Date   

Re: Terry Crouch's Quickie video is uploaded to You Tube!

Jay Scheevel
 

Great intro to your beautiful, still new looking, Q, Terry!  Thanks for relenting to Sam’s pressure to do this. I may have an alternative engine option for you, and no, no one has heard of this one or mentioned it to you, guaranteed. Contact me offline and I will bring you up to speed. (no pun intended). Hope to see you in Enid.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sam Hoskins
Sent: Monday, September 13, 2021 6:00 AM
To: main@Q-List.groups.io
Subject: [Q-List] Terry Crouch's Quickie video is uploaded to You Tube!

 

Thanks Terry.  And thanks for the surprise footage.

https://youtu.be/Mb7zIJCaBJs


Re: Terry Crouch's Quickie video is uploaded to You Tube!

 

Great presentation Terry,
Sorry I was unable to watch the show.  I was on an unexpected flight to Philly at the time to ferry a semi home.
And Thanks for showing the Lindy, in case anyone is interested it DID take alot of arm twisting...I think about 10 minutes worth. 
Terry's a pretty humble guy when it comes to things like that.
 
It's kind of interesting to note that when Terry flew my Quickie it was at a flyin we had at Mattoon, IL
He left the area!  So much so that the engine could no longer be heard.  After a while we began to worry...especially me...that something had happened.
All I could think about was, surely he didn't tear up my airplane?  But low and behold we began to hear that familiar pop pop in the distance.
 
I found it interesting his commentary about the differences in the two canards.  He may be the only Q1 builder who has actually flown both.
And yes to anyone who has not seen his airplane....you are in for a treat.  His is a very innovative Quickie.
 
Lookin forward to seeing the Cozy.


---------- Original Message ----------
From: "Sam Hoskins" <sam.hoskins@...>
To: main@Q-List.groups.io
Subject: [Q-List] Terry Crouch's Quickie video is uploaded to You Tube!
Date: Mon, 13 Sep 2021 04:59:43 -0700

Thanks Terry.  And thanks for the surprise footage.

https://youtu.be/Mb7zIJCaBJs




Re: Terry Crouch's Quickie video is uploaded to You Tube!

Jerry Marstall
 

Thanks Terry,

Really enjoyed your presentation.

Could you get a little better-looking camera person next time?

Jerry

 

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Sam Hoskins
Sent: Monday, September 13, 2021 8:00 AM
To: main@Q-List.groups.io
Subject: [Q-List] Terry Crouch's Quickie video is uploaded to You Tube!

 

Thanks Terry.  And thanks for the surprise footage.

https://youtu.be/Mb7zIJCaBJs


Terry Crouch's Quickie video is uploaded to You Tube!

Sam Hoskins
 

Thanks Terry.  And thanks for the surprise footage.

https://youtu.be/Mb7zIJCaBJs


Field Of Dreams

Bruce Crain
 

Say folks could you text me your arrival time here in Enid FOD?
My cell phone is +15804783670
Thank you!
Bruce Crain
____________________________________________________________
Choose to be safer online.
Opt-in to Cyber Safety with NortonLifeLock.
Plans starting as low as $6.95 per month.*
https://store.netzero.net/account/showService.do?serviceId=nz-nLifeLock&utm_source=mktg&utm_medium=taglines&utm_campaign=nzlifelk_launch&utm_content=tag695&promoCode=A34454


Re: A look back at N1711Q

smeshno1@...
 

 Rick..the tube spars then would be for a Q2 since Dragonfly design incorporates a "C" profile spar..

 I ask because of the location of my surfaces which I can see some evidence of highly experienced 
workmanship in construction.
  I purchased both the wing and canard of my project mostly in part because quite a few parts were already missing from the Q2 kit I purchased for less than 1K. The good part is all of the paperwork is intact and the shells themselves are in good condition.   

