Date   

Re: Ram Air Vent Tube and Pitot Tube Cover

Corbin <c_geiser@...>
 

Ahh....thanks!  I will hunt that article down this week!
--

Corbin 
N33QR


Re: Ram Air Vent Tube and Pitot Tube Cover

Michael Dunning
 

Corbin,

If you subscribe to Kitplanes, they actually had a DIY article on how to make your own covers a few years back.
--
-MD
#2827 (still thinking about planning on visualizing how to finish building)


Re: Flight report

Dustin Graber
 

I seldom write anything, but it's stories like this that keep me building.
Dustin Graber

On Dec 6, 2020 1:24 PM, Bruce Crain <jcrain2@...> wrote:
Living vicariously thru you two!  Say, isn’t 35 F like a heat wave in the northern climes?
Bruce


On Dec 6, 2020, at 11:45 AM, Rodney Herzig <zzigster@...> wrote:

 Thanks for sharing Kevin. I felt like I was right there with you guys 😎🍺

Rodney 


On Dec 6, 2020, at 6:35 AM, Jerry Marstall <jnmarstall@...> wrote:

 Great report Kev. Glad yo guys are sneaking in some air time between storms and cold. Jerry 

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 12/6/20 11:27 AM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Flight report

Nice report, Kevin,

Thanks for the excellent visuals. You should become an author!

Cheers,
Jay

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin Boddicker
Sent: Sunday, December 06, 2020 7:19 AM
To: Q List <Q-List@groups.io>
Subject: [Q-List] Flight report

5 Dec 20

Recieved an email from Paul Fisher asking what I was doing. Flying somewhere I guess.
As it turned out Paul flew to DEH from DVN. Landed about 11:00 AM. He made a prefect landing. Calm winds and 35°F.
We had a bite of lunch as my plane was being preheated, fumed, preflighted.
High thin overcast clearing with breaks, so some sunshine. Important because the cockpit is a lot more comfortable with sunshine at this temp.
Fired up about 12:30PM.
Mission is to fly with Paul half way to DVN formation. Th twist is I was going to do the formation flying and Paul was going to lead.
We fly this way a lot, but I always lead. Only tried to follow once before, on the way home from FOD Emporia. We quickly changed as I didn’t preform well.
Not much change this time. Closest I got was 500’. Farthest was half mile. Being coached by Paul did help, but I think its best I stick to lead.
We parted ways and flew to our home airports.
Made a good landing myself!
Excellent day for flying, trying a new challenge, and enjoying the gift of aviation!!

Hope this spurs some activity from the group. Been too quite lately. Let’s hear it!!!





Kevin Boddicker
TriQ 200 N7868B   542 hrs
Luana, IA.



















Re: Gypsy Wind

Bruce Crain
 

Movin’ and shakin’!  Sit in it and make some engine noises!  🤣
Bruce


On Dec 6, 2020, at 6:56 PM, Cody <cody.craig1985@...> wrote:

I haven't thrown out the old stuff, but it's not going to be used on this plane. That's another reason glass isn't laid yet. I figured I should get a lot of prep work completed and cleaned before really taping things together. 



Re: Gypsy Wind

 

I haven't thrown out the old stuff, but it's not going to be used on this plane. That's another reason glass isn't laid yet. I figured I should get a lot of prep work completed and cleaned before really taping things together. 


Re: Gypsy Wind

Jay Scheevel
 

Very nice work Cody! Please tell me that you have thrown out that nasty old epoxy and will be using some new stuff (I use AeroPoxy for structural layups)

Cheers,
Jay


On Dec 6, 2020, at 5:24 PM, Cody <cody.craig1985@...> wrote:

