crain <jcrain2@...>

Date: 5/13/20 10:32 AM (GMT-05:00)

Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

 

Hi Jerry!

I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!

Bruce

---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry

 


Re: Small town Q-driver makes bigtime publication

Jerry Marstall <jnmarstall@...>
 

Hi. I dont fly far without it.  I started by trimming. I'm no longer the man I used to be. 
Have since developed a technique for avoidance of the fur.  Another technique is to put it on and then trim all hairs trapped by the condom.  They come off with the condom.

The editor edited out my part on dealing with the condom.

I didn't know you were a believer. I'll put you on the membership list so you can get the newsletter.

-------- Original message --------
From: Bruce Crain <jcrain2@...>
Date: 5/13/20 10:32 AM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

Hi Jerry!
I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!
Bruce

---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry




Re: Small town Q-driver makes bigtime publication

Bruce Crain
 

Hi Jerry!
I have used the leg bag on long trips with other people in the cockpit than my wife.  Saved my bacon!  There is one thing that you might want to do before  you use the external catheter.  Take a little time to "trim" the "curly locks" down my your "man hood.  It really smarts getting a hair in the catheter when you roll it down!  I know TMI!
Bruce


---------- Original Message ----------
From: "Jerry Marstall" <jnmarstall@...>
To: "Q-list IO" <main@Q-List.groups.io>
Subject: [Q-List] Small town Q-driver makes bigtime publication
Date: Tue, 12 May 2020 19:42:41 -0400

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry




Re: Q2 Project

Eugen Pilarski
 

Hello Q-List member,

the design of fuselage is done so far, please find some picture below that Email (scroll down to end). The next step is to fit in bulkheads and Jig-level boards. I will send a new update soon.

Best regards from Germany

Eugen



Am 04.05.2020 um 22:14 schrieb Eugen Pilarski <interbus@...>:

Hello Q-List member,

just a short notice about the progress of Q2 re-design. Currently the position of the bulkheads will be fixed and build up, after that the surface will be create. 

Best regards

Eugen 



Am 28.04.2020 um 17:05 schrieb Dave Hudak via groups.io <dghudie@...>:

Hi Brad, 
Any chance I could get a copy of what you have drawn thus far? I have a Q2 that I rebuilt years ago with a Subaru 1.8 liter, then crashed. I need to replace the canard and firewall and thought maybe a new drawing would help get me going on the the effort.  So any SolidWorks drawing would be much appreciated. 
The bird has been hanging from the ceiling since 2005 and I finally have the house at a point where I can think about the QBird......200 hours of the most fun I have ever had in an airplane!
Dave






On Apr 27, 2020, at 5:01 PM, sky_kid1080 <fly-boy1080@...> wrote:


I have some of the plane drawn up in solidworks I’d be willing to team up with someone and get it finished up. I have my own Q2 to finish and I like to do things right the first time. Sorry I know this is an older message and I don’t respond often.

Thanks,
Brad
 
Sent from Mail for Windows 10
 
From: Jay Scheevel
Sent: Friday, April 24, 2020 3:42 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
If you read the part of the plans about installing the bulkheads, they allow the builder to vary the angle and size of that bulkhead to compensate for pilot size. There is also some variation allowed in the forward/back position of the main tank for the same reason.  I would just suggest rotating the base of the bulkhead backward until it intersects the fuselage. The original plan required a lot of cutting and fitting. The 4 fuselage shells were oversized and needed to be trimmed and there were no marks to help the builder do this, only small drawings. There was a lot of work involved to get a good fit between fuselage and bulkheads. No two of these planes are identical once they are complete.
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 1:21 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Yup, that’s right. Do you have a angel between the seat bulkhead top und bottom? Not sure which angle they should? Something else between 130° and 150° maybe?
 
Eugen

 

Am 24.04.2020 um 20:28 schrieb Jay Scheevel <jay@...>:
 
Your seatback bulkhead (the inclined portion) needs to intersect the bottom of the fuselage. 
 
Cheers,
Jay
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 12:16 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Here we go :-)

<image001.png>

<image002.png>
 

 
<Bildschirmfoto 2020-05-04 um 22.11.35.png>


Re: Small town Q-driver makes bigtime publication

John Hoxie
 

Thanx Jerry.
Very informative.  I plan on getting one for use in my ultralights & Q2. I plan on eventually building & using on some flights a 25 gallon long range tank, giving me about 50 gallons usable fuel for some solo flights.


