Date   

GU canard for sale?

ryan goodman
 

Anyone or there have a decent GU canard sitting around for a Q2? Tossing around the idea of swapping my LS1 back to that. Not fully decided as of yet but if there's one laying around for the right price that would save me making a new one it might twist my arm. 
       Thanks, Ryan


Re: Motor mount backing plate

Bruce Crain
 

Another spot to use steel instead of aluminum is the main gear axles.  Thicker is better also.
Bruce Crain


On Apr 26, 2021, at 6:04 AM, Mike Steinsland <MIKESKUSTOMS@...> wrote:


Thanks Tim
I'm going to send for that info

Cheers

On Sun., Apr. 25, 2021, 6:21 p.m. Tim, <timmrlw@...> wrote:
Worked the other month, following a bit of manual attention from Jon it then sent out the links for the downloads.




Re: Motor mount backing plate

Mike Steinsland
 

Thanks Tim
I'm going to send for that info

Cheers

On Sun., Apr. 25, 2021, 6:21 p.m. Tim, <timmrlw@...> wrote:
Worked the other month, following a bit of manual attention from Jon it then sent out the links for the downloads.


Re: Looking For Q2 and 200 Projects, Midwest Prefered

jtdickman
 

I have a Q2 that has the Q200 updated but the rev master engine. It’s a project need work. It’s located in western Kansas. 

Regards;
Jeff Dickman

On Apr 26, 2021, at 1:26 AM, RK <rodneystewart42@...> wrote:



[Edited Message Follows]

I am in the far West and South of Kentucky on the Tennessee line.  My home airfield is Kyle-Oakley Field KCEY.  I have a fab shop here and I can't easily get away for a week or so at a time so I'm trying to stay to the Midwest if I can.  If that option is exhausted,  I'll be hitting you guys up that are out on the periphery.  

Nice Elliot quote btw


Re: Looking For Q2 and 200 Projects, Midwest Prefered

RK
 
Edited

I am in the far West and South of Kentucky on the Tennessee line.  My home airfield is Kyle-Oakley Field KCEY.  I have a fab shop here and I can't easily get away for a week or so at a time so I'm trying to stay to the Midwest if I can.  If that option is exhausted,  I'll be hitting you guys up that are out on the periphery.  

Nice Elliot quote btw


Re: Looking For Q2 and 200 Projects, Midwest Prefered

John Hoxie
 

Rodney,
I'm in New Mexico. Where are you?

 
John Hoxie
He is no fool, who gives up what he can not keep, to gain what he can not loose -- Jim Elliot


On Sunday, April 25, 2021, 12:04:23 PM MDT, RK <rodneystewart42@...> wrote:


Thanks, Sir.  That's a little bit farther than I was hoping to travel,  but keep me posted on what transpires with our Northern neighbor across the border.


Re: Motor mount backing plate

Jay Scheevel
 

I also used steel. Good substitution.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Sunday, April 25, 2021 2:56 PM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Motor mount backing plate

 

Thanks guys

 

head down....chuga chuga 

 

On Sun, Apr 25, 2021 at 4:52 PM Sam Hoskins <sam.hoskins@...> wrote:

The plans called for aluminum, but I found that when applying the proper torque, especially for the old 200, the plates deformed quite a bit. So I remade them in 1/8“ steel.

 

Sam

 

On Sun, Apr 25, 2021, 3:12 PM Tim <timmrlw@...> wrote:

Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.


Cheers, Tim


 

--

 

Mike Steinsland

 


Re: Motor mount backing plate

Tim
 

Worked the other month, following a bit of manual attention from Jon it then sent out the links for the downloads.


Re: My new baby

 

I will do my best 


On Apr 25, 2021, at 1:27 PM, Bruce Crain <jcrain2@...> wrote:

Drag Jim along with you to FOD!  Two really sexy Q’s!!
Bruce 


On Apr 25, 2021, at 12:48 PM, Mike via groups.io <n7000t@...> wrote:

Yep, Jim was my first point of contact and has been very helpful all the way through 
Mike 


On Apr 25, 2021, at 8:55 AM, Jay Scheevel <jay@...> wrote:



Very nice, Mike and welcome. Bob is a valuable member of this group and a skilled builder, so you have a great airplane. Sorry to see Bob give it up, but glad it has found a good home where it will continue to fly regularly and thanks to Jim P. for making it happen.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike via groups.io
Sent: Sunday, April 25, 2021 9:09 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] My new baby

 

Thanks guys!   Looking forward to “field of dreams “



On Apr 25, 2021, at 7:16 AM, Bruce Crain <jcrain2@...> wrote:

Nice!!  Another Quickie and pilot on-line!  And the great flying weather is here!

Bruce Crain



On Apr 25, 2021, at 6:10 AM, Jerry Marstall <jerrylm1986@...> wrote:



Welcome. You have a great plane there. Enjoy!

Jerry Marstall

 

On Sun, Apr 25, 2021, 2:26 AM Rodney Stewart <rodneystewart42@...> wrote:

Looks fantastic!

 




Re: Motor mount backing plate

Mike Steinsland
 

Can you still get stuff from quickheads?.... I thought it went the way of the dodo

On Sun, Apr 25, 2021 at 4:12 PM Tim <timmrlw@...> wrote:
Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.


Cheers, Tim



--
 
Mike Steinsland


Re: Motor mount backing plate

Mike Steinsland
 

Thanks guys

head down....chuga chuga 

On Sun, Apr 25, 2021 at 4:52 PM Sam Hoskins <sam.hoskins@...> wrote:
The plans called for aluminum, but I found that when applying the proper torque, especially for the old 200, the plates deformed quite a bit. So I remade them in 1/8“ steel.