Gypsy Wind,

She is straightening up, lining out, showing smooth lines and feeling loved. I haven't laid fresh glass on her yet, when we fitted the shells together I noticed a 2 1/2" warp between the top and bottom fuselage shells. I decided I needed a laser level, 3ft steel rules, math and some straps. I started by slowly bending the bottom back into straight using lead shot bags and a spare battery. Checked my lines with the laser level and started marking waterline. Then I set the top down and ratchet strapped it straight. While everythings strapped and straight I figured I'd check the canopy cut lines. Close but not quite, so I cleaned up the previous cut and now the canopy "clicks" into place in the fuselage. I decided to mock in the firewall and FS94 bulkhead and Mark where I need to sand and clean for fresh glass. Next step is to pressure wash the shells and get all the dirt, grime, mold, etc out of there. Once Gypsy is prepped, we plan on a layup party on a Friday night in the paint booth. I can keep her at a nice 80-90 degrees until Sunday and then set her back in the cold shop. 
<received_1073074113168001.jpeg>
<received_1696008877243319.jpeg>
<received_882696915802744.jpeg>
<received_760283617915750.jpeg>
<received_401932467620428.jpeg>
<received_288181095950283.jpeg>
<received_4777742932268198.jpeg>
<received_727420531211371.jpeg>
<received_293310992025757.jpeg>
<received_378253796595102.jpeg>
<received_480525446246826.jpeg>
<received_184349203342579.jpeg>
<received_305102150658188.jpeg>
<received_425909198817643.jpeg>
<received_2691079287871676.jpeg>
<received_131674218509295.jpeg>
<received_2935828863319179.jpeg>
<received_711264866196386.jpeg>
<received_681669005866146.jpeg>
<received_1020101745154894.jpeg>


Gypsy Wind

 

Gypsy Wind,

She is straightening up, lining out, showing smooth lines and feeling loved. I haven't laid fresh glass on her yet, when we fitted the shells together I noticed a 2 1/2" warp between the top and bottom fuselage shells. I decided I needed a laser level, 3ft steel rules, math and some straps. I started by slowly bending the bottom back into straight using lead shot bags and a spare battery. Checked my lines with the laser level and started marking waterline. Then I set the top down and ratchet strapped it straight. While everythings strapped and straight I figured I'd check the canopy cut lines. Close but not quite, so I cleaned up the previous cut and now the canopy "clicks" into place in the fuselage. I decided to mock in the firewall and FS94 bulkhead and Mark where I need to sand and clean for fresh glass. Next step is to pressure wash the shells and get all the dirt, grime, mold, etc out of there. Once Gypsy is prepped, we plan on a layup party on a Friday night in the paint booth. I can keep her at a nice 80-90 degrees until Sunday and then set her back in the cold shop. 


Re: progress

Bruce Crain
 

Nice! Way to go Chris! Making lots of progress!
Bruce Crain
On Dec 6, 2020, at 3:08 PM, Dorothea Keats <dkeats@...> wrote:

 Just finished cleaning the shop. I finally have the wing removed from the table and hanging from the ceiling, Have the fuselage removed from the build table and doing a bit of filling on the fuselage to tail connection.

The canard has been removed from the build table and because I had jigging blocks attached to the bottom, I put the canard on the floor, leveled it and installed the addition 1 degree of incidence and then bondoed the blocks to the floor. I've done this before and find it easier to move the fuselage to the canard than to lift the canard to the fuselage. Hope to install the airfoils permanentley soon.

I also finished the landing gear I had made. It is the steel spring gear. Made the wheel pants and fairings and layed on the first coat of primmer. The assemble in the middle is the complete unit and the other pieces are what goes into building it. The brakes I am using are from Sonnex. Nice units. The complete weight with fairings, brakes, gear and wheels is 20 lbs per side. I am confident I am going to be much heavier than most Q's with my Subaru installed , so although the gear may be a bit heavy , it will be very robust.

Still having fun--------------- Chris



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus





<P1040988.JPG>
<P1040979.JPG>
<P1040985.JPG>
____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

The Zappos Visionary Was 'in Trouble' When He Died
http://thirdpartyoffers.juno.com/TGL3131/5fcd6d9cdcc26d9a169est02vuc1
Giuliani Has Tested Positive for COVID-19, Trump Says
http://thirdpartyoffers.juno.com/TGL3131/5fcd6d9c319076d9a169est02vuc2
Anti-Lockdown Bar Owner Hit Deputy With His Car: Cops
http://thirdpartyoffers.juno.com/TGL3131/5fcd6d9c54dbf6d9a169est02vuc3


Saturday's Q-Tour - Matthew Curcio's Well Traveled Q-200 December 12 - 0900 Central Time

Sam Hoskins
 

This month's Q-Tour features Matthew Curcio.  I met Matthew at Oshkosh and he had just acquired a Q-200 and was living in Ohio. He got the plane up and running and got a job at Scaled Composites. Since then, he has flown in each of the lower 48 states and also to Barrow, Alaska. He made several modifications to turn his Q-200 into a real long distance plane.This will be a really interesting Q-tour, be sure to join us. The log-in link is at the bottom of this email.

