Date   

Re: Resin volume placed on foam

Eugen Pilarski
 

Thank you very much for your notes and information! That sounds good for me.

I will order one from EBay an Test it with a plug on fan from Pabst or anyone’s other.👍

Best regards

Eugen

Von meinem iPhone gesendet

Am 20.05.2021 um 08:36 schrieb Christoph Steiner via groups.io <csteiner=mac.com@groups.io>:

Here the 220V version of this Vacuum pump I use (Needs active cooling for our purpose):

https://www.gthebeefirm.com/index.php?main_page=product_info&products_id=200872

Attached a pdf describing the LoVa technique.

Christoph Steiner



Am 19.05.2021 um 19:33 schrieb Eugen Pilarski <interbus@web.de>:

Did any know which kind of vacuum pump they use? What is that for a brand? Never see that before!?! Any source available and in best vase with a link? Is that from a refrigator? What is the best level they move down the pressure?

Eugen

Von meinem iPhone gesendet

Am 27.03.2021 um 15:18 schrieb Stuart Grant <smgrant@bellsouth.net>:
Here is a link to a YouTube video where Cozy Girrl Randi explains about how Cozy Girrls make composite parts, including mixing epoxy, mixing micro, using gloves, low pressure vacuum bagging, peel ply, sanding etc. The video was recorded at Sun-N-Fun 2019 and the beginning has a lot of noise from the air show but Randi has great tips. https://youtu.be/fmuDOWTr_3c





<LoVac....pdf>


Re: Spring Fling

allen relseg
 

no talk about spring fling  ????
is it still on this weekend ??



On Monday, March 1, 2021, 11:31:55 PM EST, Terry Crouch via groups.io <q1terrymdt@...> wrote:


Hi Kevin,

 I haven't been to Decorah yet this year. Sounds like a great reason to go. See you in May.

Terry Crouch
Quickie N14TC


-----Original Message-----
From: Kevin Boddicker <trumanst@...>
To: Q List <Q-List@groups.io>
Sent: Sun, Feb 28, 2021 3:05 pm
Subject: [Q-List] Spring Fling

Listers,

Bruce has been promoting the Spring Fling for quite a while now.
He called me yesterday, and needed information.
I decided on May 21,22,23, 2021. Good Lord willin.
Hope everyone can participate on those dates.
Last year we rescheduled for mid July, due to the virus. No-one got sick by the way.
Personally, I will have received both vaccines by then, so no worries. Right?
Mark your calendars. Make room arrangements. Lots of rooms in DEH. That’s Decorah IA.
It’s laid back, lots of fun, great FBO on the field that goes out of his way to accommodate .

If you know you are going to attend raise your hand.

All the best,




Kevin Boddicker
TriQ 200 N7868B  542 hrs
Luana, IA.










Re: Resin volume placed on foam

Christoph Steiner
 

Here the 220V version of this Vacuum pump I use (Needs active cooling for our purpose):

https://www.gthebeefirm.com/index.php?main_page=product_info&products_id=200872

Attached a pdf describing the LoVa technique.

Christoph Steiner

Am 19.05.2021 um 19:33 schrieb Eugen Pilarski <interbus@web.de>:

Did any know which kind of vacuum pump they use? What is that for a brand? Never see that before!?! Any source available and in best vase with a link? Is that from a refrigator? What is the best level they move down the pressure?

Eugen

Von meinem iPhone gesendet

Am 27.03.2021 um 15:18 schrieb Stuart Grant <smgrant@bellsouth.net>:

Here is a link to a YouTube video where Cozy Girrl Randi explains about how Cozy Girrls make composite parts, including mixing epoxy, mixing micro, using gloves, low pressure vacuum bagging, peel ply, sanding etc. The video was recorded at Sun-N-Fun 2019 and the beginning has a lot of noise from the air show but Randi has great tips. https://youtu.be/fmuDOWTr_3c


Re: Resin volume placed on foam

Brian Larick
 

Gene she is using a positive flow pump hooked to the draw side.  I have pictures of Randi’s pump if you want that one.  I researched and found basically the same pump made for vacuum from the same company.

