Date   

Q200 Firewall Forward for Sale

Shaun Milke
 

I’m selling the firewall forward portion of my Q200 as I‘m converting to a different kind of engine.  I flew the airplane 30 hours from Toledo to Anchorage two years ago then found structural issues that caused me to store it until I could take it on as a project. I’d like to sell the whole thing as essentially a bolt on and run package for someone’s project. The only items that won’t be included are propeller (found dry rot crack in hub of Prince prop) and carburetor (removed and used as a core return for one of my other birds). The engine, accessories, exhaust, cowling, baffling, prop spacer, spinner, oil cooler, induction ducting, cabin/carb heaters, etc will be included.  The whole installation was done with minimal deviation to the Q200 plans and the engine is a stock but experiment O-200 (580 smoh by Ly-con).  Pics and logs available on request, I’m asking $14,000 obo for the package and may be willing to eventually sell the engine separately if I can’t find a buyer for the entire FWF.

Thanks,
Shaun


Re: Looking for Q200 Exhaust

Jim Patillo
 

Thanks Martin. I’m thinking about getting one as a spare. How much do you want for bit?

Jim

Sent from Outer Space


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Martin Skiby <mskiby@...>
Sent: Sunday, July 5, 2020 7:25:02 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Jim I have one also if anyone needs

Martin

 


On Jul 5, 2020, at 6:55 PM, Corbin via groups.io <c_geiser@...> wrote:

Jim, all yours.  I’ve found a 2-1 I’m going after.

Corbin

On Jul 5, 2020, at 8:52 PM, Jim Patillo <Logistics_engineering@...> wrote:


Hi Chris,

I’m
Interested if Corbin is not.

Jim
N46JP - Q200

Sent from Outer Space

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Sunday, July 5, 2020 5:29:01 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Hey Chris.  How much are you thinking?  I’m leaning heavily towards a 2-1 system based on some feedback.

Corbin

> On Jul 5, 2020, at 6:46 PM, Dorothea Keats <dkeats@...> wrote:
>
>  Corbin----------  This is it----------  Chris
>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> <P1040364.JPG>
> <P1040363.JPG>


--
Corbin
N33QR




--

Corbin 
N33QR


Re: Looking for Q200 Exhaust

Martin Skiby
 

Jim I have one also if anyone needs

Martin

 


On Jul 5, 2020, at 6:55 PM, Corbin via groups.io <c_geiser@...> wrote:

Jim, all yours.  I’ve found a 2-1 I’m going after.

Corbin

On Jul 5, 2020, at 8:52 PM, Jim Patillo <Logistics_engineering@...> wrote:


Hi Chris,

I’m
Interested if Corbin is not.

Jim
N46JP - Q200

Sent from Outer Space

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Sunday, July 5, 2020 5:29:01 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Hey Chris.  How much are you thinking?  I’m leaning heavily towards a 2-1 system based on some feedback.

Corbin

> On Jul 5, 2020, at 6:46 PM, Dorothea Keats <dkeats@...> wrote:
>
>  Corbin----------  This is it----------  Chris
>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> <P1040364.JPG>
> <P1040363.JPG>


--
Corbin
N33QR




--

Corbin 
N33QR


Re: Looking for Q200 Exhaust

Jim Patillo
 

Thanks Corbin.  2:1 should make for a lot easier ignition install.

Chris I’ve had a 4:1 exhaust for 20 years and really like it. How much would you want? My email is logistics_engineering@...

Regards,
Jim
N46JP Q200


Sent from Outer Space


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Sunday, July 5, 2020 6:55:03 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Jim, all yours.  I’ve found a 2-1 I’m going after.

Corbin

On Jul 5, 2020, at 8:52 PM, Jim Patillo <Logistics_engineering@...> wrote:


Hi Chris,

I’m
Interested if Corbin is not.

Jim
N46JP - Q200

Sent from Outer Space

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Sunday, July 5, 2020 5:29:01 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Hey Chris.  How much are you thinking?  I’m leaning heavily towards a 2-1 system based on some feedback.

