1. main@Q-List.groups.io
  2. Messages
   Date   
Re: "Field Of Dreams" 2021 Pilot and Camping information.

Kevin Boddicker
 

Are you going to bring the Rocky Mountain high with you too?


On Sep 7, 2021, at 4:40 PM, Jon Finley <jd@...> wrote:

My bags are packed, I'm ready to go.
I'm standin' here outside your door...

Oh... wait... no I'm not, yet!  Soon though!  Can't wait to see everyone!

<GS010113.jpg>


Jon Finley
Somewhere in the Southwest flying an RV-4

Re: A look back at N1711Q

Rick Hole
 

Velocity, I believe, has not made any fiberglass parts for them nor has the tooling to do so.
Apart from Velocity I built two canard with carbon fiber tube spars and two sets of main wings.

Sonia (1953-2020) & Rick


On Sat, Sep 11, 2021, 8:41 PM <smeshno1@...> wrote:
By any chance did they ever build any Dragonfly wing or canard?
From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Friday, September 10, 2021 9:52 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] A look back at N1711Q
 
Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole=ieee.org@groups.io> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 
Re: A look back at N1711Q

Frankenbird Vern
 

By any chance did they ever build any Dragonfly wing or canard?

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Friday, September 10, 2021 9:52 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] A look back at N1711Q
 
Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole@...> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 
Re: A look back at N1711Q

Jay Scheevel
 

Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole@...> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 
Re: A look back at N1711Q

Rick Hole
 

I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 
Re: A look back at N1711Q

Bruce Crain
 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?
Bruce


---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 
A look back at N1711Q

Rick Hole
 

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 
Re: Technical content for FOD?

Mike Steinsland
 

Probably have to mooove some airplanes to fit it in the hanger


On Fri., Sep. 10, 2021, 1:55 p.m. Kidd, Robert L [US] (IS), <robert.kidd@...> wrote:

Starting to sound like a lot of bulls**t to me…

 
Re: Technical content for FOD?

Kidd, Robert L [US] (IS)
 

Starting to sound like a lot of bulls**t to me…

 

_._,_._,_
Re: Technical content for FOD?

Mike Steinsland
 

I think we should milk these puns for all they're worth


On Fri., Sep. 10, 2021, 11:07 a.m. Jay Scheevel, <jay@...> wrote:

Your guess is “udder-ly” incorrect 😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Friday, September 10, 2021 8:36 AM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Technical content for FOD?

 

Is that  Steerman?

 

On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  

Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000

 
Re: Technical content for FOD?

Rick Hole
 

I have thought that if cows could fly they would fly like a Steerman

Rick Hole


On Fri, Sep 10, 2021, 9:07 AM Jay Scheevel <jay@...> wrote:

Your guess is “udder-ly” incorrect 😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Friday, September 10, 2021 8:36 AM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Technical content for FOD?

 

Is that  Steerman?

 

On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  

Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000

 
Re: Technical content for FOD?

Jay Scheevel
 

Your guess is “udder-ly” incorrect 😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Friday, September 10, 2021 8:36 AM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Technical content for FOD?

 

Is that  Steerman?

 

On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  

Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000

 
Re: Technical content for FOD?

Mike Steinsland
 

Is that  Steerman?


On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:
So it is true!  "Even a rock will fly if you make it go fast enough!  
Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000
Re: Technical content for FOD?

One Sky Dog
 

Bruce,

Rocks do not fly! They follow ballistic trajectories, given enough power you get a Tesla in space but not flying.

Charlie



On Friday, September 10, 2021, 4:38 AM, Bruce Crain <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  
Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000
Re: Technical content for FOD?

Bruce Crain
 

So it is true!  "Even a rock will fly if you make it go fast enough!  
Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000



?
message/rfc822

Re: Technical content for FOD?

Frankenbird Vern
 

Mmmm.. that would be Dead Cow International in my home city of Wichita.  True story too.

Vern

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Thursday, September 9, 2021 6:00 PM
To: main@Q-List.groups.io <main@Q-List.groups.io>
Subject: [Q-List] Technical content for FOD?
 

Hi Bruce,

 

Wondering if there will be a technical program at FOD?. If so, perhaps we could ask Imraan to discuss this aerodynamic model which seems appropriate for central Oklahoma (and other locales in the midwest).

 

 

Cheers,

Jay
Re: Technical content for FOD?

Bruce Crain
 

He might!  He's pretty busy trying to make Tenure though so there's that!  I should have put you in charge of Technical Content as that is right  up your alley!
I do like cowls off with discussion answers and questions.  You can learn a lot from some of us "Old Builder/Flyers of which you are one Jay.  I always enjoy hearing you discuss your TriQ 200+.  I can't always keep up but at least I rubbed shoulder with you!  Whoop whoop!
The weather is looking great albeit a bit warm during the day so wear layers and come looking for a great time!
Bruce  

Please note: message attached

From: "Jay Scheevel" <jay@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] Technical content for FOD?
Date: Thu, 9 Sep 2021 17:00:44 -0600



?
message/rfc822

Reminder: Saturday's Q-Tour featuring Terry Crouch September 11. 0900

Sam Hoskins
 

Terry shows us his more than beautiful single place Quickie. Did you know that Terry won the EAA's Grand Reserve Champion in 1995? Tune in and see how he did it!

Saturday, September 11, 0900 Central Time USA

To join the Q-tour, click on the link below. You will not be admitted until 09:00, September 11.

https://us04web.zoom.us/j/79857260872?pwd=cGYrQlhYRDVjenVMdlN3YXRQaWJ0Zz09
Technical content for FOD?

Jay Scheevel
 

Hi Bruce,

 

Wondering if there will be a technical program at FOD?. If so, perhaps we could ask Imraan to discuss this aerodynamic model which seems appropriate for central Oklahoma (and other locales in the midwest).

 

 

Cheers,

Jay
Re: Saturday's Q-Tour featuring Terry Crouch September 11. 0900

gbrighton@...
 

Chris .. Good Luck .. sure u wont need it .. would be interested in how ur SDS Tuning looks .. maybe not the rite list !? .. Cheers .. Graham .

--------------------------------------------------
From: "Chris Walterson" <dkeats@...>
Sent: Friday, September 10, 2021 7:31 AM
To: <main@Q-List.groups.io>
Subject: Re: [Q-List] Saturday's Q-Tour featuring Terry Crouch September 11. 0900

Can't make the Zoom meeting. Getting my final done Saturday.------------- Chris


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus






--
This email has been checked for viruses by AVG.
https://www.avg.com
2421 - 2440 of 55033