Date   

Re: Emergency landing witnessed

Sam Hoskins
 

Thanks for sharing that Rodney.

Sam

On Tue, Sep 21, 2021, 8:49 PM Rodney Herzig <zzigster@...> wrote:
https://youtu.be/hRzUAs8ITzM

Here is video taken during Dave Dugas’s engine failure while enroute to Enid and the communication between him and I during the emergency as it it happened.

Rod Herzig
CozyIII
N399BR






Re: Laser altimeter

 

Thanks 

Mike N


On Sep 21, 2021, at 2:46 PM, Jay Scheevel <jay@...> wrote:



Hi Mike,

 

Lightware.com  I don’t use mine except for landing. The range is too small for using for terrain avoidance, so I don’t recommend it for that.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike via groups.io
Sent: Tuesday, September 21, 2021 6:27 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Laser altimeter

 

Jay,

I was looking on the list and didn’t see a website to go to. Being in the hills I think that’s a interesting idea for me also.

Any direction would be appreciated 

 

Thanks 

 

Mike N.   200QK

 



On Sep 21, 2021, at 3:36 AM, Jay Scheevel <jay@...> wrote:



I should point out that this model only has serial output, so you need to have an instrument that reads and decodes that. If you want to use analog voltage as output, as I am doing, you will need to look at their other models, such as the SF11C which is what I have.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jay Scheevel
Sent: Tuesday, September 21, 2021 7:21 AM
To: main@Q-List.groups.io
Subject: [Q-List] Laser altimeter

 

Some of you were asking me where I got my precision downward-looking laser altimeter. Here is a model like what I am using, greatly discounted in price. You can hit their website for more info. It is very small, about 3 inches tall. I can help you with install.

 

Cheers,

Jay


Re: Emergency landing witnessed

Anthony P
 

Thanks for posting.

Great job by both of you.

Power slide at the end there must be good for some extra points.


Emergency landing witnessed

Rodney Herzig
 

https://youtu.be/hRzUAs8ITzM

Here is video taken during Dave Dugas’s engine failure while enroute to Enid and the communication between him and I during the emergency as it it happened.

Rod Herzig
CozyIII
N399BR


Re: Laser altimeter

Rick Hole
 

There are links at the bottom of this email.  Look for the one “Your subscription”.  That will take you to the website

 

Rick Hole

 

From: main@Q-List.groups.io [mailto:main@Q-List.groups.io] On Behalf Of Mike via groups.io
Sent: Tuesday, September 21, 2021 6:27 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Laser altimeter

 

Jay,

I was looking on the list and didn’t see a website to go to. Being in the hills I think that’s a interesting idea for me also.

Any direction would be appreciated 

 

Thanks 

 

Mike N.   200QK

 



On Sep 21, 2021, at 3:36 AM, Jay Scheevel <jay@...> wrote:



I should point out that this model only has serial output, so you need to have an instrument that reads and decodes that. If you want to use analog voltage as output, as I am doing, you will need to look at their other models, such as the SF11C which is what I have.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jay Scheevel
Sent: Tuesday, September 21, 2021 7:21 AM
To: main@Q-List.groups.io
Subject: [Q-List] Laser altimeter

 

Some of you were asking me where I got my precision downward-looking laser altimeter. Here is a model like what I am using, greatly discounted in price. You can hit their website for more info. It is very small, about 3 inches tall. I can help you with install.

 

Cheers,

Jay


Re: Laser altimeter

Jay Scheevel
 

Hi Mike,

 

Lightware.com  I don’t use mine except for landing. The range is too small for using for terrain avoidance, so I don’t recommend it for that.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Mike via groups.io
Sent: Tuesday, September 21, 2021 6:27 PM
To: main@q-list.groups.io
Subject: Re: [Q-List] Laser altimeter

 

Jay,

I was looking on the list and didn’t see a website to go to. Being in the hills I think that’s a interesting idea for me also.

Any direction would be appreciated 

 

Thanks 

 

Mike N.   200QK

 



On Sep 21, 2021, at 3:36 AM, Jay Scheevel <jay@...> wrote:



I should point out that this model only has serial output, so you need to have an instrument that reads and decodes that. If you want to use analog voltage as output, as I am doing, you will need to look at their other models, such as the SF11C which is what I have.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jay Scheevel
Sent: Tuesday, September 21, 2021 7:21 AM
To: main@Q-List.groups.io
Subject: [Q-List] Laser altimeter

 

Some of you were asking me where I got my precision downward-looking laser altimeter. Here is a model like what I am using, greatly discounted in price. You can hit their website for more info. It is very small, about 3 inches tall. I can help you with install.