Corbin

> On Jul 5, 2020, at 6:46 PM, Dorothea Keats <dkeats@...> wrote:
>
>  Corbin----------  This is it----------  Chris
>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> <P1040364.JPG>
> <P1040363.JPG>


--
Corbin
N33QR




--

Corbin 
N33QR


Re: Looking for Q200 Exhaust

Corbin
 

Jim, all yours.  I’ve found a 2-1 I’m going after.

Corbin

On Jul 5, 2020, at 8:52 PM, Jim Patillo <Logistics_engineering@...> wrote:


Hi Chris,

I’m
Interested if Corbin is not.

Jim
N46JP - Q200

Sent from Outer Space

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Sunday, July 5, 2020 5:29:01 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Hey Chris.  How much are you thinking?  I’m leaning heavily towards a 2-1 system based on some feedback.

Corbin

> On Jul 5, 2020, at 6:46 PM, Dorothea Keats <dkeats@...> wrote:
>
>  Corbin----------  This is it----------  Chris
>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> <P1040364.JPG>
> <P1040363.JPG>


--
Corbin
N33QR




--

Corbin 
N33QR


Re: Looking for Q200 Exhaust

Jim Patillo
 

Hi Chris,

I’m
Interested if Corbin is not.

Jim
N46JP - Q200

Sent from Outer Space


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Corbin via groups.io <c_geiser@...>
Sent: Sunday, July 5, 2020 5:29:01 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Looking for Q200 Exhaust
 
Hey Chris.  How much are you thinking?  I’m leaning heavily towards a 2-1 system based on some feedback.

Corbin

> On Jul 5, 2020, at 6:46 PM, Dorothea Keats <dkeats@...> wrote:
>
>  Corbin----------  This is it----------  Chris
>
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
>
> <P1040364.JPG>
> <P1040363.JPG>


--
Corbin
N33QR




Re: Looking for Q200 Exhaust

Corbin
 

Hey Chris. How much are you thinking? I’m leaning heavily towards a 2-1 system based on some feedback.

Corbin

On Jul 5, 2020, at 6:46 PM, Dorothea Keats <dkeats@...> wrote:

 Corbin---------- This is it---------- Chris



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



<P1040364.JPG>
<P1040363.JPG>
--
Corbin
N33QR


Re: Looking for Q200 Exhaust

Chris Walterson
 

Corbin----------  This is it----------  Chris



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: Keith Welsh's Quickie 1 Q-Tour - This Saturday, 9:00 CDT.

John Hoxie
 

Do we have an idea how many are going to Spring Fling next week?


On Sun, Jul 5, 2020 at 11:28 AM, Sam Hoskins
<sam.hoskins@...> wrote:
Join Keith as he does a walk-around of his award winning Q1, live from Terra Haute, IN. The link to the meeting is at the bottom of this email.  This session will be recorded and uploaded to YouTube.

Again, after Keith's Q-Tour ends, we can re-enter the Zoom meeting for an open mic session.

Coming up next month:
August 8, 2020 at 09:00 USA Central time.  Dave Dugas and his award winning Revmaster powered Q-2.

The Q-Tour response has been great.  If you are interested in presenting your aircraft or would like to request seeing someone else's plane that you may been following, drop me a note at sam.hoskins@...

Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: Keith Welsh Quickie 1 Q-Tour
Time: Saturday, July 11, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/72370836215?pwd=Ykg3NHp0MzFkSmdLMEN6OEJQeUF2Zz09
 
Meeting ID: 723 7083 6215
Password: 4PrUF1
 


Keith Welsh's Quickie 1 Q-Tour - This Saturday, 9:00 CDT.

Sam Hoskins
 

Join Keith as he does a walk-around of his award winning Q1, live from Terra Haute, IN. The link to the meeting is at the bottom of this email.  This session will be recorded and uploaded to YouTube.

Again, after Keith's Q-Tour ends, we can re-enter the Zoom meeting for an open mic session.