The January Tour will star Corbin Geiser. Corbin also acquired a previously built Q-200, and like the rest of us, is making improvements to the aircraft. After he purchased it, he did all the right things to get ready to fly his new toy, and he is reaping the rewards.

Sam Hoskins is inviting you to a scheduled Zoom meeting.
 
Topic: Matthew Curcio #Q-Tour
Time: Dec 12, 2020 09:00 AM Central Time (US and Canada) 
 
Join Zoom Meeting
https://us04web.zoom.us/j/72984066294?pwd=aGI1MXV6N0E2dWVJU2FsbldoL091QT09
 
Meeting ID: 729 8406 6294
Passcode: 7bik6e
 


progress

Chris Walterson
 

Just finished cleaning the shop. I finally have the wing removed from the table and hanging from the ceiling, Have the fuselage removed from the build table and doing a bit of filling on the fuselage to tail connection.

The canard has been removed from the build table and because I had jigging blocks attached to the bottom, I put the canard on the floor, leveled it and installed the addition 1 degree of incidence and then bondoed the blocks to the floor.  I've done this before and find it easier to move the fuselage to the canard than to lift the canard to the fuselage. Hope to install the airfoils permanentley soon.

 I also finished the landing gear I had made. It is the steel spring gear. Made the wheel pants and fairings and layed on the first coat of primmer.   The assemble in the middle is the complete unit and the other pieces are what goes into building it.  The brakes I am using are from Sonnex. Nice units.  The complete weight with fairings, brakes, gear and wheels is 20 lbs per side.  I  am confident I am going to be much heavier than most Q's with my Subaru installed , so although the gear may be a bit heavy , it will be very robust.

Still having fun---------------  Chris



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


New Tri Q200 Pilot!!

Bruce Crain
 

Thought I’d let you all know there is a “new Quickie Sheriff” out there in the southern US! Pete Stein and a myself flailed the skies around Enid Woodring Airport with a sortie to Stearman field for lunch one day. A bit less than 4 hours right seat and Pete can now land my TriQ better than I! Plus keep ‘er straight down the runway taxi runs!
He bought a beautiful lavender/white TriQ in Gilespie field in California! Pete is one of the best at handling my TriQ! Expecting big things and hopefully trips to see each other in the future. I will let Pete send pics or videos if he likes.
Bruce Crain
N96BJ
____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

DNA Leads to Mother's Arrest in 2003 Slaying of Twins
http://thirdpartyoffers.juno.com/TGL3131/5fcd3222593fb32217bd9st04vuc1
Death Toll Is at Least 7 After Rule-Breaking Wedding
http://thirdpartyoffers.juno.com/TGL3131/5fcd32227cb0332217bd9st04vuc2
SNL Goes to Town on Giuliani's Hearing
http://thirdpartyoffers.juno.com/TGL3131/5fcd3222a00b632217bd9st04vuc3


Re: Flight report

Bruce Crain
 

Living vicariously thru you two!  Say, isn’t 35 F like a heat wave in the northern climes?
Bruce


On Dec 6, 2020, at 11:45 AM, Rodney Herzig <zzigster@...> wrote:

 Thanks for sharing Kevin. I felt like I was right there with you guys 😎🍺

Rodney 


On Dec 6, 2020, at 6:35 AM, Jerry Marstall <jnmarstall@...> wrote:

 Great report Kev. Glad yo guys are sneaking in some air time between storms and cold. Jerry 

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 12/6/20 11:27 AM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Flight report

Nice report, Kevin,

Thanks for the excellent visuals. You should become an author!