 

Cheers,

Jay


Re: Laser altimeter

 

Jay,
I was looking on the list and didn’t see a website to go to. Being in the hills I think that’s a interesting idea for me also.
Any direction would be appreciated 

Thanks 

Mike N.   200QK



On Sep 21, 2021, at 3:36 AM, Jay Scheevel <jay@...> wrote:



I should point out that this model only has serial output, so you need to have an instrument that reads and decodes that. If you want to use analog voltage as output, as I am doing, you will need to look at their other models, such as the SF11C which is what I have.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jay Scheevel
Sent: Tuesday, September 21, 2021 7:21 AM
To: main@Q-List.groups.io
Subject: [Q-List] Laser altimeter

 

Some of you were asking me where I got my precision downward-looking laser altimeter. Here is a model like what I am using, greatly discounted in price. You can hit their website for more info. It is very small, about 3 inches tall. I can help you with install.

 

Cheers,

Jay


Re: Is there a way I can remain a part of the group and not receive an email everytime anyone writes anything.

Jay Scheevel
 

Hmmm…  my wife never subscribed. Wonder what that means?  😉

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Sam Hoskins
Sent: Tuesday, September 21, 2021 7:57 AM
To: main@q-list.groups.io
Subject: Re: [Q-List] Is there a way I can remain a part of the group and not receive an email everytime anyone writes anything.

 

Brian, go into the settings and you can choose daily digest. That will lump all the emails together. My wife has been doing that for years.

 

S

 

On Mon, Sep 20, 2021, 11:49 PM Brian Hutchinson via groups.io <brianmh13=yahoo.com@groups.io> wrote:

I'm afraid my email account Storage is going to be made full from the volume of email from this. 


Re: Is there a way I can remain a part of the group and not receive an email everytime anyone writes anything.

Sam Hoskins
 

Brian, go into the settings and you can choose daily digest. That will lump all the emails together. My wife has been doing that for years.

S

On Mon, Sep 20, 2021, 11:49 PM Brian Hutchinson via groups.io <brianmh13=yahoo.com@groups.io> wrote:
I'm afraid my email account Storage is going to be made full from the volume of email from this. 


Re: Laser altimeter

Jay Scheevel
 

I should point out that this model only has serial output, so you need to have an instrument that reads and decodes that. If you want to use analog voltage as output, as I am doing, you will need to look at their other models, such as the SF11C which is what I have.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Jay Scheevel
Sent: Tuesday, September 21, 2021 7:21 AM
To: main@Q-List.groups.io
Subject: [Q-List] Laser altimeter

 

Some of you were asking me where I got my precision downward-looking laser altimeter. Here is a model like what I am using, greatly discounted in price. You can hit their website for more info. It is very small, about 3 inches tall. I can help you with install.

 

Cheers,

Jay


Re: Successful drive home

Dave Dugas
 

I'll definitely be taking pictures and asking for answers. 


On Tue, Sep 21, 2021 at 9:21 AM, Jay Scheevel
<jay@...> wrote:

Great you are home, Dave. Rest up and let us know what is in your “Christmas gift”  😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Dave Dugas via groups.io
Sent: Monday, September 20, 2021 10:41 PM
To: Q_List <q-list@groups.io>
Subject: [Q-List] Successful drive home

 

Hi All

Just to let everyone know, I got my Q2 home safely, "landing" back in Orange at 11:30 pm EDT. I'm beat after all that driving, so I'll follow up with more details when I get a little rest. Bruce and Joanne, Rod, Jon, Kevin and Keith, I can't thank you enough for coming to the rescue. I'll be in touch soon. This entire Q group is really pretty special.... the best. I'm going to get to work as soon as I can with the repair of N68DD. You'll hear from me soon.

Dave D

 


Re: Successful drive home

Jay Scheevel
 

Great you are home, Dave. Rest up and let us know what is in your “Christmas gift”  😊

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Dave Dugas via groups.io
Sent: Monday, September 20, 2021 10:41 PM
To: Q_List <q-list@groups.io>
Subject: [Q-List] Successful drive home

 

Hi All

Just to let everyone know, I got my Q2 home safely, "landing" back in Orange at 11:30 pm EDT. I'm beat after all that driving, so I'll follow up with more details when I get a little rest. Bruce and Joanne, Rod, Jon, Kevin and Keith, I can't thank you enough for coming to the rescue. I'll be in touch soon. This entire Q group is really pretty special.... the best. I'm going to get to work as soon as I can with the repair of N68DD. You'll hear from me soon.