 As for my background.. I began my composites experience back in 1979 at Falcon Jet. The (at the time) new Falcon 50 has carbon fiber control surfaces, and the factory being an MRO so all of us with A&P or IA certificates had to be trained in field repair of this structure. Some of us made the trip to France and carried back the training. I was one of the Lead Mechanics on the line at the time..mostly Falcon 20 and Falcon 50.  

 After Falcon I accepted a stint at Beech back in my birth city of Wichita in 1982 on Starship1 in R&D.  
Quite a challenge that was but the aircraft eventually did begin production. After that I was at Boeing, then back to Beech (as Contractor), Triumph, Nordam, Israel Aerospace (in Israel).. all beginning at Lear working in upholstery and installing interiors. 

 I was Contactor more than half the time in my history. Ended up and I guess still am Manufacturing Engineering.   That was my last job anyway prior to Covid taking out the aircraft industry. 

 I had all the info package for Velocity and owned plans set #34 Cozy.  Just the same, the Tandem Wing has quite a few advantages for experienced pilots. Ramp appeal being one of them!  Looking forward to chatting with fellow owners this weekend in Enid..looks like we're going to have a few rain showers tomorrow and then will be clear and light winds.  Bruce did well with the storm gods being quiet this year.

Vern 

    


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Rick Hole via groups.io <r.hole@...>
Sent: Saturday, September 11, 2021 10:21 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] A look back at N1711Q
 
Velocity, I believe, has not made any fiberglass parts for them nor has the tooling to do so.
Apart from Velocity I built two canard with carbon fiber tube spars and two sets of main wings.

Sonia (1953-2020) & Rick

On Sat, Sep 11, 2021, 8:41 PM <smeshno1@...> wrote:
By any chance did they ever build any Dragonfly wing or canard?

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Friday, September 10, 2021 9:52 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] A look back at N1711Q
 
Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole=ieee.org@groups.io> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 


Re: "Field Of Dreams" 2021 Pilot and Camping information.

Kevin Boddicker
 

Are you going to bring the Rocky Mountain high with you too?


On Sep 7, 2021, at 4:40 PM, Jon Finley <jd@...> wrote:

My bags are packed, I'm ready to go.
I'm standin' here outside your door...

Oh... wait... no I'm not, yet!  Soon though!  Can't wait to see everyone!

<GS010113.jpg>


Jon Finley
Somewhere in the Southwest flying an RV-4


Re: A look back at N1711Q

Rick Hole
 

Velocity, I believe, has not made any fiberglass parts for them nor has the tooling to do so.
Apart from Velocity I built two canard with carbon fiber tube spars and two sets of main wings.

Sonia (1953-2020) & Rick


On Sat, Sep 11, 2021, 8:41 PM <smeshno1@...> wrote:
By any chance did they ever build any Dragonfly wing or canard?

From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Friday, September 10, 2021 9:52 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] A look back at N1711Q
 
Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole=ieee.org@groups.io> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 


Re: A look back at N1711Q

smeshno1@...
 

By any chance did they ever build any Dragonfly wing or canard?


From: main@Q-List.groups.io <main@Q-List.groups.io> on behalf of Jay Scheevel <jay@...>
Sent: Friday, September 10, 2021 9:52 PM
To: main@q-list.groups.io <main@q-list.groups.io>
Subject: Re: [Q-List] A look back at N1711Q
 
Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole@...> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 


Re: A look back at N1711Q

Jay Scheevel
 

Scott was at Oshkosh this year with his dad and the velocity crew. I stopped by to tell him I finally finished my tri-q. I think I received one of the first two or three tri-q gear kits that he made while at QAC. I also have one of the early “beefy” nose gears he made using  the velocity tooling.

Cheers,
Jay


On Sep 10, 2021, at 7:39 PM, Rick Hole via groups.io <r.hole@...> wrote:



I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 


Re: A look back at N1711Q

Rick Hole
 

I retired in October 2016 but each time I am in Sebastian FL I stop by to see the Swings at Velocity.  Scott doesn’t fly the Q200 much.  His son Riley enjoys flying it.