Coming up next month:
August 8, 2020 at 09:00 USA Central time.  Dave Dugas and his award winning Revmaster powered Q-2.

The Q-Tour response has been great.  If you are interested in presenting your aircraft or would like to request seeing someone else's plane that you may been following, drop me a note at sam.hoskins@...

Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: Keith Welsh Quickie 1 Q-Tour
Time: Saturday, July 11, 2020 09:00 AM Central Time (US and Canada)
 
Join Zoom Meeting
https://us04web.zoom.us/j/72370836215?pwd=Ykg3NHp0MzFkSmdLMEN6OEJQeUF2Zz09
 
Meeting ID: 723 7083 6215
Password: 4PrUF1
 


Re: Looking for Q200 Exhaust

Corbin
 

Hey Chris,

Is that a 4-1 or a 2-1? I’m starting to think I’ll need a 2-1 on each side due to my fuel injection setup.

Corbin

On Jul 4, 2020, at 8:12 PM, Dorothea Keats <dkeats@...> wrote:

 Corbin------------- I have the stock exhaust that cane with the Q200, Don't know if it will work for your application, but it is available.------------ Chris in canada


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



--
Corbin
N33QR


Re: Looking for Q200 Exhaust

Chris Walterson
 

Corbin-------------  I have the stock exhaust that cane with the Q200, Don't know if it will work for your application, but it is available.------------  Chris in canada


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: Looking for Q200 Exhaust

Martin Skiby
 

I have the 4-1 but I’m thinking back I think you may need a 2-1 because of where the 4-1 crossed over and it may interfere with your fuel injection system.



Martin

 


On Jul 4, 2020, at 5:44 PM, Martin Skiby <mskiby@...> wrote:

Corbin,  we have an original 4 into 1 system that came with the Q200 kit.   

PM me if you want it.
<image0.jpeg>


Martin

 


On Jul 4, 2020, at 5:26 PM, Mike Conlin via groups.io <conlin_m@...> wrote:


I have a 4 into 1 that could be used for a template.  It was on a q200 i flew in  the 80's. 



Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone


-------- Original message --------
From: "Corbin via groups.io" <c_geiser@...>
Date: 7/4/20 4:00 PM (GMT-06:00)
To: main@Q-List.groups.io
Subject: [Q-List] Looking for Q200 Exhaust

Does anyone have an exhaust system sitting around in a dark corner for sale?

My current exhaust set up is a cross over design that runs two pipes across and in front of engine (pics below).  I am installing the Light Speed Ignition system and the pick up plate hits the top exhaust with the current setup.  I will need to change my exhaust to a 2 in 1 on each side (or a 4 in 1) so that I can get the clearance for the mounting plate.  Klaus no longer makes or recommends the Hall effect for the mag hole so I am left with changing up the exhaust.

Before I go to the trouble of having exhaust made, I wanted to check to see if anyone has an exhaust system for sale.  Please let me know if you do and pictures always help.

Thanks,

Corbin

IMG_1652.jpegIMG_1656.jpegIMG_1653.jpeg   IMG_1658.jpeg
Corbin


Re: Looking for Q200 Exhaust

Martin Skiby
 

Corbin,  we have an original 4 into 1 system that came with the Q200 kit.   

PM me if you want it.

Martin

 


On Jul 4, 2020, at 5:26 PM, Mike Conlin via groups.io <conlin_m@...> wrote:


I have a 4 into 1 that could be used for a template.  It was on a q200 i flew in  the 80's. 



Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone


-------- Original message --------
From: "Corbin via groups.io" <c_geiser@...>
Date: 7/4/20 4:00 PM (GMT-06:00)
To: main@Q-List.groups.io
Subject: [Q-List] Looking for Q200 Exhaust

Does anyone have an exhaust system sitting around in a dark corner for sale?

My current exhaust set up is a cross over design that runs two pipes across and in front of engine (pics below).  I am installing the Light Speed Ignition system and the pick up plate hits the top exhaust with the current setup.  I will need to change my exhaust to a 2 in 1 on each side (or a 4 in 1) so that I can get the clearance for the mounting plate.  Klaus no longer makes or recommends the Hall effect for the mag hole so I am left with changing up the exhaust.

