Date   

Re: New to Quickies

Phillip
 

There are list of tools but not pieces and parts of the plane i.e. 4 blocks of foam 52”x36”x18”, 24 fine thread number 32 screws 


On Oct 1, 2020, at 9:11 AM, Brian Larick <blarick@...> wrote:

 Cody, if you need a full set of cores let me know.  I think it might be good to go back to Eureka with an order of 2 for pricing.  He has a strong reputation.

Brian

On Oct 1, 2020, at 08:42, Phillip <Rayphillip123@...> wrote:

 Cody,
I’m working on a Q200 partially built. My kit did not have a backing list with it. I’m looking for the list of all plane parts. Thanks. 
Phillip


On Sep 30, 2020, at 9:00 PM, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


File /Item_packing_slips_Q2_Q200_Tri-Q_conversion_1984.pdf uploaded #file-notice

main@Q-List.groups.io Notification <noreply@...>
 

The following files have been uploaded to the Files area of the main@Q-List.groups.io group.

By: Jay Scheevel

Description:
Original item packing lists for Q2 kit with Q200 upgrade from 1984 for N8WQ SN 2864


Re: New to Quickies

Jay Scheevel
 

I have loaded a pdf to the files section with complete packing lists for my complete Q200 kit.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Brian Larick
Sent: Thursday, October 01, 2020 6:52 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] New to Quickies

 

Philip.  I have packing lists.  There are several.  Any in particular?  

Also, I believe there are packing lists in the Q-list files...

 

If someone knows they’re not here, Let me know and I’ll dig out mine for upload.

Brian



On Oct 1, 2020, at 08:42, Phillip <Rayphillip123@...> wrote:

 Cody,

I’m working on a Q200 partially built. My kit did not have a backing list with it. I’m looking for the list of all plane parts. Thanks. 

Phillip



On Sep 30, 2020, at 9:00 PM, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


Re: New to Quickies

Brian Larick
 

Cody, if you need a full set of cores let me know.  I think it might be good to go back to Eureka with an order of 2 for pricing.  He has a strong reputation.

Brian

On Oct 1, 2020, at 08:42, Phillip <Rayphillip123@...> wrote:

 Cody,
I’m working on a Q200 partially built. My kit did not have a backing list with it. I’m looking for the list of all plane parts. Thanks. 
Phillip


On Sep 30, 2020, at 9:00 PM, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


Re: New to Quickies

Brian Larick
 

Philip.  I have packing lists.  There are several.  Any in particular?  
Also, I believe there are packing lists in the Q-list files...

If someone knows they’re not here, Let me know and I’ll dig out mine for upload.

Brian

On Oct 1, 2020, at 08:42, Phillip <Rayphillip123@...> wrote:

 Cody,
I’m working on a Q200 partially built. My kit did not have a backing list with it. I’m looking for the list of all plane parts. Thanks. 
Phillip


On Sep 30, 2020, at 9:00 PM, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


Re: New to Quickies

Phillip
 

Cody,
I’m working on a Q200 partially built. My kit did not have a backing list with it. I’m looking for the list of all plane parts. Thanks. 
Phillip


On Sep 30, 2020, at 9:00 PM, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


Re: New to Quickies

 

I called Eureka CNC he said hes changed his machine and wasn't sure if he was interested in cutting quickie wings anymore. He hadn't transferred the numbers to his new machine. But I called Mohr composites? Up in Maryland, hes cut some wings for experimental and quickies at that. So I'm waiting on his quote. 


On Wed, Sep 30, 2020, 23:29 Jay Scheevel <jay@...> wrote:
Hi Cody,
Build per plans with glass. If you use carbon fiber you need to do a complete engineering analysis. There could be unintended stress concentrations or failure modes that can only be identified with an engineering evaluation. The plane can be a built quite light without resorting to alternative materials.

Cheers,
Jay

Sent from my Verizon Wireless 4G LTE DROID


Cody <cody.craig1985@...> wrote:

Well, I've decided to give it a go. I have already watched both those videos twice before joining this forum. I'll probably watch them a few more times before I start the project. I have questions about fiberglass strength, carbon fiber etc. I know carbons expensive as all get out. Bidirectional cloth seems easy to find. The unicloth seems harder. Aircraft spruce is kind of expensive. Are there other sources to consider? 


Re: I missed this one!

Corbin
 

I am fairly certain that a friend of mine knows this guy.  I’ll check today.  