Here’s a pic of the one I bought.


Brian

On May 19, 2021, at 13:33, Eugen Pilarski <interbus@...> wrote:

 Did any know which kind of vacuum pump they use? What is that for a brand? Never see that before!?! Any source available and in best vase with a link? Is that from a refrigator? What is the best level they move down the pressure? 

Eugen 

Von meinem iPhone gesendet

Am 27.03.2021 um 15:18 schrieb Stuart Grant <smgrant@...>:

Here is a link to a YouTube video where Cozy Girrl Randi explains about how Cozy Girrls make composite parts, including mixing epoxy, mixing micro, using gloves, low pressure vacuum bagging, peel ply, sanding etc. The video was recorded at Sun-N-Fun 2019 and the beginning has a lot of noise from the air show but Randi has great tips. https://youtu.be/fmuDOWTr_3c
If the link doesn't work search YouTube for
Cozy Girrrl's LoVac Composite Tools & Tricks


Re: Resin volume placed on foam

Eugen Pilarski
 

Did any know which kind of vacuum pump they use? What is that for a brand? Never see that before!?! Any source available and in best vase with a link? Is that from a refrigator? What is the best level they move down the pressure? 

Eugen 

Von meinem iPhone gesendet

Am 27.03.2021 um 15:18 schrieb Stuart Grant <smgrant@...>:

Here is a link to a YouTube video where Cozy Girrl Randi explains about how Cozy Girrls make composite parts, including mixing epoxy, mixing micro, using gloves, low pressure vacuum bagging, peel ply, sanding etc. The video was recorded at Sun-N-Fun 2019 and the beginning has a lot of noise from the air show but Randi has great tips. https://youtu.be/fmuDOWTr_3c
If the link doesn't work search YouTube for
Cozy Girrrl's LoVac Composite Tools & Tricks


Re: Nathan Peck's Quickie Q-Tour is uploaded to YouTube

smeshno1@...
 

 That would work too, Bob.  Contact! Magazine (Pat Panzera, editor) had a feature on Pegasus DP-1 who have been developing a 1/2 Continental O-200 to a two cylinder specifically for LSA use. It has been running but the developer whom I have chatted with was also doing his best to avoid using a forged crankshaft. I think he finally tossed in the towel and went with the machine forged steel. I also informed that Nitriding and keeping the throw and mains radii larger than .100" are both required for aircraft use. The fact is that either powerplant would indeed make an excellent Q1 FWF package. Rocket indeed! Wow.. hotrod for one. 

*Not affiliated with Teledyne Continental Motors WELCOME TO THE OFFICIAL SITE OF THE DP-1 LIGHT SPORT AIRCRAFT ENGINE. The DP-1 is an exciting new development for aircraft and vehicles which need LIGHT WEIGHT AND RELIABLE POWER at an AFFORDABLE PRICE. This kit provides all the necessary SPECIAL components to make a 100 cubic inch displacement engine that is a horizontally opposed, two-cylinder ...
flypegasuspower.com



From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Robert Cringely <bob@...>
Sent: Monday, May 17, 2021 9:28 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] Nathan Peck's Quickie Q-Tour is uploaded to YouTube
 
If you mean a Franklin O-110, I have one! It came in 50 and 60 hp versions rated at 3300 rpm. 

Bob

On Mon, May 10, 2021 at 7:46 AM Bruce Crain <jcrain2@...> wrote:
Great to see you and your Q2 again Nathan!!  Say, I looked at a Continental 0200 1/2 a while back.  I suppose it would weigh around 120 lbs and crank out 50 hp.  Might make that Q2 a rocket!  3 gals/hr!  Just a thought.
Bruce

On May 9, 2021, at 11:43 PM, Jim Patillo <logistics_engineering@...> wrote:



Nathan, thank you for the zoom meeting you did. Informative and like Sam said “what a history”. Sorry to hear you’ve had so many problems with the Rotax and Warp Drive. 