Before I go to the trouble of having exhaust made, I wanted to check to see if anyone has an exhaust system for sale.  Please let me know if you do and pictures always help.

Thanks,

Corbin

IMG_1652.jpegIMG_1656.jpegIMG_1653.jpeg   IMG_1658.jpeg
Corbin


Re: Looking for Q200 Exhaust

Mike Conlin
 

I have a 4 into 1 that could be used for a template.  It was on a q200 i flew in  the 80's. 



Sent via the Samsung Galaxy S7, an AT&T 4G LTE smartphone


-------- Original message --------
From: "Corbin via groups.io" <c_geiser@...>
Date: 7/4/20 4:00 PM (GMT-06:00)
To: main@Q-List.groups.io
Subject: [Q-List] Looking for Q200 Exhaust

Does anyone have an exhaust system sitting around in a dark corner for sale?

My current exhaust set up is a cross over design that runs two pipes across and in front of engine (pics below).  I am installing the Light Speed Ignition system and the pick up plate hits the top exhaust with the current setup.  I will need to change my exhaust to a 2 in 1 on each side (or a 4 in 1) so that I can get the clearance for the mounting plate.  Klaus no longer makes or recommends the Hall effect for the mag hole so I am left with changing up the exhaust.

Before I go to the trouble of having exhaust made, I wanted to check to see if anyone has an exhaust system for sale.  Please let me know if you do and pictures always help.

Thanks,

Corbin

IMG_1652.jpegIMG_1656.jpegIMG_1653.jpeg   IMG_1658.jpeg
Corbin


Looking for Q200 Exhaust

Corbin
 

Does anyone have an exhaust system sitting around in a dark corner for sale?

My current exhaust set up is a cross over design that runs two pipes across and in front of engine (pics below).  I am installing the Light Speed Ignition system and the pick up plate hits the top exhaust with the current setup.  I will need to change my exhaust to a 2 in 1 on each side (or a 4 in 1) so that I can get the clearance for the mounting plate.  Klaus no longer makes or recommends the Hall effect for the mag hole so I am left with changing up the exhaust.

Before I go to the trouble of having exhaust made, I wanted to check to see if anyone has an exhaust system for sale.  Please let me know if you do and pictures always help.

Thanks,

Corbin

IMG_1652.jpegIMG_1656.jpegIMG_1653.jpeg   IMG_1658.jpeg
Corbin

--

Corbin 
N33QR


Re: ADV:[Q-List] Fling thing

Bruce Crain
 

Whoop whoop!!
B
On Jul 1, 2020, at 8:16 PM, Kevin Boddicker <trumanst@...> wrote:

Jay,
Short answer. Yes.

On Wednesday 01/07/2020 at 10:32 am, Jay Scheevel wrote:

Hey Kevin,
Is the Fling still on for July 17-20?
Cheers,
Jay





____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

This FBI Team Probes 'Disruptions in the Spirit'
http://thirdpartyoffers.juno.com/TGL3131/5efd4925a5c849243d85st01vuc1
In This State, the Party's Over
http://thirdpartyoffers.juno.com/TGL3131/5efd492524c8949243d85st01vuc2
Fort Hood Soldier Kills Himself After Remains Found
http://thirdpartyoffers.juno.com/TGL3131/5efd49253f5b349243d85st01vuc3


Re: ADV:[Q-List] Fling thing

Kevin Boddicker
 

Jay,
Short answer. Yes.

On Wednesday 01/07/2020 at 10:32 am, Jay Scheevel wrote:

Hey Kevin,
Is the Fling still on for July 17-20?
Cheers,
Jay


Re: Placement Ideas for A/P Servo for Pitch Control

Jay Scheevel
 

Very nice wiring, Kevin. I am jealous.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin Sheeley via groups.io
Sent: Wednesday, July 01, 2020 5:25 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] Placement Ideas for A/P Servo for Pitch Control

 

Corbin,

 

See attached pictures for elevator servo. 155640 is the aileron servo.