Cheers,
Jay

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin Boddicker
Sent: Sunday, December 06, 2020 7:19 AM
To: Q List <Q-List@groups.io>
Subject: [Q-List] Flight report

5 Dec 20

Recieved an email from Paul Fisher asking what I was doing. Flying somewhere I guess.
As it turned out Paul flew to DEH from DVN. Landed about 11:00 AM. He made a prefect landing. Calm winds and 35°F.
We had a bite of lunch as my plane was being preheated, fumed, preflighted.
High thin overcast clearing with breaks, so some sunshine. Important because the cockpit is a lot more comfortable with sunshine at this temp.
Fired up about 12:30PM.
Mission is to fly with Paul half way to DVN formation. Th twist is I was going to do the formation flying and Paul was going to lead.
We fly this way a lot, but I always lead. Only tried to follow once before, on the way home from FOD Emporia. We quickly changed as I didn’t preform well.
Not much change this time. Closest I got was 500’. Farthest was half mile. Being coached by Paul did help, but I think its best I stick to lead.
We parted ways and flew to our home airports.
Made a good landing myself!
Excellent day for flying, trying a new challenge, and enjoying the gift of aviation!!

Hope this spurs some activity from the group. Been too quite lately. Let’s hear it!!!





Kevin Boddicker
TriQ 200 N7868B   542 hrs
Luana, IA.


















Re: Flight report

Rodney Herzig
 

Thanks for sharing Kevin. I felt like I was right there with you guys 😎🍺

Rodney 


On Dec 6, 2020, at 6:35 AM, Jerry Marstall <jnmarstall@...> wrote:

 Great report Kev. Glad yo guys are sneaking in some air time between storms and cold. Jerry 

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 12/6/20 11:27 AM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Flight report

Nice report, Kevin,

Thanks for the excellent visuals. You should become an author!

Cheers,
Jay

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin Boddicker
Sent: Sunday, December 06, 2020 7:19 AM
To: Q List <Q-List@groups.io>
Subject: [Q-List] Flight report

5 Dec 20

Recieved an email from Paul Fisher asking what I was doing. Flying somewhere I guess.
As it turned out Paul flew to DEH from DVN. Landed about 11:00 AM. He made a prefect landing. Calm winds and 35°F.
We had a bite of lunch as my plane was being preheated, fumed, preflighted.
High thin overcast clearing with breaks, so some sunshine. Important because the cockpit is a lot more comfortable with sunshine at this temp.
Fired up about 12:30PM.
Mission is to fly with Paul half way to DVN formation. Th twist is I was going to do the formation flying and Paul was going to lead.
We fly this way a lot, but I always lead. Only tried to follow once before, on the way home from FOD Emporia. We quickly changed as I didn’t preform well.
Not much change this time. Closest I got was 500’. Farthest was half mile. Being coached by Paul did help, but I think its best I stick to lead.
We parted ways and flew to our home airports.
Made a good landing myself!
Excellent day for flying, trying a new challenge, and enjoying the gift of aviation!!

Hope this spurs some activity from the group. Been too quite lately. Let’s hear it!!!





Kevin Boddicker
TriQ 200 N7868B   542 hrs
Luana, IA.
















Re: Flight report

Jerry Marstall <jnmarstall@...>
 

Great report Kev. Glad yo guys are sneaking in some air time between storms and cold. Jerry 

-------- Original message --------
From: Jay Scheevel <jay@...>
Date: 12/6/20 11:27 AM (GMT-05:00)
To: main@Q-List.groups.io
Subject: Re: [Q-List] Flight report

Nice report, Kevin,

Thanks for the excellent visuals. You should become an author!