On Tue, May 12, 2020 at 7:59 PM, One Sky Dog via groups.io
<Oneskydog@...> wrote:
Good editorial Jerry,

Clever idea! Reminds me of a briefing I got at Wright Paterson AFB at least a decade ago.

Charlie 


On May 12, 2020, at 4:42 PM, Jerry Marstall <jnmarstall@...> wrote:



Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry


Re: Small town Q-driver makes bigtime publication

One Sky Dog
 

Good editorial Jerry,

Clever idea! Reminds me of a briefing I got at Wright Paterson AFB at least a decade ago.

On May 12, 2020, at 4:42 PM, Jerry Marstall <jnmarstall@...> wrote:



Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry


Re: Small town Q-driver makes bigtime publication

Jerry Marstall <jnmarstall@...>
 

Thx Paul.
I asked them to contact you directly.  I too was disappointed- not.

-------- Original message --------
From: Paul Fisher <rv7a.n18pf@...>
Date: 5/12/20 7:50 PM (GMT-05:00)
To: main@q-list.groups.io
Subject: Re: [Q-List] Small town Q-driver makes bigtime publication

Nice job Jerry!  How come there's no picture of you modeling the bag?!? I have such a picture if you need it!! ;-)

Paul

On Tue, May 12, 2020, 18:42 Jerry Marstall <jnmarstall@...> wrote:

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry


Re: Small town Q-driver makes bigtime publication

Paul Fisher
 

Nice job Jerry!  How come there's no picture of you modeling the bag?!? I have such a picture if you need it!! ;-)

Paul

On Tue, May 12, 2020, 18:42 Jerry Marstall <jnmarstall@...> wrote:

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry


Small town Q-driver makes bigtime publication

Jerry Marstall <jnmarstall@...>
 

Check out the June electronic edition of Kitplanes (kitplanes.com).  There is an article titled, Other P Factor.  At the end of that article is an editorial titled Another Way to Go.  Looking for respect!!!

Jerry


Tri Q Kit For Sale, Denton, TX

Dave A <usaf_david@...>
 

I have a fairly complete Tri-Q project for sale. Has fuselage with header tank and split fuselage mod installed, canopy, wing, canard (bottom side glassed, top needs completing, appears all glass to do so is here and pre-cut), fin, cowling, spinner, landing gear (nose and main), wheel pants and fairings, wheels and brakes, tail wheel parts (should you need them) fuel tank, many many pieces and parts which I have not inventoried. Plans are included. Wing rack is not included. Project is located at KDTO (Denton, TX).

I work at the airport so I’m available most days to show the project.  $2400.00


Dave Anderson


Re: A model based on Quickie and Viking Dragonfly

Jay Scheevel
 

Glad to know that you are still lurking out there, Sanjay. I am really enjoying having my plane flying. Lots of fun tweaking little things and enjoying the sights.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 8:27 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Hello Jay, thanks. I've been passively following the developments in the group, and keeping track of friends. Congrats on  89 hours on your Q.

Cheers

Sanjay

 

On Sun, May 10, 2020, 2:52 PM Jay Scheevel <jay@...> wrote:

Great to hear from you again, Sanjay!  Long time, no hear.

 

Cheers,

Jay Scheevel, Tri-Q2 N8WQ, 89 hours.

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 5:58 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Maksim, Brilliant! 

Sanjay

 


Re: A model based on Quickie and Viking Dragonfly

Sanjay
 

Hello Jay, thanks. I've been passively following the developments in the group, and keeping track of friends. Congrats on  89 hours on your Q.
Cheers
Sanjay


On Sun, May 10, 2020, 2:52 PM Jay Scheevel <jay@...> wrote:

Great to hear from you again, Sanjay!  Long time, no hear.

 

Cheers,

Jay Scheevel, Tri-Q2 N8WQ, 89 hours.

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 5:58 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Maksim, Brilliant! 

Sanjay

 


Re: A model based on Quickie and Viking Dragonfly

Jay Scheevel
 

Great to hear from you again, Sanjay!  Long time, no hear.