Dave D

 


Re: Is there a way I can remain a part of the group and not receive an email everytime anyone writes anything.

Jay Scheevel
 

Hit the link at the bottom of the note that says “Your Subscription”. It will bring up a web page with all of your options, including not receiving e-mail. That will allow you to continue to check the correspondence only on the web client.

 

Cheers,

Jay

 

From: main@Q-List.groups.io <main@Q-List.groups.io> On Behalf Of Brian Hutchinson via groups.io
Sent: Monday, September 20, 2021 10:50 PM
To: main@Q-List.groups.io
Subject: [Q-List] Is there a way I can remain a part of the group and not receive an email everytime anyone writes anything.

 

[Edited Message Follows]

I'm afraid my email account Storage is going to be made full from the volume of email from this. 


Laser altimeter

Jay Scheevel
 

Some of you were asking me where I got my precision downward-looking laser altimeter. Here is a model like what I am using, greatly discounted in price. You can hit their website for more info. It is very small, about 3 inches tall. I can help you with install.

 

Cheers,

Jay

 

From: hello@... <hello@...>
Sent: Tuesday, September 21, 2021 3:03 AM
To: jay@...
Subject: SF22/C End of Range Sale

 

Can't read or see images? View this email in a browser

 


Re: Field Of Dreams 2021 Pictures

Dave Dugas
 

Keith
The pictures sure are nice.... been downloading them all. Thankfully you thought to get the photos while loading up the plane, without a scratch. I'm grateful. A professional job for sure. Thanks!
Dave D



On Tue, Sep 21, 2021 at 9:07 AM, Keith Welsh
<kw544@...> wrote:
Hey Bruce,
Finally got the time to look at all the great photos.
Goooood memories.  They will all go into a file for future reminiscing.  
Thanks for posting em.
 
So glad you made it home ok Dave.  We were worried about you driving that hard.  And thanks for allowing me to help with the rescue.
You have a good library of photos for memories.
 
And I really enjoyed reading everyone's flight reports.  I can certainly relate.  It seems we all had a decision or two to make.
 
Thanks again to everyone for making this a memorable weekend.
I couldn't have enjoyed it more.
Keith
 


---------- Original Message ----------
From: "Bruce Crain" <jcrain2@...>
To: main@q-list.groups.io
Subject: [Q-List] Field Of Dreams 2021 Pictures
Date: Mon, 20 Sep 2021 16:13:23 -0500

Enjoy the pics!  Not an ugly one in the bunch!
Bruce and Honey Lamb


____________________________________________________________
Choose to be safer online.
Opt-in to Cyber Safety with NortonLifeLock.
Plans starting as low as $6.95 per month.*
https://store.netzero.net/account/showService.do?serviceId=nz-nLifeLock&utm_source=mktg&utm_medium=taglines&utm_campaign=nzlifelk_launch&utm_content=tag695&promoCode=A34454





Re: Field Of Dreams 2021 Pictures

 

Hey Bruce,
Finally got the time to look at all the great photos.
Goooood memories.  They will all go into a file for future reminiscing.  
Thanks for posting em.
 
So glad you made it home ok Dave.  We were worried about you driving that hard.  And thanks for allowing me to help with the rescue.
You have a good library of photos for memories.
 
And I really enjoyed reading everyone's flight reports.  I can certainly relate.  It seems we all had a decision or two to make.
 
Thanks again to everyone for making this a memorable weekend.
I couldn't have enjoyed it more.
Keith
 


---------- Original Message ----------
From: "Bruce Crain" <jcrain2@...>
To: main@q-list.groups.io
Subject: [Q-List] Field Of Dreams 2021 Pictures
Date: Mon, 20 Sep 2021 16:13:23 -0500

Enjoy the pics!  Not an ugly one in the bunch!
Bruce and Honey Lamb


____________________________________________________________
Choose to be safer online.
Opt-in to Cyber Safety with NortonLifeLock.
Plans starting as low as $6.95 per month.*
https://store.netzero.net/account/showService.do?serviceId=nz-nLifeLock&utm_source=mktg&utm_medium=taglines&utm_campaign=nzlifelk_launch&utm_content=tag695&promoCode=A34454