I remember you from that visit.  We had it in a T-hangar.  I saw N1711Q last December all shiny polished in the big hangar on the east side of the airport.

I wouldn’t want to go back to work, but if I were, I’d go back to Velocity and the Swing family.

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Bruce Crain
Sent: Friday, September 10, 2021 7:01 PM
To: main@Q-List.groups.io
Subject: Re: [Q-List] A look back at N1711Q

 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?

Bruce

---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 

 


Re: A look back at N1711Q

Bruce Crain
 

I think you took me down to the hanger to see it when you were wiring it.  Is anybody still flying Scott's Q200?
Bruce


---------- Original Message ----------
From: "Rick Hole via groups.io" <r.hole@...>
To: <main@Q-List.groups.io>
Subject: [Q-List] A look back at N1711Q
Date: Fri, 10 Sep 2021 17:18:57 -0600

<![if mso 9]><![endif]>

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 




A look back at N1711Q

Rick Hole
 

This video was taken 10 years ago.  Scott Swing years earlier had sold his Q200 to invest in Velocity.  The second owner had a mishap and decided not to repair.  N1711Q came back to Scott who did the fiberglass repairs.  I did the wiring and built the instrument panel.  The video show the first start after repairs were made.

 

The video is available for your viewing pleasure at https://vimeo.com/26038774

 

I just rediscovered this video.  I had forgotten it entirely.

 

Rick Hole

 


Re: Technical content for FOD?

Mike Steinsland
 

Probably have to mooove some airplanes to fit it in the hanger


On Fri., Sep. 10, 2021, 1:55 p.m. Kidd, Robert L [US] (IS), <robert.kidd@...> wrote:

Starting to sound like a lot of bulls**t to me…

 


Re: Technical content for FOD?

Kidd, Robert L [US] (IS)
 

Starting to sound like a lot of bulls**t to me…

 

_._,_._,_


Re: Technical content for FOD?

Mike Steinsland
 

I think we should milk these puns for all they're worth


On Fri., Sep. 10, 2021, 11:07 a.m. Jay Scheevel, <jay@...> wrote:

Your guess is “udder-ly” incorrect 😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Friday, September 10, 2021 8:36 AM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Technical content for FOD?

 

Is that  Steerman?

 

On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  

Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000

 


Re: Technical content for FOD?

Rick Hole
 

I have thought that if cows could fly they would fly like a Steerman

Rick Hole


On Fri, Sep 10, 2021, 9:07 AM Jay Scheevel <jay@...> wrote:

Your guess is “udder-ly” incorrect 😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Friday, September 10, 2021 8:36 AM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Technical content for FOD?

 

Is that  Steerman?

 

On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  

Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000

 


Re: Technical content for FOD?

Jay Scheevel
 

Your guess is “udder-ly” incorrect 😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike Steinsland
Sent: Friday, September 10, 2021 8:36 AM
To: main@Q-List.groups.io Group Moderators <main@q-list.groups.io>
Subject: Re: [Q-List] Technical content for FOD?

 

Is that  Steerman?

 

On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  

Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000

 


Re: Technical content for FOD?

Mike Steinsland
 

Is that  Steerman?


On Fri., Sep. 10, 2021, 7:38 a.m. Bruce Crain, <jcrain2@...> wrote:
So it is true!  "Even a rock will fly if you make it go fast enough!  
Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000




Re: Technical content for FOD?

One Sky Dog
 

Bruce,

Rocks do not fly! They follow ballistic trajectories, given enough power you get a Tesla in space but not flying.

Charlie



On Friday, September 10, 2021, 4:38 AM, Bruce Crain <jcrain2@...> wrote:

So it is true!  "Even a rock will fly if you make it go fast enough!  
Bruce

Please note: message attached

From: smeshno1@...
To: "main@Q-List.groups.io" <main@Q-List.groups.io>
Subject: Re: [Q-List] Technical content for FOD?
Date: Fri, 10 Sep 2021 01:24:09 +0000


561 - 580 of 53179