Sam

On Sun, Apr 25, 2021, 3:12 PM Tim <timmrlw@...> wrote:
Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.


Cheers, Tim



--
 
Mike Steinsland


Re: Motor mount backing plate

Sam Hoskins
 

The plans called for aluminum, but I found that when applying the proper torque, especially for the old 200, the plates deformed quite a bit. So I remade them in 1/8“ steel.

Sam

On Sun, Apr 25, 2021, 3:12 PM Tim <timmrlw@...> wrote:
Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.


Cheers, Tim


Re: My new baby

Bruce Crain
 

Drag Jim along with you to FOD!  Two really sexy Q’s!!
Bruce 


On Apr 25, 2021, at 12:48 PM, Mike via groups.io <n7000t@...> wrote:

Yep, Jim was my first point of contact and has been very helpful all the way through 
Mike 


On Apr 25, 2021, at 8:55 AM, Jay Scheevel <jay@...> wrote:



Very nice, Mike and welcome. Bob is a valuable member of this group and a skilled builder, so you have a great airplane. Sorry to see Bob give it up, but glad it has found a good home where it will continue to fly regularly and thanks to Jim P. for making it happen.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike via groups.io
Sent: Sunday, April 25, 2021 9:09 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] My new baby

 

Thanks guys!   Looking forward to “field of dreams “



On Apr 25, 2021, at 7:16 AM, Bruce Crain <jcrain2@...> wrote:

Nice!!  Another Quickie and pilot on-line!  And the great flying weather is here!

Bruce Crain



On Apr 25, 2021, at 6:10 AM, Jerry Marstall <jerrylm1986@...> wrote:



Welcome. You have a great plane there. Enjoy!

Jerry Marstall

 

On Sun, Apr 25, 2021, 2:26 AM Rodney Stewart <rodneystewart42@...> wrote:

Looks fantastic!

 




Re: Motor mount backing plate

Tim
 

Hi Mike,

I needed similar info for other metal parts and ended up buying the appendix for the plans from quickheads.
It looks like EM2 is 0.125” in 2024T3, so you have the right spec.


Cheers, Tim


Re: Motor mount backing plate

Mike Steinsland
 

Its for the Revmaster motor


Motor mount backing plate

Mike Steinsland
 

Hi Guys,
Can anybody come to my rescue and tell me what the EM2 backup plate for the motor mounts is made from.
I have some .125 2024 but not sure if that will do the job.

While I'm at it is there a list anywhere with dimensions/ specs for parts like this or is it "fit on application". It would have been so simple to put those dimensions on the drawings.....don't know what they were thinking.

Thanks
Mike


Re: Looking For Q2 and 200 Projects, Midwest Prefered

Martin Skiby
 

Will do.  He is in the Eastern part of Canadian so a long long way

Martin

 


On Apr 25, 2021, at 11:04 AM, RK <rodneystewart42@...> wrote:

Thanks, Sir.  That's a little bit farther than I was hoping to travel,  but keep me posted on what transpires with our Northern neighbor across the border.


Re: My new baby

 

Yep, Jim was my first point of contact and has been very helpful all the way through 
Mike 


On Apr 25, 2021, at 8:55 AM, Jay Scheevel <jay@...> wrote:



Very nice, Mike and welcome. Bob is a valuable member of this group and a skilled builder, so you have a great airplane. Sorry to see Bob give it up, but glad it has found a good home where it will continue to fly regularly and thanks to Jim P. for making it happen.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike via groups.io
Sent: Sunday, April 25, 2021 9:09 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] My new baby

 

Thanks guys!   Looking forward to “field of dreams “



On Apr 25, 2021, at 7:16 AM, Bruce Crain <jcrain2@...> wrote:

Nice!!  Another Quickie and pilot on-line!  And the great flying weather is here!

Bruce Crain



On Apr 25, 2021, at 6:10 AM, Jerry Marstall <jerrylm1986@...> wrote:



Welcome. You have a great plane there. Enjoy!

Jerry Marstall

 

On Sun, Apr 25, 2021, 2:26 AM Rodney Stewart <rodneystewart42@...> wrote:

Looks fantastic!

 


Re: Looking For Q2 and 200 Projects, Midwest Prefered

RK
 

Thanks, Sir.  That's a little bit farther than I was hoping to travel,  but keep me posted on what transpires with our Northern neighbor across the border.


Re: My new baby

Jay Scheevel
 

Very nice, Mike and welcome. Bob is a valuable member of this group and a skilled builder, so you have a great airplane. Sorry to see Bob give it up, but glad it has found a good home where it will continue to fly regularly and thanks to Jim P. for making it happen.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike via groups.io
Sent: Sunday, April 25, 2021 9:09 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] My new baby

 

Thanks guys!   Looking forward to “field of dreams “



On Apr 25, 2021, at 7:16 AM, Bruce Crain <jcrain2@...> wrote:

Nice!!  Another Quickie and pilot on-line!  And the great flying weather is here!

Bruce Crain



On Apr 25, 2021, at 6:10 AM, Jerry Marstall <jerrylm1986@...> wrote:



Welcome. You have a great plane there. Enjoy!

Jerry Marstall

 

On Sun, Apr 25, 2021, 2:26 AM Rodney Stewart <rodneystewart42@...> wrote:

Looks fantastic!

 

1121 - 1140 of 53004