Cheers,
Jay

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin Boddicker
Sent: Sunday, December 06, 2020 7:19 AM
To: Q List <Q-List@groups.io>
Subject: [Q-List] Flight report

5 Dec 20

Recieved an email from Paul Fisher asking what I was doing. Flying somewhere I guess.
As it turned out Paul flew to DEH from DVN. Landed about 11:00 AM. He made a prefect landing. Calm winds and 35°F.
We had a bite of lunch as my plane was being preheated, fumed, preflighted.
High thin overcast clearing with breaks, so some sunshine. Important because the cockpit is a lot more comfortable with sunshine at this temp.
Fired up about 12:30PM.
Mission is to fly with Paul half way to DVN formation. Th twist is I was going to do the formation flying and Paul was going to lead.
We fly this way a lot, but I always lead. Only tried to follow once before, on the way home from FOD Emporia. We quickly changed as I didn’t preform well.
Not much change this time. Closest I got was 500’. Farthest was half mile. Being coached by Paul did help, but I think its best I stick to lead.
We parted ways and flew to our home airports.
Made a good landing myself!
Excellent day for flying, trying a new challenge, and enjoying the gift of aviation!!

Hope this spurs some activity from the group. Been too quite lately. Let’s hear it!!!





Kevin Boddicker
TriQ 200 N7868B   542 hrs
Luana, IA.
















Re: Flight report

Jay Scheevel
 

Nice report, Kevin,

Thanks for the excellent visuals. You should become an author!

Cheers,
Jay

-----Original Message-----
From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Kevin Boddicker
Sent: Sunday, December 06, 2020 7:19 AM
To: Q List <Q-List@groups.io>
Subject: [Q-List] Flight report

5 Dec 20

Recieved an email from Paul Fisher asking what I was doing. Flying somewhere I guess.
As it turned out Paul flew to DEH from DVN. Landed about 11:00 AM. He made a prefect landing. Calm winds and 35°F.
We had a bite of lunch as my plane was being preheated, fumed, preflighted.
High thin overcast clearing with breaks, so some sunshine. Important because the cockpit is a lot more comfortable with sunshine at this temp.
Fired up about 12:30PM.
Mission is to fly with Paul half way to DVN formation. Th twist is I was going to do the formation flying and Paul was going to lead.
We fly this way a lot, but I always lead. Only tried to follow once before, on the way home from FOD Emporia. We quickly changed as I didn’t preform well.
Not much change this time. Closest I got was 500’. Farthest was half mile. Being coached by Paul did help, but I think its best I stick to lead.
We parted ways and flew to our home airports.
Made a good landing myself!
Excellent day for flying, trying a new challenge, and enjoying the gift of aviation!!

Hope this spurs some activity from the group. Been too quite lately. Let’s hear it!!!





Kevin Boddicker
TriQ 200 N7868B 542 hrs
Luana, IA.


Flight report

Kevin Boddicker
 

5 Dec 20

Recieved an email from Paul Fisher asking what I was doing. Flying somewhere I guess.
As it turned out Paul flew to DEH from DVN. Landed about 11:00 AM. He made a prefect landing. Calm winds and 35°F.
We had a bite of lunch as my plane was being preheated, fumed, preflighted.
High thin overcast clearing with breaks, so some sunshine. Important because the cockpit is a lot more comfortable with sunshine at this temp.
Fired up about 12:30PM.
Mission is to fly with Paul half way to DVN formation. Th twist is I was going to do the formation flying and Paul was going to lead.
We fly this way a lot, but I always lead. Only tried to follow once before, on the way home from FOD Emporia. We quickly changed as
I didn’t preform well.
Not much change this time. Closest I got was 500’. Farthest was half mile. Being coached by Paul did help, but I think its best
I stick to lead.
We parted ways and flew to our home airports.
Made a good landing myself!
Excellent day for flying, trying a new challenge, and enjoying the gift of aviation!!

Hope this spurs some activity from the group. Been too quite lately. Let’s hear it!!!





Kevin Boddicker
TriQ 200 N7868B 542 hrs
Luana, IA.


Re: Q1 parts

Hot Wings
 

Just joined this group today and saw this post.

I do have the Q-1 in 2D CAD and at one time a set of full size prints for the metal parts and templates.  I still have the files but my plotter died and I don't have the desire to distribute them.  The last time I did they were scanned, poorly, and offered on eBay.  The DXF of that scan were at one time in the files section of the old Yahoo group. 

The DXF for the Q-2 foils I posted a long time ago were CAD generated and offset for the thickness of the laminations.