 

Cheers,

Jay Scheevel, Tri-Q2 N8WQ, 89 hours.

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sanjay
Sent: Sunday, May 10, 2020 5:58 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] A model based on Quickie and Viking Dragonfly

 

Maksim, Brilliant! 

Sanjay

 


Re: A model based on Quickie and Viking Dragonfly

Sanjay
 

Maksim, Brilliant! 
Sanjay

On Sat, May 9, 2020 at 9:31 AM Maksim via groups.io <letun=inbox.ru@groups.io> wrote:
Good day to all. For children I decided to make a toy, almost our plane. We already tried and printed on a printer and now we started to assemble from plywood. If anyone is interested, I began to gradually describe this process on a local site and upload files absolutely free there, suddenly you want to repeat it. At first, I planned to leave the model as it was, hang it under the ceiling, but it is possible to fill the voids with foam, putty and paint. I am preparing another type of model in the same way, there I will do an overview of all the options.
If you have any questions about the assembly, write on that forum, there I read more often :)
http://www.forum.larus.aero/viewtopic.php?f=202&t=19209&p=21148#p21148
#quickie Qvikingdragonfly #model


A model based on Quickie and Viking Dragonfly

Maksim <letun@...>
 

Good day to all. For children I decided to make a toy, almost our plane. We already tried and printed on a printer and now we started to assemble from plywood. If anyone is interested, I began to gradually describe this process on a local site and upload files absolutely free there, suddenly you want to repeat it. At first, I planned to leave the model as it was, hang it under the ceiling, but it is possible to fill the voids with foam, putty and paint. I am preparing another type of model in the same way, there I will do an overview of all the options.
If you have any questions about the assembly, write on that forum, there I read more often :)
http://www.forum.larus.aero/viewtopic.php?f=202&t=19209&p=21148#p21148
#quickie Qvikingdragonfly #model


Re: Q2 Project

Eugen Pilarski
 

Hello Q-List member,

just a short notice about the progress of Q2 re-design. Currently the position of the bulkheads will be fixed and build up, after that the surface will be create. 

Best regards

Eugen 



Am 28.04.2020 um 17:05 schrieb Dave Hudak via groups.io <dghudie@...>:

Hi Brad, 
Any chance I could get a copy of what you have drawn thus far? I have a Q2 that I rebuilt years ago with a Subaru 1.8 liter, then crashed. I need to replace the canard and firewall and thought maybe a new drawing would help get me going on the the effort.  So any SolidWorks drawing would be much appreciated. 
The bird has been hanging from the ceiling since 2005 and I finally have the house at a point where I can think about the QBird......200 hours of the most fun I have ever had in an airplane!
Dave






On Apr 27, 2020, at 5:01 PM, sky_kid1080 <fly-boy1080@...> wrote:


I have some of the plane drawn up in solidworks I’d be willing to team up with someone and get it finished up. I have my own Q2 to finish and I like to do things right the first time. Sorry I know this is an older message and I don’t respond often.

Thanks,
Brad
 
Sent from Mail for Windows 10
 
From: Jay Scheevel
Sent: Friday, April 24, 2020 3:42 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
If you read the part of the plans about installing the bulkheads, they allow the builder to vary the angle and size of that bulkhead to compensate for pilot size. There is also some variation allowed in the forward/back position of the main tank for the same reason.  I would just suggest rotating the base of the bulkhead backward until it intersects the fuselage. The original plan required a lot of cutting and fitting. The 4 fuselage shells were oversized and needed to be trimmed and there were no marks to help the builder do this, only small drawings. There was a lot of work involved to get a good fit between fuselage and bulkheads. No two of these planes are identical once they are complete.
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 1:21 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Yup, that’s right. Do you have a angel between the seat bulkhead top und bottom? Not sure which angle they should? Something else between 130° and 150° maybe?
 
Eugen

 

Am 24.04.2020 um 20:28 schrieb Jay Scheevel <jay@...>:
 
Your seatback bulkhead (the inclined portion) needs to intersect the bottom of the fuselage. 
 
Cheers,
Jay
 
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Eugen Pilarski
Sent: Friday, April 24, 2020 12:16 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Q2 Project
 
Here we go :-)

<image001.png>

<image002.png>
 

 

3641 - 3660 of 52821