Regards,
Jim
N46JP Q200




Re: Nathan Peck's Quickie Q-Tour is uploaded to YouTube

Jerry Marstall
 

That  is really cool!  Jerry


On Mon, May 17, 2021, 4:02 PM Nathan Peck <nathanpeck@...> wrote:
If anyone is interested, I posted a video of a Quickie take off and lap around the runway.  You can clearly hear the Rotax wind-up as speed builds, especially off the runway in ground effect.

On Sun, May 9, 2021 at 7:56 PM Sam Hoskins <sam.hoskins@...> wrote:
Thanks Nathan.  What a history!

https://youtu.be/rdNRasb3Nz8

The rest of the Q-Tours are here: https://www.youtube.com/channel/UCvpREq5dz5VjgcUFVNcoEhQ

We're getting quite a collection.  Who's ready to go next?

Sam


Re: Nathan Peck's Quickie Q-Tour is uploaded to YouTube

Robert Cringely
 

If you mean a Franklin O-110, I have one! It came in 50 and 60 hp versions rated at 3300 rpm. 

Bob

On Mon, May 10, 2021 at 7:46 AM Bruce Crain <jcrain2@...> wrote:
Great to see you and your Q2 again Nathan!!  Say, I looked at a Continental 0200 1/2 a while back.  I suppose it would weigh around 120 lbs and crank out 50 hp.  Might make that Q2 a rocket!  3 gals/hr!  Just a thought.
Bruce

On May 9, 2021, at 11:43 PM, Jim Patillo <logistics_engineering@...> wrote:



Nathan, thank you for the zoom meeting you did. Informative and like Sam said “what a history”. Sorry to hear you’ve had so many problems with the Rotax and Warp Drive. 


Regards,
Jim
N46JP Q200




Re: Nathan Peck's Quickie Q-Tour is uploaded to YouTube

Jay Scheevel
 

Very cool Nathan. I am stealing your idea for backward looking camera mounting on the cowl!

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Nathan Peck
Sent: Monday, May 17, 2021 2:02 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Nathan Peck's Quickie Q-Tour is uploaded to YouTube

 

If anyone is interested, I posted a video of a Quickie take off and lap around the runway.  You can clearly hear the Rotax wind-up as speed builds, especially off the runway in ground effect.

 

On Sun, May 9, 2021 at 7:56 PM Sam Hoskins <sam.hoskins@...> wrote:

Thanks Nathan.  What a history!

https://youtu.be/rdNRasb3Nz8

The rest of the Q-Tours are here: https://www.youtube.com/channel/UCvpREq5dz5VjgcUFVNcoEhQ

We're getting quite a collection.  Who's ready to go next?

Sam


Re: Nathan Peck's Quickie Q-Tour is uploaded to YouTube

Nathan Peck
 

If anyone is interested, I posted a video of a Quickie take off and lap around the runway.  You can clearly hear the Rotax wind-up as speed builds, especially off the runway in ground effect.

On Sun, May 9, 2021 at 7:56 PM Sam Hoskins <sam.hoskins@...> wrote:
Thanks Nathan.  What a history!

https://youtu.be/rdNRasb3Nz8

The rest of the Q-Tours are here: https://www.youtube.com/channel/UCvpREq5dz5VjgcUFVNcoEhQ

We're getting quite a collection.  Who's ready to go next?

Sam


FS: Bob Archer Antennas - COM & VOR

Steve Rothert
 

I've got two Bob Archer antennas for sale.  $80 each plus shipping.  Contact me at swrothert@...