If I get my engine project finished (see post in the Q-1 sub group) I'll put the metal parts sets I have setting on the shelf on the market.  Consider my efforts nothing more than vaporware until they are complete.
============
Leon


Re: Sparrow strainers

 

This sounds like featherfill primer. If you look it up its good for small buildup for sanding/finishing etc. 


Re: Sparrow strainers

Chris Walterson
 

Another question.  As an experiment, I took some normal primer and thinned it out considerabley and then added micro to thicken it up. I then painted a piece of aluminum with two coats. Two days later , I  sanded and it came out well. Kind of like a poor mans fill and sand. I haven't tried to spray it yet, but  I am sure it will also go on nicely with a foam roller. You should be able to build any low areas without concern of over spray. I just did the third thin coat of micro and then on to primer. Any thoughts??

Don't be shy to voice your opinions.    Thanks   Chris


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: Sparrow strainers

Jerry Marstall <jnmarstall@...>
 

Uh huh 

-------- Original message --------
From: Kevin Boddicker <trumanst@...>
Date: 11/26/20 12:19 PM (GMT-05:00)
To: "main@q-list.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Sparrow strainers

That was going to be my guess, but you beat me to it Earnest!
Happy Thanksgiving everyone!
God Bless


Kevin Boddicker
TriQ 200 N7868B    539 hrs
Luana, IA.



> On Nov 25, 2020, at 7:19 AM, Earnest Martin via groups.io <MartinErni@...> wrote:
>
> QAC’s stated reason for putting the strainers inboard was, “ we can use a smaller strainer by putting it in the prop wash”.
>
> Earnest Martin
> 40 Glen Cove Drive
> Arden NC 28704-3219
> 828-230-5378
> martinerni@...
>
>
>> On Nov 24, 2020, at 9:58 PM, Jay Scheevel <jay@...> wrote:
>>
>> I agree with Bruce. For years I have tried to noodle out the reasoning that QAC recommended the inboard mounting of the sparrow strainers and it may have something to do with the stall of the canard beginning inboard so the incipient stall will partially washout on the sparrow strainer resulting in a sort of stall recovery effect by adding forward stick forces. This is just a guess on my part.
>>
>> Cheers,
>> Jay
>>
>> -----Original Message-----
>> From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Bruce Crain
>> Sent: Tuesday, November 24, 2020 7:14 PM
>> To: main@q-list.groups.io
>> Subject: Re: [Q-List] Sparrow strainers
>>
>> After my experience with putting the sparrow strainer mid span I would just go with the plans.  It is a given and midpoint is not.  I put 1 1/2 degree up incidence on the canard and .8 up on the main wing.  If you have a light and therefore fast Q the view over the nose will be good as the aft end flies higher the faster you fly.
>> Bruce
>>> On Nov 24, 2020, at 4:03 PM, Dorothea Keats <dkeats@...> wrote:
>>>
>>>  About to install the sparrow strainers on the Q200 elevator. I noticed on the video showing Bruces airplane , he had the strainers in the middle. Is there any concern installing them on the outboard side of the elevator as apposed to the inside?
>>>
>>> Should be finished most of the bodywork on the flying surfaces next week, so I will be able to install the canard and wing. Following some of the older threads, I think on the Q200 it is recommended by Sam and some others to add one more positive angle of attack on the canard. Did I get that right? The wing stays as is.
>>>
>>> Still picking micro from my nose, but the end is in sight.  Take care--------------  Chris
>>>
>>>
>>> --
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>> ____________________________________________________________
>> Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more
>>
>> Death Row Inmates Scam State Pandemic Benefits
>> http://thirdpartyoffers.juno.com/TGL3131/5fbdbe0011d1f3dff5949st03duc1
>> Pennsylvania, Nevada Certify Vote Results
>> http://thirdpartyoffers.juno.com/TGL3131/5fbdbe0030b7a3dff5949st03duc2
>> Flournoy May Not Be a Shoo-In for Defense After All
>> http://thirdpartyoffers.juno.com/TGL3131/5fbdbe004fa7f3dff5949st03duc3
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>







4861 - 4880 of 55667