Re: Successful drive home

Bruce Crain
 

You’re an animal Dave!  Good Quickie form mate!  Glad everyone could help and encourage!
Bruce


On Sep 20, 2021, at 11:40 PM, Dave Dugas via groups.io <davedq2@...> wrote:

Hi All
Just to let everyone know, I got my Q2 home safely, "landing" back in Orange at 11:30 pm EDT. I'm beat after all that driving, so I'll follow up with more details when I get a little rest. Bruce and Joanne, Rod, Jon, Kevin and Keith, I can't thank you enough for coming to the rescue. I'll be in touch soon. This entire Q group is really pretty special.... the best. I'm going to get to work as soon as I can with the repair of N68DD. You'll hear from me soon.
Dave D





Re: Another flight report

Anthony P
 

Turns out, it was exactly where it needed to be!  :)

Thank goodness for civil defense investment.
Or, maybe they just knew that VWs were going to be in the air.  ;)


Re: Successful drive home

Jerry Marstall
 

Wonderful. Thks for checkin. Jerry 


On Tue, Sep 21, 2021, 12:40 AM Dave Dugas via groups.io <davedq2=yahoo.com@groups.io> wrote:
Hi All
Just to let everyone know, I got my Q2 home safely, "landing" back in Orange at 11:30 pm EDT. I'm beat after all that driving, so I'll follow up with more details when I get a little rest. Bruce and Joanne, Rod, Jon, Kevin and Keith, I can't thank you enough for coming to the rescue. I'll be in touch soon. This entire Q group is really pretty special.... the best. I'm going to get to work as soon as I can with the repair of N68DD. You'll hear from me soon.
Dave D



Re: Another flight report

Jerry Marstall
 

Wow, that airstrip is a long way from nowhere.


On Mon, Sep 20, 2021, 4:51 PM Robert Cringely <bob@...> wrote:
I believe Enid was on the LEFT side.

On Mon, Sep 20, 2021 at 1:04 PM Sam Hoskins <sam.hoskins@...> wrote:
So, I might as well throw my flight report in. In these times of COVID we want to maintain social distancing so I decided to just make it a day trip to the FOD. The trip from Southern Illinois Airport, KMDH, to KWDG is 417 nautical miles. I left Carbondale right before the tower opened and flew for about half an hour on top of some broken low-lying fog.   I had updated my Garmin 196 database day before, but when I got to the airport I was dismayed to find that Oklahoma was not in it. Since I last updated the database, they split the USA into two halves. Carbondale is on the right side and Enid was in the wrong side.  So I just used Avare on my tablet which was fine. It was nice and smooth and I used flight following so Sandy could follow my progress. It was a good trip. Two hours and 45 minutes. Bruce said he was following me on FlightAware I said I was doing about 200 miles an hour.   My Dynon was showing 180 mph TAS.

I made it to Enid just in time to say hello and then goodbye to Dave Dugas and the rest of his pit crew.

It was nice hanging around with the remainder of the group and a nice pizza was served up by Honey Lamb. I also was awarded a nifty little trophy for the High Time Quickie. I'm showing 2,080 hours right now.

I departed a little before 3:00, it was quite a bit bumpier than the arrival trip. You can see looking on FlightAware (N202SH) the morning flight was a lot straighter than the bumpy afternoon flight. You can also tell that I don't have an autopilot. The  headwind was about on my nose, so I was only making about 150 kts. groundspeed, sometimes worse.

About 80 miles out, I flew directly over the Pauhuska H76 airport at 5,500 feet,  I could see Dave's yellow truck still in front of the hanger. This was about 3:30 in the afternoon.

My engine is producing some noise over the radio, which made it challenging to pick up all the frequencies that ATC was giving me. I'll have to work on that one,  it might have something to do with my electronic ignition.

Further along, there were some beautiful cumulus, making the ride very very pretty. Enid to Carbondale landed at the 3-hour mark. The runway next to our T-hangers sure looks skinny compared to the Enid runway.

So it was a good day with almost six hours of flying  and I was rewarded with a beautiful wife and an adult beverage.

About 9:00 the next morning, I got a call from Dave dugas, and he was in Dayton Ohio already! Turns out he drove most of the night, with just a 2-hour nap in there somewhere. What a madman.

Thanks again to Bruce and Joanne you guys did a great job as usual. I wonder who's going to take care of it next year?

Sam Hoskins
Q-200

2921 - 2940 of 55667