Re: I published a new video about building the Q200

Bruce Crain
 

Nice!  Luv’dit!  
Bruce


On May 16, 2021, at 6:25 PM, Jerry Marstall <jerrylm1986@...> wrote:


Awesome!  Great story told in a great manner. Thanks for sharing, Mike.
Jerry M

On Sun, May 16, 2021, 5:23 PM Mike Dwyer <q200pilot@...> wrote:




Re: I published a new video about building the Q200

Jerry Marstall
 

Awesome!  Great story told in a great manner. Thanks for sharing, Mike.
Jerry M

On Sun, May 16, 2021, 5:23 PM Mike Dwyer <q200pilot@...> wrote:


I published a new video about building the Q200

Mike Dwyer
 


Re: Q2 Instruction

Pat Weaver
 

Thanks for the information! That's a little sooner than expected but I may be able to make that work! 


On Sun, May 16, 2021, 3:32 PM Bruce Crain <jcrain2@...> wrote:
If the weather is good maybe you could drop into Spring Fling at Decorah, IA next Friday Saturday and Sunday!  Could be lots if info and maybe a ride or two!
Bruce Crain 


On May 16, 2021, at 11:27 AM, Pat Weaver <pweaver311@...> wrote:


I am trying to find someone in the Q2 community willing to take me up in their Q2 and provide some instruction/tips before soloing my Q2. I am happy to travel almost any distance and happy to donate money to their aviation fund. If anyone is able or willing to help, please let me know. Thank you in advance!

-Patrick W.



Re: Q2 Instruction

Bruce Crain
 

If the weather is good maybe you could drop into Spring Fling at Decorah, IA next Friday Saturday and Sunday!  Could be lots if info and maybe a ride or two!
Bruce Crain 


On May 16, 2021, at 11:27 AM, Pat Weaver <pweaver311@...> wrote:


I am trying to find someone in the Q2 community willing to take me up in their Q2 and provide some instruction/tips before soloing my Q2. I am happy to travel almost any distance and happy to donate money to their aviation fund. If anyone is able or willing to help, please let me know. Thank you in advance!

-Patrick W.



Q2 Instruction

Pat Weaver
 

I am trying to find someone in the Q2 community willing to take me up in their Q2 and provide some instruction/tips before soloing my Q2. I am happy to travel almost any distance and happy to donate money to their aviation fund. If anyone is able or willing to help, please let me know. Thank you in advance!

-Patrick W.


Re: Q1 Fuselage comes up

Robert Cringely
 

Puts my Quickie to shame...


On Sat, May 15, 2021 at 5:37 AM Eugen Pilarski <interbus@...> wrote:
So far the bottom is in the bag for the next 24h!

 



Best regards Eugen 




Von meinem iPhone gesendet

Am 24.04.2021 um 16:18 schrieb Eugen Pilarski <interbus@...>:

Hello Q-Community,

so far the second fuselage side is in the bag.
😀

Please find below the picture.

Best regards 

Eugen 
<image0.jpeg>




From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Eugen Pilarski <interbus@...>
Sent: Wednesday, April 7, 2021 11:58:41 AM
To: main@q-list.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Q1 Fuselage comes up
 
Dear Q-Community,

thanks for your hints and comments. Again, great to get that feedback from you guys! 

To post cure the Resin that I use for the Q1 Project (MGS LR385/LH386) it’s already a oven available that is used for the ASSO X-RAY Project (MGS LR285/LH285), please find below some Picture. It´s a full control heating process with some thermocouples and a customizing software solution (DIY).

It’s a easy construction of XPS elements, some cheap fans (Ebay 8$), two control cabinet heater from EBM Pabst (Ebay 20$), some bulbs (5 * 200W) and in the end a customizing fermentation controller (BrewiPI), please find below the link. https://www.brewpiremix.com   After all my aircrafts are in the air, maybe I will start to made my own beer :-)

To fit all parts of the Q1 in that oven it will be needed an extended version, if my buddy isn’t ready to go with his paint booth. So we will see……

The temperature will not rise more than 65°C, based on the Foam used in wing and canard area, for min. 15h but heat up 10°C/h (5h) and cool down with 10°C/h (5h).