 

My canopy hinges forward which give me easy access to my hinged instrument panel.

 

Kevin

 

On Monday, June 29, 2020, 08:09:22 PM EDT, Corbin via groups.io <c_geiser@...> wrote:

 

 

Thanks Kevin!  Would love to see your servo setup.

Corbin



On Jun 29, 2020, at 6:49 PM, Kevin Sheeley via groups.io <kjsheely1@...> wrote:



Corbin,

 

I will get some pictures for you this week. I can't seam to find mine.

 

BTW, I removed my spring bias system so now I use my reflexor for elevator pressure relief.

 

Kevin

 

On Monday, June 29, 2020, 10:04:32 AM EDT, Corbin via groups.io <c_geiser@...> wrote:

 

 

Thanks Jerry.  Appreciate it!

 

Corbin 


On June 29, 2020 at 9:03 AM, Jerry Marstall <jnmarstall@...> wrote:

Corbin,

I installed the Dynon D100 A/P back when the world was flat.  Next time to the airport I'll take pix for you.  My elevator control hookup has served me well.

Jerry Marstall 

 

-------- Original message --------

From: "Corbin via groups.io" <c_geiser@...>

Date: 6/29/20 9:41 AM (GMT-05:00)

Subject: [Q-List] Placement Ideas for A/P Servo for Pitch Control

 

I am planning out avionics upgrades and would like to consider having a pitch servo and not just roll.  Does anyone have any pics of their placement of the servo for the elevator controls?  I think most people just go with roll trim since the elevator trim is effective but hoping to see some examples of placement for the pitch servo for consideration.

 

Corbin

 

 


--

Corbin 
N33QR


--

Corbin 
N33QR


Re: Placement Ideas for A/P Servo for Pitch Control

Corbin
 

Awesome....thank you!  Those are interesting looking plates to mount with.  Are the holes to maximize the contact with the adhesive used?  What adhesive is that?  pic 155559 for reference.

Corbin 

On July 1, 2020 at 6:26 PM, "Kevin Sheeley via groups.io" <kjsheely1@...> wrote:


Corbin,

See attached pictures for elevator servo. 155640 is the aileron servo.

My canopy hinges forward which give me easy access to my hinged instrument panel.

Kevin

On Monday, June 29, 2020, 08:09:22 PM EDT, Corbin via groups.io <c_geiser@...> wrote:


Thanks Kevin!  Would love to see your servo setup.

Corbin

On Jun 29, 2020, at 6:49 PM, Kevin Sheeley via groups.io <kjsheely1@...> wrote:


Corbin,

I will get some pictures for you this week. I can't seam to find mine.

BTW, I removed my spring bias system so now I use my reflexor for elevator pressure relief.

Kevin

On Monday, June 29, 2020, 10:04:32 AM EDT, Corbin via groups.io <c_geiser@...> wrote:


Thanks Jerry.  Appreciate it!

Corbin 

On June 29, 2020 at 9:03 AM, Jerry Marstall <jnmarstall@...> wrote:

Corbin,
I installed the Dynon D100 A/P back when the world was flat.  Next time to the airport I'll take pix for you.  My elevator control hookup has served me well.
Jerry Marstall 

-------- Original message --------
From: "Corbin via groups.io" <c_geiser@...>
Date: 6/29/20 9:41 AM (GMT-05:00)
Subject: [Q-List] Placement Ideas for A/P Servo for Pitch Control

I am planning out avionics upgrades and would like to consider having a pitch servo and not just roll.  Does anyone have any pics of their placement of the servo for the elevator controls?  I think most people just go with roll trim since the elevator trim is effective but hoping to see some examples of placement for the pitch servo for consideration.


Corbin




--

Corbin 
N33QR

--

Corbin 
N33QR




--

Corbin 
N33QR

5461 - 5480 of 55057