Corbin

On Oct 1, 2020, at 1:23 AM, Jim Patillo <Logistics_engineering@...> wrote:


http://www.kathrynsreport.com/2019/10/loss-of-engine-power-partial-quickie.html?m=1


I don’t remember this accident. Does anyone know this fella?

Jim
N46JP Q200

--

Corbin 
N33QR


I missed this one!

Jim Patillo
 

http://www.kathrynsreport.com/2019/10/loss-of-engine-power-partial-quickie.html?m=1


I don’t remember this accident. Does anyone know this fella?

Jim
N46JP Q200


Re: New to Quickies

Jay Scheevel
 

Hi Cody,
Build per plans with glass. If you use carbon fiber you need to do a complete engineering analysis. There could be unintended stress concentrations or failure modes that can only be identified with an engineering evaluation. The plane can be a built quite light without resorting to alternative materials.

Cheers,
Jay

Sent from my Verizon Wireless 4G LTE DROID


Cody <cody.craig1985@...> wrote:

Well, I've decided to give it a go. I have already watched both those videos twice before joining this forum. I'll probably watch them a few more times before I start the project. I have questions about fiberglass strength, carbon fiber etc. I know carbons expensive as all get out. Bidirectional cloth seems easy to find. The unicloth seems harder. Aircraft spruce is kind of expensive. Are there other sources to consider? 


Re: New to Quickies

Brian Larick
 

Cody are you getting a quote from Eureka CNC?  Last I talked to him Quickie Q200 was a custom as he’d rebuilt his machine.

Anyway, be interested in the number depending on what you asked for.  I.e.  All hot wire cores or just some?  Maybe do a combo deal and split the setup cost.



Brian

On Sep 30, 2020, at 22:10, Cody <cody.craig1985@...> wrote:

Well, I've decided to give it a go. I have already watched both those videos twice before joining this forum. I'll probably watch them a few more times before I start the project. I have questions about fiberglass strength, carbon fiber etc. I know carbons expensive as all get out. Bidirectional cloth seems easy to find. The unicloth seems harder. Aircraft spruce is kind of expensive. Are there other sources to consider? 


Re: New to Quickies

 

Well, I've decided to give it a go. I have already watched both those videos twice before joining this forum. I'll probably watch them a few more times before I start the project. I have questions about fiberglass strength, carbon fiber etc. I know carbons expensive as all get out. Bidirectional cloth seems easy to find. The unicloth seems harder. Aircraft spruce is kind of expensive. Are there other sources to consider? 


Re: New to Quickies

Jay Scheevel
 

Hi Cody,

 

Wing foam is available from Aircraft Spruce. Same wing foam and glass as the long-EZ.

Watch the following videos to know what you are getting into.

https://www.youtube.com/watch?v=-5nNadZKI6s

https://www.youtube.com/watch?v=1ZYc1nyhJdc

 

Then read the following:

http://n8wq.scheevel.com/documents/RAF_composite_education_section_from_Q2Plans.pdf

 

Once you have decided this type of project is what you want to commit to, then start asking questions from this group, and there will be lots of good information coming your way.

 

If you decide to build, make sure you use a proper respirator and protective gloves and clothing right from the start (which was not done in the early days and a lot of people became sensitized to the epoxy and had to quit because of allergic rashes)

 

Cheers,

Jay Scheevel, Tri-Q2 builder

 

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Brian Larick
Sent: Wednesday, September 30, 2020 6:26 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] New to Quickies

 

Welcome Cody.  There’s a ton of info here and knowledge as well.  I have a similar kit that I still need to start on.  

 

Basics are:

Build to plans

Read the newsletters

Start with the intro to building in the instructions to gain skill with construction.

Do the “six pack” mods

Do a little every day.

This group is fantastic

Also

Canardzone

Quickheads

Others.

Check out Corbin’s “Quirky” videos any others on YouTube

 

Have fun I hope to do the same.

 

 

Brian



On Sep 30, 2020, at 20:16, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


Re: New to Quickies

 

So far I've hit all the sites and videos. Watched Burt Rutans composite instructions. Tried sourcing cnc foam cores. (Waiting on quotes)  found damage to a spar on the outboard end, and watched a quickie rebuild playlist on YouTube ad well


Re: New to Quickies

Brian Larick
 

Welcome Cody.  There’s a ton of info here and knowledge as well.  I have a similar kit that I still need to start on.  

Basics are:
Build to plans
Read the newsletters
Start with the intro to building in the instructions to gain skill with construction.
Do the “six pack” mods
Do a little every day.
This group is fantastic
Also
Canardzone
Quickheads
Others.
Check out Corbin’s “Quirky” videos any others on YouTube

Have fun I hope to do the same.