So far all bulkheads are ready to go, just the seat bulkhead need to heat up (bending area) and fixed with resin/glass combo. The next step will be to contouring/cut out the bottom


Re: Q1 Fuselage comes up

Bruce Crain
 

Nice Eugen!!  Can’t wait to see the finished product and hear your percent weight loss at empty weight!!
Bruce


On May 15, 2021, at 5:37 AM, Eugen Pilarski <interbus@...> wrote:

So far the bottom is in the bag for the next 24h!

<image1.jpeg>
<image2.jpeg>
 



Best regards Eugen 




Von meinem iPhone gesendet

Am 24.04.2021 um 16:18 schrieb Eugen Pilarski <interbus@...>:

Hello Q-Community,

so far the second fuselage side is in the bag.
😀

Please find below the picture.

Best regards 

Eugen 
<image0.jpeg>




From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Eugen Pilarski <interbus@...>
Sent: Wednesday, April 7, 2021 11:58:41 AM
To: main@q-list.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Q1 Fuselage comes up
 
Dear Q-Community,

thanks for your hints and comments. Again, great to get that feedback from you guys! 

To post cure the Resin that I use for the Q1 Project (MGS LR385/LH386) it’s already a oven available that is used for the ASSO X-RAY Project (MGS LR285/LH285), please find below some Picture. It´s a full control heating process with some thermocouples and a customizing software solution (DIY).

It’s a easy construction of XPS elements, some cheap fans (Ebay 8$), two control cabinet heater from EBM Pabst (Ebay 20$), some bulbs (5 * 200W) and in the end a customizing fermentation controller (BrewiPI), please find below the link. https://www.brewpiremix.com   After all my aircrafts are in the air, maybe I will start to made my own beer :-)

To fit all parts of the Q1 in that oven it will be needed an extended version, if my buddy isn’t ready to go with his paint booth. So we will see……

The temperature will not rise more than 65°C, based on the Foam used in wing and canard area, for min. 15h but heat up 10°C/h (5h) and cool down with 10°C/h (5h).

So far all bulkheads are ready to go, just the seat bulkhead need to heat up (bending area) and fixed with resin/glass combo. The next step will be to contouring/cut out the bottom



Re: Q1 Fuselage comes up

Eugen Pilarski
 

So far the bottom is in the bag for the next 24h!

 



Best regards Eugen 




Von meinem iPhone gesendet

Am 24.04.2021 um 16:18 schrieb Eugen Pilarski <interbus@...>:

Hello Q-Community,

so far the second fuselage side is in the bag.
😀

Please find below the picture.

Best regards 

Eugen 
<image0.jpeg>




From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Eugen Pilarski <interbus@...>
Sent: Wednesday, April 7, 2021 11:58:41 AM
To: main@q-list.groups.io <main@Q-List.groups.io>
Subject: Re: [Q-List] Q1 Fuselage comes up
 
Dear Q-Community,

thanks for your hints and comments. Again, great to get that feedback from you guys! 

To post cure the Resin that I use for the Q1 Project (MGS LR385/LH386) it’s already a oven available that is used for the ASSO X-RAY Project (MGS LR285/LH285), please find below some Picture. It´s a full control heating process with some thermocouples and a customizing software solution (DIY).

It’s a easy construction of XPS elements, some cheap fans (Ebay 8$), two control cabinet heater from EBM Pabst (Ebay 20$), some bulbs (5 * 200W) and in the end a customizing fermentation controller (BrewiPI), please find below the link. https://www.brewpiremix.com   After all my aircrafts are in the air, maybe I will start to made my own beer :-)

To fit all parts of the Q1 in that oven it will be needed an extended version, if my buddy isn’t ready to go with his paint booth. So we will see……

The temperature will not rise more than 65°C, based on the Foam used in wing and canard area, for min. 15h but heat up 10°C/h (5h) and cool down with 10°C/h (5h).

So far all bulkheads are ready to go, just the seat bulkhead need to heat up (bending area) and fixed with resin/glass combo. The next step will be to contouring/cut out the bottom

961 - 980 of 53004