Brian

On Sep 30, 2020, at 20:16, Cody <cody.craig1985@...> wrote:

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


New to Quickies

 

Head I'm an Avionics Manager in Bartlesville, OK. A friend of mine just gave me a quickie Q200 kit less engine and wing foams. I'm going to need some help and tips on how to start this thing so I don't get frustrated and quit. This is my chance to make an airplane to be proud of without the frustrating mistakes of typed airplanes hopefully. PLEASE HELP!


Re: Quickie Aircraft Pictures!!! ❤️

Rodney Herzig
 

🙏🙏


On Sep 30, 2020, at 12:50 AM, Bruce Crain <jcrain2@...> wrote:

 Absolutely!  Our pleasure!  And you are our overall winner this year!  That’s a really nice Cozy III!
Bruce


On Sep 29, 2020, at 1:23 PM, Rodney Herzig <zzigster@...> wrote:

 Great pictures Rachel! Thanks for the great time Bruce and Joanne😬

Rod Herzig 


On Sep 28, 2020, at 4:00 PM, Bruce Crain <jcrain2@...> wrote:

 Hey bump into the url to see bunches of Quickie pictures!  Rachel Faruque posted all of the Field Of Dreams pics and more!!  You’re gonna love it!  Thank Rachel!! 
Bruce






Re: Quickie Aircraft Pictures!!! ❤️

Bruce Crain
 

Absolutely!  Our pleasure!  And you are our overall winner this year!  That’s a really nice Cozy III!
Bruce


On Sep 29, 2020, at 1:23 PM, Rodney Herzig <zzigster@...> wrote:

 Great pictures Rachel! Thanks for the great time Bruce and Joanne😬

Rod Herzig 


On Sep 28, 2020, at 4:00 PM, Bruce Crain <jcrain2@...> wrote:

 Hey bump into the url to see bunches of Quickie pictures!  Rachel Faruque posted all of the Field Of Dreams pics and more!!  You’re gonna love it!  Thank Rachel!! 
Bruce






Re: Canopies

Jay Foss
 

Hello Jim. 
Right on. Ok thanks , I have emailed him a couple times and didn’t get an answer 


On Sep 29, 2020, at 5:52 PM, Jim Patillo <Logistics_engineering@...> wrote:


Hi Jay, he quoted $895.00 crated and ready to ship.

Jim
N46JP Q200

Sent from Outer Space

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Foss via groups.io <fossjay111@...>
Sent: Tuesday, September 29, 2020 4:01:23 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Canopies
 
Any chance he gave you a price? 


On Sep 29, 2020, at 4:32 PM, Jim Patillo <Logistics_engineering@...> wrote:



FYI,

Thanks for the lead Sam.

I  made contact with Jeff at American Plastics. They are still in business. 40 years now.

He can make clear and smoked canopies for Q1, Q2, Q200 and Tri -Q  as well as Eze’s and Velocities. 6-8 weeks lead time. He is a real nice fella. My smoked canopy still looks good but starting to get a little crazing  after 1700 hours +.

I tried micro-ing it out but is to deep in the plastic. Jeff said it’s in the first 20% of thickness and is mainly in the front. You can only see the crazing in certain light situations. Otherwise canopy optical is Clear and totally smooth inside and out.

Jim
N46JP - Q200
First flown August 2000.
Flown in 26 states!

 

 


Re: Canopies

Jim Patillo
 

Hi Jay, he quoted $895.00 crated and ready to ship.

Jim
N46JP Q200

Sent from Outer Space


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Foss via groups.io <fossjay111@...>
Sent: Tuesday, September 29, 2020 4:01:23 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Canopies
 
Any chance he gave you a price? 


On Sep 29, 2020, at 4:32 PM, Jim Patillo <Logistics_engineering@...> wrote:



FYI,

Thanks for the lead Sam.

I  made contact with Jeff at American Plastics. They are still in business. 40 years now.

He can make clear and smoked canopies for Q1, Q2, Q200 and Tri -Q  as well as Eze’s and Velocities. 6-8 weeks lead time. He is a real nice fella. My smoked canopy still looks good but starting to get a little crazing  after 1700 hours +.

I tried micro-ing it out but is to deep in the plastic. Jeff said it’s in the first 20% of thickness and is mainly in the front. You can only see the crazing in certain light situations. Otherwise canopy optical is Clear and totally smooth inside and out.

Jim
N46JP - Q200
First flown August 2000.
Flown in 26 states!

 

 

2661 - 2680 of 52982